[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [Elist Home]
Subject: Re: DOCBOOK-APPS: little problem with indexterms
Peter Eisentraut wrote: > First, try to use the latest stylesheet release (1.74b). It contains a > few fixes related to indexes. done since before i sent my first mail. > Second, show an actual example that exhibits the behavior you observed. > Simple index terms like you show above are known to work, but there are > some contexts that have been the cause of trouble. But it's impossible to > know without seeing the context. you're right. here's an example that should work but doesn't: <figure id="harddrake-soundwizard"> <title>HardDrake - Sound Wizard</title> <mediaobject>&harddrake-soundwizard;</mediaobject> </figure> <para> <indexterm><primary>HardDrake</primary><secondary>Sound Wizard</secondary></indexterm> <indexterm><primary>ISA card</primary> </indexterm> <indexterm><primary>IO</primary><secondary>settings</secondary></indexterm> <indexterm><primary>IRQ</primary><secondary>settings</secondary></indexterm> You can change the current selection, but in most cases it is not a good idea, as the detected device is already highlighted. For an &isa; card you need to specify the &io; and &irq; settings if the values proposed by default are not correct. After checking configuration, press the <guimenu>OK</guimenu> button to test the configuration. Three samples should be played (if MIDI is available and you have a sound card supporting 16 bit &dma; channels). If you did not hear them without any error messages, it may be due to one of the following reasons: </para> so i don't get it :( if i find something, i'll let you all know. kris
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [Elist Home]
Powered by eList eXpress LLC