OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

docbook-apps message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [docbook-apps] Incorrect page numbers in index for indextermswithin mediaobjects?


Hi Bob,

oddly enough, when I turn the xep.extensions on, I get that same set of 
errors. If I process the file with fop1.extensions on and xep.extensions 
off, the XEP produces the file and the index entries all pointing to the 
title page of the chapter...

If I process using FOP, I get the index as well, but the PDFs aren't 
rendered on the actual pages.

--Scott

Bob Stayton wrote:
> Hi Scott,
> I tried processing your chapter, and XEP reports:
> 
> [error] no entries for index key 'TEST'
> [error] no entries for index key 'TEST2'
> [error] no entries for index key 'TEST3'
> 
> and there are no page numbers in the index.  Did you do some customization
> regarding indexterms inside objectinfo?  I'm not getting any index markers
> at all for those indexterms.
> 
> Bob Stayton
> Sagehill Enterprises
> bobs@sagehill.net
> 
> 
> ----- Original Message -----
> From: "Scott Hudson" <scott.hudson@flatironssolutions.com>
> To: "Scott Hudson" <scott.hudson@flatironssolutions.com>
> Cc: "John Brown" <johnbrown105@hotmail.com>;
> <docbook-apps@lists.oasis-open.org>
> Sent: Tuesday, September 30, 2008 1:23 PM
> Subject: [docbook-apps] Incorrect page numbers in index for indexterms
> within mediaobjects?
> 
> 
>> Folks,
>>
>> Now that I can include external pages in my document, I want to be able to
>> add indexterms to them. When I generate the index, however, the page
>> numbers aren't quite right. These should each end up on a separate page.
>> Instead, I get:
>> T
>> TEST, 144, 144
>> TEST2, 144
>> TEST3, 144
>>
>> Here's my source:
>> <chapter>
>>          <title>Case Study</title>
>>          <mediaobject>
>>
>> <objectinfo><indexterm><primary>TEST</primary></indexterm></objectinfo>
>>              <imageobject>
>>                  <imagedata fileref="casestudy_001.pdf" scalefit="1"
>> width="100%" contentdepth="100%" format="PDF"/>
>>              </imageobject>
>>          </mediaobject>
>>          <para/>
>>          <mediaobject>
>>
>> <objectinfo><indexterm><primary>TEST2</primary></indexterm></objectinfo>
>>              <imageobject>
>>                  <imagedata fileref="casestudy_002.pdf" scalefit="1"
>> width="100%" contentdepth="100%" format="PDF"/>
>>              </imageobject>
>>          </mediaobject>
>>          <para/>
>>          <mediaobject>
>>
>> <objectinfo><indexterm><primary>TEST3</primary></indexterm></objectinfo>
>>              <imageobject>
>>                  <imagedata fileref="casestudy_003.pdf" scalefit="1"
>> width="100%" contentdepth="100%" format="PDF"/>
>>              </imageobject>
>>          </mediaobject>
>>          <para/>
>>          <mediaobject>
>>
>> <objectinfo><indexterm><primary>TEST</primary></indexterm></objectinfo>
>>              <imageobject>
>>                  <imagedata fileref="casestudy_004.pdf" scalefit="1"
>> width="100%" contentdepth="100%" format="PDF"/>
>>              </imageobject>
>>          </mediaobject>
>>      </chapter>
>>
>> Ideas?
>>
>> Thanks,
>>
>> --Scott
>>
>> Scott Hudson wrote:
>>> Thanks, John! I had to add an additional template to contain the
>>> chapter, but otherwise works like a charm!
>>>
>>>      <xsl:template match="chapter[@role='external-doc']">
>>>          <xsl:apply-imports />
>>>      </xsl:template>
>>>
>>>      <xsl:template match="chapter[@role='external-doc']/mediaobject">
>>>          <fo:block xmlns:fo="http://www.w3.org/1999/XSL/Format";
>>> font-size="0"
>>>              line-height="0" break-before="page"
>>>              break-after="page"   start-indent="0" end-indent="0">
>>>              <xsl:apply-imports/>
>>>          </fo:block>
>>>      </xsl:template>
>>>
>>> Best regards,
>>>
>>> --Scott
>>>
>>>
>>> John Brown wrote:
>>>> Scott Hudson <scott.hudson <at> flatironssolutions.com> writes:
>>>>
>>>>> John Brown and Jirka Kosek both had good suggestions to split the case
>>>>> study into individual pages using pdftk and then use mediaobject.
>>>>>
>>>>> This approach seems to work pretty well, although the generated index
>>>>> entries don't seem to point to the same page where the image is
>>>>> rendered
>>>>> (pretty close, though).
>>>>>
>>>> Never used indexterm, so I have no idea.
>>>>
>>>> <! -- Docbook code snipped -->
>>>>
>>>>> The biggest problem I'm having now is that the image doesn't appear to
>>>>> scale the entire width of the page. I'm using XEP, but FOP 0.95 does
>>>>> the
>>>>> same (or worse).
>>>>>
>>>>> What am I missing? I've tried width="100%" but that also errors. I've
>>>>> also tried setting the default.image.width param, but that doesn't seem
>>>>> to work either.
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Thanks and best regards,
>>>>>
>>>>> --Scott
>>>> DocBook is making the image fit within the margins. The answer is
>>>> to define custom page masters with left and right margins = 0.
>>>> Maybe you will also want to suppress the normal DocBook headers
>>>> and footers with titles and page numbers.
>>>>
>>>> The following code allows you to write
>>>> <appendix role='external-doc'>
>>>>   <mediaobject>
>>>>     ...
>>>>   </mediaobject>
>>>>   <mediaobject>
>>>>     ...
>>>>   </mediaobject>
>>>>   <!-- etc. -->
>>>> </appendix>
>>>>
>>>> If your external page is the same size as your DocBook page, it will
>>>> take up the entire page.
>>>>
>>>> <xsl:template name="user.pagemasters">
>>>>   <fo:simple-page-master master-name="back-odd-body-only"
>>>>                            page-width="{$page.width}"
>>>>                            page-height="{$page.height}"
>>>>                            margin-top="0"
>>>>                            margin-bottom="0"
>>>>                            margin-left="0"
>>>>                            margin-right="0">
>>>>       <xsl:if test="$axf.extensions != 0">
>>>>         <xsl:call-template name="axf-page-master-properties">
>>>>           <xsl:with-param
>>>> name="page.master">back-odd-body-only</xsl:with-param>
>>>>         </xsl:call-template>
>>>>       </xsl:if>
>>>>       <fo:region-body margin-bottom="0"
>>>>                       margin-top="0"
>>>>                       column-gap="{$column.gap.back}"
>>>>                       column-count="{$column.count.back}">
>>>>       </fo:region-body>
>>>>
>>>>     </fo:simple-page-master>
>>>>
>>>>     <fo:simple-page-master master-name="back-even-body-only"
>>>>                            page-width="{$page.width}"
>>>>                            page-height="{$page.height}"
>>>>                            margin-top="0"
>>>>                            margin-bottom="0"
>>>>                            margin-left="0"
>>>>                            margin-right="0">
>>>>       <xsl:if test="$axf.extensions != 0">
>>>>         <xsl:call-template name="axf-page-master-properties">
>>>>           <xsl:with-param
>>>> name="page.master">back-even-body-only</xsl:with-param>
>>>>         </xsl:call-template>
>>>>       </xsl:if>
>>>>       <fo:region-body margin-bottom="0"
>>>>                       margin-top="0"
>>>>                       column-gap="{$column.gap.back}"
>>>>                       column-count="{$column.count.back}">
>>>>       </fo:region-body>
>>>>     </fo:simple-page-master>
>>>>
>>>>     <fo:page-sequence-master master-name="back-body-only">
>>>>       <fo:repeatable-page-master-alternatives>
>>>>         <fo:conditional-page-master-reference master-reference="blank"
>>>>
>>>> blank-or-not-blank="blank"/>
>>>>         <fo:conditional-page-master-reference
>>>> master-reference="back-first"
>>>>                                               page-position="first"/>
>>>>         <fo:conditional-page-master-reference
>>>> master-reference="back-odd-body-only"
>>>>                                               odd-or-even="odd"/>
>>>>         <fo:conditional-page-master-reference odd-or-even="even">
>>>>           <xsl:attribute name="master-reference">
>>>>             <xsl:choose>
>>>>               <xsl:when test="$double.sided
>>>> !=0">back-even-body-only</xsl:when>
>>>>               <xsl:otherwise>back-odd-body-only</xsl:otherwise>
>>>>             </xsl:choose>
>>>>           </xsl:attribute>
>>>>         </fo:conditional-page-master-reference>
>>>>       </fo:repeatable-page-master-alternatives>
>>>>     </fo:page-sequence-master>
>>>>
>>>>   </xsl:template>
>>>>
>>>> <xsl:template name="select.user.pagemaster">
>>>>   <xsl:param name="element"/>
>>>>   <xsl:param name="pageclass"/>
>>>>   <xsl:param name="default-pagemaster"/>
>>>>
>>>>   <!-- Return my customized title page master name if for titlepage,
>>>>        otherwise return the default -->
>>>>
>>>>   <xsl:choose>
>>>>     <xsl:when test="@role = 'external-doc'">
>>>>       <xsl:value-of select="'back-body-only'" />
>>>>     </xsl:when>
>>>>     <xsl:otherwise>
>>>>       <xsl:value-of select="$default-pagemaster"/>
>>>>     </xsl:otherwise>
>>>>   </xsl:choose>
>>>>   </xsl:template>
>>>>
>>>>   <xsl:template match="d:appendix[@role='external-doc']/d:mediaobject">
>>>>     <fo:block xmlns:fo="http://www.w3.org/1999/XSL/Format"; font-size="0"
>>>> line-height="0" break-before="page"
>>>>               break-after="page"   start-indent="0" end-indent="0">
>>>>       <xsl:apply-imports/>
>>>>     </fo:block>
>>>>   </xsl:template>
>>>>
>>>> I am not sure if the back-body-even-only and back-body-odd-only
>>>> page masteres are strictly necessary.
>>>>
>>>> See the following thread:
>>>> http://thread.gmane.org/gmane.text.docbook.apps/19707
>>>>
>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: docbook-apps-unsubscribe@lists.oasis-open.org
>>>> For additional commands, e-mail: docbook-apps-help@lists.oasis-open.org
>>>>
>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: docbook-apps-unsubscribe@lists.oasis-open.org
>>> For additional commands, e-mail: docbook-apps-help@lists.oasis-open.org
>>>
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: docbook-apps-unsubscribe@lists.oasis-open.org
>> For additional commands, e-mail: docbook-apps-help@lists.oasis-open.org
>>
>>
>>
> 
> 



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]