Re: [docbook-apps] XREF text/label issue

I confirm that :

1) sections are not numbered ;
2) generated text for XREF's : no "..." surrounding text (no << ... >> in French) ; number followed by a point, not a comma. Example : Figure 1.4. Les classes

--
Christophe HARO
Christophe.HARO@free.fr
----------------------------

----- "deannelson" <deannelson@aol.com> a écrit :

> Ok, I tested this with the snapshot for 27-Aug-10 and it did not work
> right. So the issue appears to be in the repository stylesheets.
>
> The symptoms are that there are no number labeling at all except for
> the TOC.
>
> Can anyone confirm this?
>
> Here is the xml and style sheet:
> ---------------
> <?xml version="1.0" encoding="ISO-8859-1" standalone="no"?>
> <!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "
> http://www.docbook.org/xml/4.5/docbookx.dtd ">
> > <chapter><title>Test</title>
> <section>
> <title>Calibration Schedule</title>
>
> <para>Check number 2 calibration using the <emphasis
> role="bold">froggy</emphasis>
> procedures. See <xref linkend="TCL-sys"/>. </para>
> </section>
>
> <section id="TCL-sys">
>
> <title>Tension Control Link</title>
>
> <para>This system is used to verify calibration and provides a
> completely independent check
> of force measurement calibration. The Tension Calibration System is
> traceable to the U.S.
> National Institute of Standards and Technology. Needed to perform the
> calibration are two
> wood-faced steel paddles for insertion into the clamps, a tension load
> cell with steel pins
> for attachment to the paddles and a readout (TCL).< /para>
> </section>
> </chapter>
> -----------------------------
>
> Customization XSL
> -----------------------------
> <?xml version="1.0" encoding="UTF-8"?>
> <xsl:stylesheet xmlns:xsl=" http://www.w3.org/1999/XSL/Transform "
> version="1.0"
> xmlns:fo=" http://www.w3.org/1999/XSL/Format ">
>
> 
> <xsl:import href="../../doctools/docbook-xsl-1.75.2/fo/docbook.xsl"/>
>
> <xsl:param name="xref.with.number.and.title">1</xsl:param>
> <xsl:param name="section.label.includes.component.label">1</xsl:param>
> <xsl:param name="section.autolabel">1</xsl:param>
> <xsl:param name="section.autolabel.max.depth">10</xsl:param>
> <xsl:param name="chapter.autolabel">1</xsl:param>
> <xsl:param name="gener ate.section.toc.level">2</xsl:param>
> <xsl:param name="toc.max.depth" select="6"></xsl:param>
>
> <xsl:param name="label.from.part" select="1"></xsl:param>
> <xsl:param name="component.label.includes.part.label"
> select="1"></xsl:param>
> </xsl:stylesheet>
>
>
>
>
> In a message dated 09/03/10 11:56:21 Pacific Daylight Time, deannelson
> writes:
>
>
>
> Bob,
> I'm using just the simple xrefs with linkends pointing to IDs. That's
> what is so strange.
>
> OK I just did some testing with clean 1.75.2 and it works as
> advertised with and without my customization. I had done some updates
> to the 1.75.2 from the subversion that seems to have broken some of
> the labeling. So maybe I need to try the new release candidate first
> before I try to dig out the updat es to 1.75.2.
>
> More later...
>
> Dean
>
>
> In a message dated 09/03/10 11:12:03 Pacific Daylight Time,
> bobs@sagehill.net writes:
>
>
>
> Hi Dean,
> I can't duplicate you problem. I just tried a small customization that
> imports 1.75.2 and sets the params you listed, and I get xrefs to
> sections showing as:
>
> Section 1.2, "Section Title"
>
> So it seems to work in the base stylesheets, and I cannot tell what is
> going wrong on your system. Are you using xrefstyle attributes in your
> xrefs?
>
> Bob Stayton
> Sagehill Enterprises
> bobs@sagehill.net
>
>
>
>
> ----- Original Message -----
> From: deannelson
> To: docbook-apps@lists.oasis-open.org
> Sent: Friday, September 03, 2010 10:39 AM
> Subject: [docbook-apps] XREF text/label is sue
>
>
> Hello,
>
> I have an issue that has either popped up or I just realized it. It
> has to do with the XREF in certain instances it does not display the
> numbered sections (i.e "see 1.2.3 Start Up Procedures "). This is
> correct when referencing figures and chapters, but it leaves off the
> number reference on sections and procedures and just leaves the title.
>
> I'm pretty sure I have done something silly in the customization so I
> tried a bare 1.75.2 stylesheet with the following additions but could
> not seem to activate the number references, so I can't really say for
> sure that it happens in the stock stylesheets.
>
>
> <xsl:param name="xref.with.number.and.title">1</xsl:param>
> <xsl:param name="section.label.includes.component.label">1</xsl:param>
> <xsl:param name="section.autolabel">1</xsl:p aram>
> <xsl:param name="section.autolabel.max.depth">10</xsl:param>
> <xsl:param name="chapter.autolabel">1</xsl:param>
> <xsl:param name="generate.section.toc.level">2</xsl:param>
> <xsl:param name="toc.max.depth" select="6"></xsl:param>
>
> <xsl:param name="label.from.part" select="1"></xsl:param>
> <xsl:param name="component.label.includes.part.label"
> select="1"></xsl:param>
>
>
> So two questions:
> 1. What do I need to do to activate the numbered references on the
> above customization. I would assume that the first line should do it?
> 2. Any ideas where to check? Is this a design issue in the DB XSL that
> I missed?
>
> Thanks
> Dean Nelson

---------------------------------------------------------------------
To unsubscribe, e-mail: docbook-apps-unsubscrib e@lists.oasis-open.org
For additional commands, e-mail: docbook-apps-help@lists.oasis-open.org

docbook-apps message