docbook-apps message

Subject: Re: [docbook-apps] jing errore with <entrytbl>

From: Radu Coravu <radu_coravu@sync.ro>
To: docbook-apps@lists.oasis-open.org
Date: Wed, 4 May 2016 10:57:49 +0300

Hi Ron, Bob,

I can confirm the problem is on our side, the validation should notreport any problem with that particular table structure.

The next Oxygen 18.0 minor bug fix release will have this problem solved.

Regards,
Radu

Radu Coravu
<oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger
http://www.oxygenxml.com

On 5/3/2016 11:21 PM, George Bina wrote:

Hi Ron, Bob,

It is not a Jing reported error, those will have "Engine name" as
"Jing" - oXygen includes a table layout validation engine which is
enabled for DocBook by specifying a default validation scenario for the
DocBook5 framework, see Options->Preferences -- Document Type
Association, select the DocBook5 framework and use the Edit action then
on the Validation tab you can find the "DocBook 5" scenario and if you
edit this you can see that it specifies 2 validation units, one is the
default validation with the schema and the other is using the Table
Layout Validator engine which actually reports the problem you mention.
You may remove the second validation or uncheck the scenario as a
default validation scenario in order to apply only default validation.

I will have someone from our team looking over how this sample DocBook
is validated by the table layout validator, thanks!

Best Regards,
George
--
George Cristian Bina
<oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger
http://www.oxygenxml.com

On 03/05/16 21:04, Ron Catterall wrote:

Thanks Bob, I'll report it, but George will probably pick it up from
here.
Ron

On 05/03/2016 11:47 AM, Bob Stayton wrote:

Hi Ron,
I can duplicate this error in Oxygen 18.0.  The first message indicates
that it seems to count all descendant colspecs, not just the current
colspecs.

I tested this outside of Oxygen with jing and it validates properly. I'm
not sure what Oxygen is doing differently, but I suggest you report it
to them.

Bob Stayton
Sagehill Enterprises
bobs@sagehill.net

On 4/29/2016 1:54 PM, Ron Catterall wrote:

This code to center a table on a page does exactly what I want in PDF
output using the default scenario Docbook PDF in oXygen 18.0.  (Saxon
6.5.5 and fop). (xep also gives the output I want.).  But I always get
error conditions from the presence of a <colspec> after <entrytbl> (see
error listing after xml code) from jing.  A <spanspec> after <entrytbl>
is OK.  Docbook 5 says <entrytbl> can contain a <colspec> which can
adjust the relative widths of the columns, and fop and xep are happy
with it and report no errors, fop reports validation OK.  The problem
seems to be in jing.
Has anybody else seen this problem with jing?
(Obviously I can just ignore false errors from jing.)

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE chapter>
<chapter xml:id="chap_n" xmlns="http://docbook.org/ns/docbook";
version="5.0" xml:lang="EN">
        <title>TITLE</title>

<!-- to get title cenered on page we need to adjust the param
body.start.indent to set indent of body text from start of title in a
custom layer, and col widths.  For no ident use:
<xsl:param name="body.start.indent" select="'0pt'"> </xsl:param> -->

<table frame="all" xml:id="Tab01">
    <?dbfo table-width="100.0%" ?>
    <?dbfo keep-together="always" ?>
    <info><title></title></info>
    <tgroup align="center" cols="3">
        <colspec colname="c1" colnum="1" colwidth="0.50*" colsep="0"
rowsep="0"/> <!--- left margin -->
        <colspec colname="c2" colnum="2" colwidth="99.0*" colsep="1"
rowsep="0"/> <!-- table fits in here -->
        <colspec colname="c3" colnum="3" colwidth="0.50*" colsep="0"
rowsep="0"/> <!--- rigjt margin -->
        <spanspec align="center" nameend="c3" namest="c1"
spanname="hspanc"/>
        <tbody valign="middle">
            <row valign="middle">
                <entry/> <!--- left margin -->

<!-- START OF TABLE TO BE CENTERED -->
                <entrytbl align="left" cols="2" rowsep="1" colsep="1">
                    <colspec colname="ccl" colwidth="1.0*"
align="left"/>
                    <colspec colname="cc2" colwidth="8.0*"
align="left"/>
                    <spanspec spanname="hspan"  namest="cc1"
nameend="cc2"/>
                    <spanspec spanname="hspan1" namest="cc1"
nameend="cc1"/>
                    <spanspec spanname="hspan2" namest="cc2"
nameend="cc2"/>
                    <tbody>
                        <row>
                            <entry spanname="hspan1"
colsep="0">ABC:</entry>
                            <entry spanname="hspan2" colsep="0">first
long entry abc def ghi jkl mno pqr stu vwx yz</entry>
                        </row>
                        <row>
                            <entry spanname="hspan1"
colsep="0">DEF:</entry>
                            <entry spanname="hspan2" colsep="0">second
long entry abc def ghi jkl mno pqr stu vwx yz</entry>
                        </row>
                        <row>
                            <entry spanname="hspan1"
colsep="0">GHI:</entry>
                            <entry spanname="hspan2" colsep="0">third
long entry abc def ghi jkl mno pqr stu vwx yz</entry>
                        </row>
                    </tbody>
                </entrytbl>
<!-- END OF TABLE TO BE CENTERED -->

                <entry/> <!-- right margin -->
            </row>
        </tbody>
    </tgroup>
</table>
</chapter>



System ID: /home/ron/Desktop/center_table.xml
Main validation file: /home/ron/Desktop/center_table.xml
Scenario name: DocBook 5
Document type: DocBook 5
Engine name: oXygen
Severity: error
Description: The number of table columns determined from the table
structure (5) is different than the value of the "cols" attribute (3).
Type: Table Layout
Start location: 14:5
End location: 14:37

System ID: /home/ron/Desktop/center_table.xml
Main validation file: /home/ron/Desktop/center_table.xml
Scenario name: DocBook 5
Document type: DocBook 5
Engine name: oXygen
Severity: warning
Description: The number of table columns determined from the table
structure (5) is different than the number of colspecs (3).
Type: Table Layout
Start location: 14:5
End location: 14:37

System ID: /home/ron/Desktop/center_table.xml
Main validation file: /home/ron/Desktop/center_table.xml
Scenario name: DocBook 5
Document type: DocBook 5
Engine name: oXygen
Severity: error
Description: The number of cells in the row (5) is greater than the
value of the table attribute "cols" (3).
Type: Table Layout
Start location: 20:13
End location: 20:34

System ID: /home/ron/Desktop/center_table.xml
Main validation file: /home/ron/Desktop/center_table.xml
Scenario name: DocBook 5
Document type: DocBook 5
Engine name: oXygen
Severity: error
Description: The column name (ccl) from the "colname" attribute
value is
not found in column specifications.
Type: Table Layout
Start location: 25:21
End location: 25:76

System ID: /home/ron/Desktop/center_table.xml
Main validation file: /home/ron/Desktop/center_table.xml
Scenario name: DocBook 5
Document type: DocBook 5
Engine name: oXygen
Severity: error
Description: The column name (cc2) from the "colname" attribute
value is
not found in column specifications.
Type: Table Layout
Start location: 26:21
End location: 26:76


---------------------------------------------------------------------
To unsubscribe, e-mail: docbook-apps-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: docbook-apps-help@lists.oasis-open.org

Follow-Ups:
- Re: [docbook-apps] jing errore with <entrytbl>
  - From: Dave Pawson <davep@dpawson.co.uk>

References:
- Re: [docbook-apps] jing errore with <entrytbl>
  - From: Bob Stayton <bobs@sagehill.net>
- Re: [docbook-apps] jing errore with <entrytbl>
  - From: Ron Catterall <ron@catterall.net>
- Re: [docbook-apps] jing errore with <entrytbl>
  - From: George Bina <george@oxygenxml.com>