[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [OASIS Issue Tracker] Updated: (OFFICE-1823) ISO/IEC JTC 1/SC 34 N1078 : DEFECT REPORT NUMBER JP2-32
[ http://tools.oasis-open.org/issues/browse/OFFICE-1823?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Svante Schubert updated OFFICE-1823:
-------------------------------------
Resolution:
9.4.5 Extrude
Replace:
"The <dr3d:extrude> element represents a three-dimensional extrude based on a polygon."
with:
"The <dr3d:extrude> element represents a three-dimensional extrude object based on the given polygon. The 3D geometry is formed by extruding the polygon perpendicular to the polygon by a depth (see dr3d:depth, 15.22.6), thus creating a front plane, a back plane and side planes. The side planes are formed by connecting all corresponding single edges of the front and back plane. When no depth is given, the polygon forms a plane without depth. The existence of a front plane depends on dr3d:close-front (15.22.9). The existence of a back plane depends on dr3d:close-back (15.22.10). The size of the back plane can be relative to the size of the front plane when dr3d:back-scale (15.22.5) is used. "
9.4.6 Rotate
Replace:
"The <dr3d:rotate> element represents a three-dimensional rotation shape based on a polygon."
with:
"The <dr3d:rotate> element represents a three-dimensional rotation shape based on the given polygon. The 3D geometry is formed by rotating the polygon around its Y-Axis by a number of steps (see dr3d:horizontal-segments 15.22.1). The side planes are formed by connecting all corresponding single edges of a neighbored pair of rotated polygons. By default, the rotation uses a full rotation (360 degrees, see dr3d:end-angle 15.22.8). In that case the 3D geometry is implicitly closed and no front plane or back plane is created. If the rotation is different, a front plane is created using the first, unrotated polygon and a back plane is created using the last rotated polygon. The existence of a front plane also depends on dr3d:close-front (15.22.9) and back plane on dr3d:close-back (15.22.10). The size of the back plane can be relative to the size of the front plane when dr3d:back-scale (15.22.5) is used."
15.22.5 Back Scale
Replace:
"The attribute dr3d:back-scale specifies the proportion of the background geometry for lathe and extrude objects."
with
"The dr3d:back-scale attribute specifies the proportion of the background geometry for 3D rotation and extrude objects."
15.22.8 End Angle
Replace:
"The attribute dr3d:end-angle specifies the rotation angle for 3D lathe objects. If it is the default (360°), the lathe object is closed and completely rotated. With smaller values it is possible to define opened lathe objects (segments). The then visible sides are closed and take into account the dr3d:back-scale and dr3d:edge-rounding attributes. With bigger values it is possible to create lathe objects with more than one rotation. This will only have a visible effect when e.g., dr3d:back-scale is used."
with:
"The attribute dr3d:end-angle specifies the rotation angle for 3D rotation objects. If it is the default (360°), the 3D rotation object is closed and completely rotated. With values less than 360° it is possible to define opened 3D rotation objects (segments). The then visible sides are closed and take into account the dr3d:back-scale and dr3d:edge-rounding attributes. With values greater than 360° it is possible to create 3D rotation objects with more than one rotation. This will only have a visible effect when e.g., dr3d:back-scale is used."
15.22.9 Close Front
Replace:
"The dr3d:close-front property specifies whether a front plane shall be generated. E.g., if an ellipse is extruded, and this attribute is set, the ellipse will have an open front. The attribute can be used with extrudes and lathe objects."
with:
"The dr3d:close-front property specifies whether a front plane shall be generated. E.g., if an ellipse is extruded, and this attribute is set to true, the ellipse will have a closed front. The attribute can be used with 3D extrude objects and 3D rotation objects."
15.22.10 Close Back
Replace:
"The dr3d:close-back property describes if a back plane shall be generated. E.g., if an ellipse is extruded, and this attribute is set, the ellipse will have an open back. The attribute can be used with extrudes and lathe objects."
with:
"The dr3d:close-back property describes if a back plane shall be generated. E.g., if an ellipse is extruded, and this attribute is set to true, the ellipse will have a closed back. The attribute can be used with 3D extrude objects and 3D rotation objects."
was:
15.22.8 End Angle
Replace:
"The attribute dr3d:end-angle specifies the rotation angle for 3D lathe objects. If it is the default (360°), the lathe object is closed and completely rotated. With smaller values it is possible to define opened lathe objects (segments). The then visible sides are closed and take into account the dr3d:back-scale and dr3d:edge-rounding attributes. With bigger values it is possible to create lathe objects with more than one rotation. This will only have a visible effect when e.g., dr3d:back-scale is used."
with:
"The attribute dr3d:end-angle specifies the rotation angle for 3D rotation objects. If it is the default (360°), the 3D rotation object is closed and completely rotated. With values less than 360° it is possible to define opened 3D rotation objects (segments). The then visible sides are closed and take into account the dr3d:back-scale and dr3d:edge-rounding attributes. With values greater than 360° it is possible to create 3D rotation objects with more than one rotation. This will only have a visible effect when e.g., dr3d:back-scale is used."
@Dennis: Thanks for the detailed review. Based on your feed-back, I have changed the following so far:
1) Corrected section numbers and removed brackets on attributes from 9.4.5 Extrude & 9.4.6 Rotate.
2) Replaced 'lathe object' with '3D rotation object' in 15.22.5 End Angle.
Updated the resolution in the issue accordingly.
Still I have some questions to our graphic experts that will return on Tuesday. I will comment your further sub-comments after consulting them.
> ISO/IEC JTC 1/SC 34 N 1078 : DEFECT REPORT NUMBER JP2-32
> --------------------------------------------------------
>
> Key: OFFICE-1823
> URL: http://tools.oasis-open.org/issues/browse/OFFICE-1823
> Project: OASIS Open Document Format for Office Applications (OpenDocument) TC
> Issue Type: Bug
> Affects Versions: ODF 1.0, ODF 1.0 (second edition), ODF 1.0 Errata 02
> Reporter: Robert Weir
> Assignee: Svante Schubert
> Fix For: ODF 1.0 Errata CD 5
>
>
> Transcribed from http://www.itscj.ipsj.or.jp/sc34/open/1078.htm
> Original author: "MURATA Makoto (FAMILY Given)" <eb2m-mrt@asahi-net.or.jp>
> DEFECT REPORT NUMBER JP2-32
> QUALIFIER clarification required
> REFERENCES IN DOCUMENT Clause 15.22.8 thru 15.22.10
> NATURE OF DEFECT These subclauses are incomprehensible.
> SOLUTION PROPOSED BY THE SUBMITTER Add diagrams and introduce more explanatory text.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: http://tools.oasis-open.org/issues/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]