Tracker: PLCS templates  :—Issues for CCB decision

[Index] [Process] [All issues] [In work issues] [Open NoRes issues]

Export date: 2012-12-15 10:24:41

Row Id Category Summary Details Priority Status Resolution Release Submitter Assignee Closer Date raised Date Closed
1 3590065 OASIS:Descriptor constraints need improvement The two constraint blocks defined in this template indicate that they will always produce a result i.e. lower bound 1. Since they are defined to have only optional inputs (all inputs have lower bound 0) there is a logic issue here. Recommend outputs should identify lower bound of 0 since all inputs are optional. 5 Open Remind philsp nobody nobody 2012-11-26 12:36:55 1970-01-01 12:00:00
2 3590089 OASIS:SystemElement Constraint questionable The constraint specified in the template is not specified in OCL. On further investigation it is questionable if the constraint is required (or possibly a better specified constraint). The constraint as specified indicates that the combination of ids, versionIds, viewDefinitionContext and breakdownContext is unique this really resolves to the breakdownContext should have a unique breakdown and breakdownElement, where the breakdownElement is unique. I will raise issues on the PSM to indicate that breakdownContext should have a uniqueness constraint specified and that a productViewDefinition should be unque over version and initial context. 5 Open Remind philsp nobody nobody 2012-11-26 02:57:12 1970-01-01 12:00:00
3 3590325 OASIS:Contract - some constraints required There are a number of logical constraints that can be applied. Not sure if these should be in the PSM or in the template (or both) - I assume that a contact person is a person in the organization of interest, so I would expect to provide either a contractor or a contractorContact (that would provide both the person and the organization) but unlikely to provide both. Similarly with contractee - We probably need a constraint that startDate should be before endDate - assignedTo dates cannot be assigned if there is no assigned to supplied so constraint them so they are only valid if assignedTo is supplied (also need to consider date issue here) 5 Open Remind philsp nobody nobody 2012-11-27 09:47:31 1970-01-01 12:00:00
4 3590328 OASIS:Name is output port correctly typed? In all situations I have checked when the Name template is used the output port is usually double nested to get the PSM Desctiptor block and not the OASISDescriptor template. This leads me to beleive that the Name template should expose the PSM Descriptor as the port and not the OASIS template. 5 Open Remind philsp nobody nobody 2012-11-27 09:59:22 1970-01-01 12:00:00
5 3590398 OASIS:Document general definition multiplicity wrong definition private part should be [0..1]. Also should probably be called generalDefinition to be consistent with the constraint. 5 Open Remind philsp nobody nobody 2012-11-27 04:53:04 1970-01-01 12:00:00
6 3590399 OASISDocument classifications does not use Classifier To be consistent with other OASIS templates Document should use Classifier. 5 Open Remind philsp nobody nobody 2012-11-27 04:57:59 1970-01-01 12:00:00
7 3590716 OASIS:Document - "definition" output port multiplicity The output port for "definition" is of type and multiplicity DocumentDefinition[0..1]. The attribute exposed by this (from documentVersion) is of type and multiplicity DocumentDefinition[0..*]. The multiplicities do not match, 5 Open Remind steve_yates nobody nobody 2012-11-28 03:04:21 1970-01-01 12:00:00
8 3592112 OASIS:DatedEffectivity consistent use? A number of templates make use of the PSM block DatedEffectivity and others use the templateDatedEffectivity. We should be consistent with the usage of the template (if required) or remove the template if the PSM block is the preferred approach. Templates using PSM DataedEffectivity: Classifier Descriptor ProxyItem Identification uses the DatedEffectivity template - but incorrectly colors it - leading to confusion. Recommendation: change the above identified templates to use DatedEffectivity template. 5 Open Remind philsp nobody nobody 2012-12-03 03:12:18 1970-01-01 12:00:00
9 3593568 OASIS:PersonInOrganization multiplicity issues From the description and output port is seems PersonInOrganization is meant to represent a single person in a single organization. However, the organization input has multiplicity 1..* as does the private part personInOrganization. This implies that a collection of PIO's are created by this template and that there is an arbitrary choice of which one from the collection is returned to the output port. Recommendation: Change organization and private part multiplicity to [1] so we are clear that this template creates just one PIO Add additional characterizations to the PIO such as datedEffectivity and possibly role 5 Open Remind philsp nobody nobody 2012-12-07 10:05:50 1970-01-01 12:00:00
10 3594443 OASIS:Observation part/reference confusion for privates Each occurence of the Observation template does not 'Own' the default classes (classObserver & classDateOfObservation), therefore these should be reference properties. The classifiers that apply these classes to the associations (persOrgClassifier & dateClassifier) are owned by the template occurrences so should be parts. Additionally dateClassifier only needs to be optional ie [0..1] since at most only 1 is needed. 4 Open Remind philsp nobody nobody 2012-12-10 11:40:16 1970-01-01 12:00:00
11 3590623 Fix ref data URI The following templates refers to ref data uri which are not in the owl file - ActualMission - Catalog - CatalogItem - CatalogItemStructure - EventReport - FleetItem - PartAssembly - RealizedPartAssembly - ResourcePool - ResourcePoolItem 5 Pending Remind phoubaux phoubaux phoubaux 2012-11-28 06:35:07 2012-11-28 07:46:59
12 3590644 startEffectivityDate should be [0..1] The following templates are using DatedEffectivity template. The property startEffectivityDate should be optional: - ActualMissionItem - PartAssembly - RealizedPartAssembly - ResourcePoolItem 5 Pending Remind phoubaux phoubaux phoubaux 2012-11-28 09:18:21 2012-11-28 10:11:15
1 3525836 OASIS: Breakdown template The Breakdown template describes how to represent a breakdown of a product. A breakdown is identified, classified and contains versions. 5 Pending Accepted fredrik_larsen robbod robbod 2012-05-11 01:51:01 2012-10-02 05:14:48
2 3525838 OASIS: BreakdownElement template The BreakdownElement template describes how to represent elements in a breakdown. The template is based on the existing template representing_breakdown_element but also includes optional realization of breakdownElements. 5 Pending Accepted fredrik_larsen robbod robbod 2012-05-11 01:52:56 2012-10-02 05:16:53
3 3559801 OASIS:Observation fails to assign basic information The OASISObservation template currently only assigns a descriptor to the observation block, other attributes such as observedBy, observedDuring and inContext are not supported by the template meaning these cannot be assigned. 5 Pending Accepted philsp philsp robbod 2012-08-20 10:41:55 2012-10-17 09:42:18
4 3559803 OASIS:ActualActivity - create There are no Activity templates currently defined in the OASIS context. As a result the other contexts are building their own activity templates leading to possible confusion. 5 Pending Accepted philsp robbod robbod 2012-08-20 10:44:15 2012-10-18 02:23:27
5 3567375 OASIS: SystemBreakdown - create Create the System breakdown templates 5 Pending Accepted robbod nobody robbod 2012-09-13 01:36:18 2012-10-01 02:42:28
6 3567402 OASIS:SystemElement - create Create the template OASIS:SystemElement 5 Pending Accepted robbod robbod robbod 2012-09-13 02:59:42 2012-10-16 06:56:53
7 3573368 OASIS:PlannedActivity - create create thePlanned Activity template properties Ids Classification plannedStartDate plannedEndDate Status Approval Creator methodPlanned Inputs 5 Pending Accepted robbod robbod robbod 2012-10-01 06:53:19 2012-10-18 02:30:52
8 3573369 OASIS: Scheme - create Create the Scheme template 5 Pending Accepted robbod robbod robbod 2012-10-01 06:56:59 2012-10-29 07:14:36
9 3573370 OASIS: SchemeEntry - create Create the SchemeElement template 5 Pending Accepted robbod robbod robbod 2012-10-01 06:57:32 2012-10-29 07:15:03
10 3573445 OASIS: ProductConfiguration - create Need a ProductConfiguration template to represent Family/Variant/etc .. of a product. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-01 01:21:25 2012-10-31 09:39:09
11 3573446 OASIS: ProductConfigurationStructure - create Need to represent product configuration structure i.e. Product Family/Variant/Options hierarchy 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-01 01:26:02 2012-10-30 10:51:18
12 3573759 OASIS: ProductConfigurationOptionRelationship - create This template will represent for instance the concept of having a product configuration as an option for another product configuration. i.e.: - A gun configuration can be mounted on a vehicle configuration - A protection kit configuration can be mounted on a vehicle configuration 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-02 09:58:57 2012-10-30 10:45:02
13 3574139 OASIS:Part - missing descriptions Part property viewClassifications defined in XMI but not described in template.xml Part property versionDescriptions defined in XMI but not described in template.xml Part property viewDescriptions defined in XMI but not described in template.xml 5 Pending Accepted robbod nobody robbod 2012-10-03 12:04:25 2012-10-08 02:27:14
14 3574144 OASIS:WorkRequest - missing descriptions WorkRequest property classifications defined in XMI but not described in template.xml 5 Pending Accepted robbod nobody robbod 2012-10-03 12:15:53 2012-10-08 02:27:56
15 3574157 OASIS:Justification - create Create the template It should include: Justification JustificationAssignment JustificationSupportAssignment 5 Pending Accepted robbod robbod robbod 2012-10-03 02:13:51 2012-10-29 07:20:51
16 3574166 OASIS: CatalogItem - create Need a generic template to represent an item in a Catalog 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-03 02:46:11 2012-10-30 09:53:46
17 3574168 OASIS: CatalogItemRealization - create Need a generic template to represent a generic Catalog item realization relationship 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-03 02:48:13 2012-10-30 09:58:06
18 3574403 OASIS:DirectedActivity - create Now that we have removed DirectedActivity from workorder template – on strong insistence from Patrick – I presume that we need the following templates: PlannedActivity – an activity that is planned but not controlled by a workorder ActualActivity – an actual activity that may point back a directed activity or an activity DirectedActivity – a directed activity controlled by a work order I would also suggest that we add PlannedProductUsage – to cover an activity that is planned to be performed by a product – e.g. running the engine ActualProductUsage – to cover an activity that is has to be performed by a product – e.g. sortie flown by a plane 5 Pending Accepted robbod robbod robbod 2012-10-04 06:45:42 2012-10-18 02:27:08
19 3574404 OASIS:ActualProductUsage - create Now that we have removed DirectedActivity from workorder template – on strong insistence from Patrick – I presume that we need the following templates: PlannedActivity – an activity that is planned but not controlled by a workorder ActualActivity – an actual activity that may point back a directed activity or an activity DirectedActivity – a directed activity controlled by a work order I would also suggest that we add PlannedProductUsage – to cover an activity that is planned to be performed by a product – e.g. running the engine ActualProductUsage – to cover an activity that is has to be performed by a product – e.g. sortie flown by a plane 5 Pending Accepted robbod robbod robbod 2012-10-04 06:46:36 2012-10-18 02:27:29
20 3574405 OASIS:BreakdownStructure - create As we have SystemBreakdownStructure - we should have BreakdownStructure 5 Pending Accepted robbod robbod robbod 2012-10-04 06:47:24 2012-10-19 07:57:19
21 3574414 OASIS:WorkOrder - review comments 1) Work order should not be forced to create a directed activity - move the directed activity to the template directed activity 2) Why is teh State Assignment for status classified as "Status"? Is this necessary? If so we woudl need to do this consistently and will probably need a "Status" template 5 Pending Accepted robbod robbod robbod 2012-10-04 08:04:10 2012-10-18 02:35:25
22 3574429 OASIS:Contract - create Create the tempate - Contract 5 Pending Accepted robbod phoubaux robbod 2012-10-04 09:37:55 2012-10-19 07:59:23
23 3574736 OASIS:WorkDone - review comments 1) change the name of property "predictedWork" to directedActivity as that is more meaningful 2) change the name of property "performedMethod" to "methodUsed" as it is more meaningful and in line with template ActivityActual 3) Add location, contract, project, resourceUsed 5 Pending Accepted robbod robbod robbod 2012-10-05 11:26:28 2012-10-18 02:34:39
24 3575410 OASIS:Identification - use datedEffectivity The template date effectivity has been created - the template shoudl use it - rather than instantiating the effectivity. 5 Pending Accepted robbod robbod robbod 2012-10-08 06:32:42 2012-10-08 04:40:14
25 3576071 OASIS:RealizedPart extra binding connectors in XMI There are multiple binding connectors that are not shown one the parametric diagram. This causes errors/confusion when parsing the XMI file. Recommend remove extra binding connectors and possibly write a search routine to ensure these are detected in the authoring software. 5 Pending Accepted philsp robbod robbod 2012-10-10 03:13:35 2012-10-15 01:58:13
26 3576230 OASIS:ActualActivity extra binding connectors in XMI OASIS:ActualActivity extra binding connectors in XMI - not on parm diagram: OASIS::Templates::PersonInOrganization::PersonInOrganization::personInOrganization - SysMLfromEXPRESS::Ap239Ap233Psm::OrganizationOrPersonInOrganizationAssignment::assignedEntity [_17_0_4_28b0143_1349161466254_230507_12805] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:07:36 2012-10-15 01:58:37
27 3576234 OASIS:BreakdownElement extra binding connectors in XMI OASIS:BreakdownElement extra binding connectors in XMI - not on parametric diagram: OASIS::Templates::Part::Part::view - SysMLfromEXPRESS::Ap239Ap233Psm::ProductDefinitionElementRelationship::product [_17_0_45e01b7_1336553958957_976070_12712] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:13:02 2012-10-15 01:58:58
28 3576236 OASIS:DirectedActivity extra binding connectors in XMI OASIS:DirectedActivity extra binding connectors in XMI - not on parametric diagram: OASIS::Templates::PersonInOrganization::PersonInOrganization::personInOrganization - SysMLfromEXPRESS::Ap239Ap233Psm::OrganizationOrPersonInOrganizationAssignment::assignedEntity [_17_0_4_28b0143_1349363534252_295942_11927] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:16:40 2012-10-15 01:59:20
29 3576237 OASIS:Identification extra binding connectors in XMI OASIS:Identification extra binding connectors in XMI - not on parametric diagram: SysMLfromEXPRESS::Ap239Ap233Psm::EffectivityAssignment::assignedTo - [_17_0_4_2b2015d_1339147022778_500446_12492] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:16:59 2012-10-15 02:00:11
30 3576238 OASIS:IndividualCode extra binding connectors in XMI OASIS:IndividualCode extra binding connectors in XMI - not on parametric diagram: - OASIS::Templates::Classifier::Classifier::class [_17_0_4_28b0143_1341930046351_430554_17029] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:17:14 2012-10-15 02:00:32
31 3576239 OASIS:Message extra binding connectors in XMI OASIS:Message extra binding connectors in XMI - not on parametric diagram: - SysMLfromEXPRESS::Ap239Ap233Psm::AssignmentObject::classifiedAs [_17_0_4_27f011e_1339495862102_323963_11342] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:17:29 2012-10-15 02:01:00
32 3576240 OASIS:PlannedActivity extra binding connectors in XMI OASIS:PlannedActivity extra binding connectors in XMI - not on parametric diagram: OASIS::Templates::PersonInOrganization::PersonInOrganization::personInOrganization - SysMLfromEXPRESS::Ap239Ap233Psm::OrganizationOrPersonInOrganizationAssignment::assignedEntity [_17_0_4_28b0143_1349186236388_52076_13078] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:18:02 2012-10-15 02:01:36
33 3576241 OASIS:PropertyValueNumeric extra binding connectors in XMI OASIS:PropertyValueNumeric extra binding connectors in XMI - not on parametric diagram: OASIS::Templates::ProxyItem::ProxyItem::proxy - SysMLfromEXPRESS::Ap239Ap233Psm::ExternalUnit::sameAs [_17_0_5_63e0216_1339669891349_232555_11296] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:18:18 2012-10-15 02:01:46
34 3576242 OASIS:Requirement extra binding connectors in XMI OASIS:Requirement extra binding connectors in XMI - not on parametric diagram: OASIS::Templates::PropertyValueNumeric::PropertyValueNumeric::value - [_17_0_4_28b0143_1339591661709_326496_12980] SysMLfromEXPRESS::Ap239Ap233Psm::RequirementViewDefinition::viewDefinitionOf - [_17_0_4_28b0143_1339571156651_841889_11614] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:18:48 2012-10-15 02:02:00
35 3576243 OASIS:Task extra binding connectors in XMI - not on parametr OASIS:Task extra binding connectors in XMI - not on parametric diagram: SysMLfromEXPRESS::Ap239Ap233Psm::TaskMethod::versions - [_17_0_4_27f011e_1339670556554_592441_12045] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:19:15 2012-10-15 02:02:14
36 3576244 OASIS:WorkOrder extra binding connectors in XMI OASIS:WorkOrder extra binding connectors in XMI - not on parametric diagram: SysMLfromEXPRESS::Ap239Ap233Psm::AssignmentObject::classifiedAs - OASIS::Templates::Classifier::Classifier::classification [_17_0_5_63e0216_1339685444312_316669_12292] SysMLfromEXPRESS::Ap239Ap233Psm::AssignmentObject::classifiedAs - OASIS::Templates::Classifier::Classifier::classification [_17_0_5_63e0216_1339685693874_449437_13043] SysMLfromEXPRESS::Ap239Ap233Psm::AssignmentObject::classifiedAs - OASIS::Templates::Classifier::Classifier::classification [_17_0_5_63e0216_1339685789034_386465_13178] SysMLfromEXPRESS::Ap239Ap233Psm::DirectedActivity::directive - [_17_0_1_2b2015d_1305639283027_973055_15613] SysMLfromEXPRESS::Ap239Ap233Psm::OrganizationOrPersonInOrganizationAssignment::assignedEntity - OASIS::Templates::Organization::Organization::org [_17_0_1_2b2015d_1305639511442_235989_15716] 5 Pending Accepted robbod robbod robbod 2012-10-11 06:19:39 2012-10-15 02:02:51
37 3576584 OASIS:Identification Incorrect ref data Identifier_type See: http://sourceforge.net/support/tracker.php?aid=3572716 The class Identifier_type and Identification_code are redundant and have been removed from the reference data. The OWL constraint should be: http://docs.oasis-open.org/plcs/ns/plcslib/v1.0/data/plcs/plcs-psm/refdata/plcs-psm#Identifier 5 Pending Accepted robbod robbod robbod 2012-10-12 05:35:53 2012-10-15 02:03:21
38 3576710 OASIS: Order - create (rename to ResourceOrder) Need a template to represent a customer order of supply. It will be represented as a PSM WorkRequest. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-12 01:15:56 2012-10-30 03:09:52
39 3576712 OASIS: OrderAcknowledgment - create (rename to ROA) Need a template to represent a supplier acknowledgment of an order of supply. Will be represented using PSM WorkOrder and DirectedActivity. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-12 01:18:33 2012-10-30 04:23:55
40 3576714 OASIS: OrderDelivery - create (rename to ROD) Need a template to represent the delivery of an order of supply Will be represented as a PSM ActivityActual. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-12 01:20:48 2012-10-30 04:43:02
41 3576720 OASIS: OrderDeliveryReceipt - create (rename to RODR) Need a template to represent the actual reception of a delivery 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-12 01:53:53 2012-10-30 04:49:10
42 3576730 OASIS: OrderLineItem - create (rename to ROLI) Need a template to represent an order line item. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-12 02:38:45 2012-10-30 05:11:01
43 3577331 OASIS:Descriptor - add constraint combineDescriptions Add the constraint block: combineDescriptions That way there are to blocks. One for combining a set of Descriptor templates - combineDescriptors One for combining a set of Descriptor PSM Blocks- combineDescriptions 5 Pending Accepted robbod nobody robbod 2012-10-15 02:55:08 2012-10-29 07:10:21
44 3577356 OASIS: SystemBreakdown - add names property Add names property 5 Pending Accepted robbod nobody robbod 2012-10-15 03:53:36 2012-10-16 06:55:23
45 3577560 OASIS: Breakdown - add names property Add names property 5 Pending Accepted robbod nobody robbod 2012-10-16 06:49:44 2012-10-16 06:53:22
46 3577561 OASIS: BreakdownElement - add names property Add names property 5 Pending Accepted robbod nobody robbod 2012-10-16 06:50:29 2012-10-16 06:53:46
47 3577852 OASIS: Work Request - status property should be optional The property status is mandatory. The nature of a Work Request means that it may be the result of an early stage or incomplete process for which it is not possible to provide any values for status. Thus this property should be optional. There is also a text error in the definition of the status property. 5 Pending Accepted robhwd robbod robbod 2012-10-17 03:33:09 2012-10-22 08:27:39
48 3578087 OASIS: ResourceOrder - add property "contract" Add a property to refer to a contract 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-18 12:46:59 2012-10-30 03:10:26
49 3578113 OASIS:WorkRequest - correcte ref data Requestor_of = PersOrgAsg_actual_requestor Work_request_issue_date = Date_actual_release 5 Pending Accepted robbod robbod robbod 2012-10-18 02:36:16 2012-10-22 08:26:59
50 3578280 OASIS:Envelope - correct ref data Receiver_of = PersOrgAsg_as_actual_receiver Sender_of = PersOrgAsg_as_actual_sender Date_message_sent = Date_actual_sent 5 Pending Accepted robbod robbod robbod 2012-10-19 06:04:33 2012-10-22 08:26:40
51 3579647 OASIS:StatePrediction - create template Create a template for StatePrediction 5 Pending Accepted robbod nobody robbod 2012-10-24 05:42:56 2012-10-29 03:10:11
52 3579704 OASIS:Class - delete template The OASIS Class template effectively does nothing It is simply the select. It should be deleted 5 Pending Accepted robbod nobody robbod 2012-10-24 10:26:50 2012-10-29 03:16:17
53 3579705 OASIS:Individual- delete template The OASIS Individual template effectively does nothing It is simply the select. It should be deleted 5 Pending Accepted robbod robbod robbod 2012-10-24 10:27:56 2012-10-29 03:15:07
54 3581821 OASIS: Catalog - add \"names\" property Add a property "names" to the template 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 09:17:25 2012-10-31 08:09:02
55 3581823 OASIS: CatalogItem - change binding of "names" property Change the binding of the "names" property so that it binds to the BreakdownElement template "names" property. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 09:21:14 2012-10-31 08:08:39
56 3581853 OASIS: WorkRequest - add a "name" property optional name property missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 11:03:35 2012-10-31 08:26:30
57 3581854 OASIS: WorkOrder - add "name" property optional name property missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 11:04:43 2012-10-31 08:35:35
58 3581855 OASIS: DirectedActivity - add "names" property optional names property missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 11:05:34 2012-10-31 09:11:51
59 3581856 OASIS: WorkDone - add "names" property optional names property missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 11:06:23 2012-10-31 08:54:46
60 3581857 OASIS: PlannedActivity - add "names" property optional names property missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 11:07:39 2012-10-31 09:04:05
61 3581858 OASIS: ActualActivity - add "names" property optional names property missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 11:08:12 2012-10-31 09:29:26
62 3581859 OASIS: ActualProductUsage - add "names" property optional names property missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-30 11:08:57 2012-10-31 09:19:34
63 3581927 OASIS:Organization - remove reference to Name class Theproperty contextlessIdRole has an OWL class constraint An optional reference to the class used to define the role of the context free identifier (Organization.contextlessId) of the organization. For example CAGE code. The reference data used in Block: Ap239Ap233Psm:ClassSelect is restricted as follows: RDL constraint 1: The reference data for: ClassifiedByOwlClass.class is restricted to one of the following classes or a subclass of one of them: http://docs.oasis-open.org/plcs/ns/plcslib/v1.0/data/contexts/OASIS/refdata/plcs-rdl#Organization_identification_code http://docs.oasis-open.org/plcs/ns/plcslib/v1.0/data/contexts/OASIS/refdata/plcs-rdl#Organization_name The Organization_name class is not an identifier class 5 Pending Accepted robbod nobody robbod 2012-10-30 02:36:15 2012-11-12 07:36:47
64 3582172 OASIS: EnvironmentDefinition - create - Need a template for representing a type o environment. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-31 09:44:18 2012-10-31 01:35:43
65 3582175 OASIS: EnvironmentObserved - create - Need a template to represent the observation of environmental conditions 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-31 09:46:03 2012-11-13 12:33:49
66 3582176 OASIS: Fleet - create Need a template to represent a fleet of products 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-31 09:46:38 2012-10-31 06:06:05
67 3582177 OASIS: ActualMission - create Need a template to represent a mission activity 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-31 09:47:32 2012-11-13 04:41:54
68 3582187 OASIS: Applicability - remove reference to module Individual The MD project is still using the module of the template Individual but it has been removed. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-31 10:27:44 2012-10-31 10:29:32
69 3582200 OASIS: FleetItem - create Need a template to represent an item in a Fleet 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-31 11:11:17 2012-11-13 09:27:38
70 3582264 OASIS: Collection - add "names" Add "names" property to template Collection 5 Pending Accepted phoubaux phoubaux phoubaux 2012-10-31 04:39:38 2012-10-31 04:55:50
71 3584953 OASIS: ActualMissionItem - Create Need a template to represent an item in a mission to track when the item was in the mission and when it was not. Will be using ActivityAssignment with effectivity. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-07 03:22:42 2012-11-13 04:41:41
72 3585041 OASIS:ActualActivity - make planned activity optional The planned activity should be optional 5 Pending Accepted robbod nobody robbod 2012-11-07 08:16:22 2012-11-12 04:04:28
73 3585352 OASIS: PartAssembly - create Need a template to represent: parent/child relationship (represented as a NextAssemblyUsage classified as "PartAssembly") of PartViewDefinition(s), with effectivity, quantity, locationIndicator properties 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-08 08:54:36 2012-11-10 10:39:53
74 3585779 OASIS:SystemElement - incorrect part property Property sysBreakdown : SystemBreakdown is a Part property It should be a Reference property 5 Pending Accepted robbod nobody robbod 2012-11-09 03:52:01 2012-11-12 07:39:36
75 3586002 OASIS: MeasuredProperty - create Add a template representing a read property value. It should have the following characteristics: - name (read property name) - value (read property value) - unit (read property value unit) - dateRecorded : the date when the property value is read - recordedByEquipment: the equipment that performed the reading - recordedByPersOrg: the entity that read the value - typeOfValue: a class indicating if the property is an increment or an absolut value 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-10 10:46:00 2012-11-13 01:31:57
76 3586356 OASIS: ResourcePool - create Business case: Stock Management Need a template to represent a resource pool/stock. This will be represented as a collection of ManagedResource with following characteristics: - Location - ResponsibleOrganization - Validity start/end date for the pool 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-12 02:38:40 2012-11-13 03:23:24
77 3586357 OASIS: ResourcePoolItem - create A template to represent an item in a ResourcePool (ManagedResource with effectivity on the assignment to the pool): Characteristics: - The ResourcePool - The ManagedResource - start/end effectivity dates 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-12 02:40:48 2012-11-13 03:25:03
78 3587780 OASIS: Part - add "names" property The template Part is missing a "names" property. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-16 06:34:15 2012-11-16 07:00:10
79 3587886 OASIS: BreakdownElementRealization - add "classifications" Missing property "classifications" to be able to assign different type of codes for instance. 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-16 12:29:14 2012-11-16 12:43:32
80 3587887 OASIS: CatalogItemRealization - add "classifications" Missing "classifications" properties 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-16 12:30:37 2012-11-16 12:51:34
81 3588134 OASIS: RealizedPart - add "names" property Template RealizedPart is missing names property 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-17 08:49:57 2012-11-17 09:05:29
82 3589059 OASIS: ResourceOrder - turn properties to optiona; The following property of ResourceOrder should be optional: - customer - status - orderType to have the possible to refer to a ResourceOrder just by its identification 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-22 06:38:23 2012-11-22 09:50:02
83 3589063 OASIS: WorkRequest - requestor should be optional The following property of WorkRequest should be optional: - requestor to have the possible to refer to a WorkRequest just by its identification 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-22 06:39:23 2012-11-22 09:20:36
84 3589064 OASIS: ResourceOrderLineItem - properties should be optional The following property of ResourceOrderLineItem should be optional: - order - quantity to have the possible to refer to a ResourceOrderLineItem just by its identification 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-22 06:42:41 2012-11-22 10:07:29
85 3589065 OASIS: ResourceOrderLineItem - add classifs and descrs Add following properties to ResourceOrderLineItem: - classifications - descriptions 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-22 06:43:50 2012-11-22 10:08:15
86 3589294 OASIS: Task - add properties descriptions, classifications Template Task is missing properties: - descriptions [0..*] - classifications [0..*] 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-23 04:37:03 2012-11-23 04:59:35
87 3589333 OASIS: EnvironmentDefinition - Use proxy instead of id An environmentDefinition should be defined in an onthology, therefore the pattern should be the same as for ExternalPropertyDefinition or StateDefinition, meaning identifying the psm with a proxy and not with an identifier. Remove "id", versionId properties Add a proxy property 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-23 07:31:23 2012-11-23 12:40:21
88 3589530 OASIS: Observation - add "names" property Property "names" is missing 5 Pending Accepted phoubaux phoubaux phoubaux 2012-11-24 05:10:00 2012-11-24 06:16:16
89 3590623 Fix ref data URI The following templates refers to ref data uri which are not in the owl file - ActualMission - Catalog - CatalogItem - CatalogItemStructure - EventReport - FleetItem - PartAssembly - RealizedPartAssembly - ResourcePool - ResourcePoolItem 5 Pending Remind phoubaux phoubaux phoubaux 2012-11-28 06:35:07 2012-11-28 07:46:59
90 3590644 startEffectivityDate should be [0..1] The following templates are using DatedEffectivity template. The property startEffectivityDate should be optional: - ActualMissionItem - PartAssembly - RealizedPartAssembly - ResourcePoolItem 5 Pending Remind phoubaux phoubaux phoubaux 2012-11-28 09:18:21 2012-11-28 10:11:15