[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [virtio-dev] Re: [virtio-comment] [PATCH] virtio-net: support per-queue coalescing moderation
å 2023/2/7 äå10:06, Michael S. Tsirkin åé:
On Tue, Feb 07, 2023 at 07:16:34PM +0800, Heng Qi wrote:Currently, the coalescing profile is directly applied to all queues. This patch supports configuring the parameters for a specified queue. When the traffic between queues is unbalanced, for example, one queue is busy and another queue is idle, then it will be very useful to control coalescing parameters at the queue granularity.ethtool does not support this though, does it? what's the plan?
Yes, ethtool does not support this function yet, and this function will not conflict with ethool.
Our current goal is to let virtio-net support netdim first.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>What I dislike about this interface is that if VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated, then in the common case of same parameters for all queues driver has to issue multiple commands. I can see either a special vq index (0xffff ?) or a special command used to set it for all queues.--- content.tex | 49 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 7 deletions(-) diff --git a/content.tex b/content.tex index e863709..049c0e4 100644 --- a/content.tex +++ b/content.tex @@ -3084,6 +3084,9 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control channel.+\item[VIRTIO_NET_F_PERQUEUE_NOTF_COAL(52)] Device supports per-queue+ notifications coalescing. + \item[VIRTIO_NET_F_NOTF_COAL(53)] Device supports notifications coalescing.\item[VIRTIO_NET_F_GUEST_USO4 (54)] Driver can receive USOv4 packets.@@ -3140,6 +3143,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device \item[VIRTIO_NET_F_NOTF_COAL] Requires VIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_RSC_EXT] Requires VIRTIO_NET_F_HOST_TSO4 or VIRTIO_NET_F_HOST_TSO6. \item[VIRTIO_NET_F_RSS] Requires VIRTIO_NET_F_CTRL_VQ. +\item[VIRTIO_NET_F_PERQUEUE_NOTF_COAL] Requires VIRTIO_NET_F_CTRL_VQ and VIRTIO_NET_F_NOTF_COAL. \end{description}\subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types / Network Device / Feature bits / Legacy Interface: Feature bits}@@ -4488,16 +4492,21 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / DeviIf the VIRTIO_NET_F_NOTF_COAL feature is negotiated, the driver cansend control commands for dynamically changing the coalescing parameters. +If additionally VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated, the driver +can send control commands to configure the coalescing parameters of a +specified receiveq or transmitq.\begin{lstlisting}struct virtio_net_ctrl_coal_rx { le32 rx_max_packets; le32 rx_usecs; + le16 rx_qid; (Only if VIRTIO_NET_F_PERQUEUE_NOTF_COAL negotiated) };struct virtio_net_ctrl_coal_tx {le32 tx_max_packets; le32 tx_usecs; + le16 tx_qid; (Only if VIRTIO_NET_F_PERQUEUE_NOTF_COAL negotiated) };#define VIRTIO_NET_CTRL_NOTF_COAL 6I think it's a good idea to do this on top of Alvaro's patch unifying these two structures.
I saw Alvaro's patch, but it doesn't seem to be stable yet, is there a good way for me to
unify the two structures, since a patch should only do one thing.
@@ -4507,17 +4516,34 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / DeviCoalescing parameters:\begin{itemize} -\item \field{rx_usecs}: Maximum number of usecs to delay a RX notification. -\item \field{tx_usecs}: Maximum number of usecs to delay a TX notification. +\item \field{rx_qid}: Index of which receiveq to change the coalescing parameters. + If the value is between 0 and 0x7FFF, it represents the index of the specified + receiveq. Otherwise, if the value is 0xFFFF, it indicates to change the + coalescing parameters for all receiveqs.what if the index does not map to a receive queue?
The spec mentioned"A device SHOULD respond to the VIRTIO_NET_CTRL_NOTF_COAL commands with VIRTIO_NET_ERR if it was not able to change the parameters.",
I think this belongs to this situation. Thanks.
+\item \field{tx_qid}: Index of which transmitq to change the coalescing parameters. + If the value is between 0 and 0x7FFF, it represents the index of the specified + transmitq. Otherwise, if the value is 0xFFFF, it indicates to change the + coalescing parameters for all transmitqs. +\item \field{rx_usecs}: Maximum number of usecs to delay a RX notification. If additionally + VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated, it works for the specified recieveq + or all receieveqs. +\item \field{tx_usecs}: Maximum number of usecs to delay a TX notification. If additionally + VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated, it works for the specified transmitq + or all transmitqs. \item \field{rx_max_packets}: Maximum number of packets to receive before a RX notification. + If additionally VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated, it works for the + specified receiveq or all receiveqs. \item \field{tx_max_packets}: Maximum number of packets to send before a TX notification. + If additionally VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated, it works for the + specified transmitq or all transmitqs. \end{itemize}-The class VIRTIO_NET_CTRL_NOTF_COAL has 2 commands: \begin{enumerate} -\item VIRTIO_NET_CTRL_NOTF_COAL_TX_SET: set the \field{tx_usecs} and \field{tx_max_packets} parameters. -\item VIRTIO_NET_CTRL_NOTF_COAL_RX_SET: set the \field{rx_usecs} and \field{rx_max_packets} parameters. +\item VIRTIO_NET_CTRL_NOTF_COAL_TX_SET: set the \field{tx_usecs} and \field{tx_max_packets} parameters, + and set the \field{tx_qid} if VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated. +\item VIRTIO_NET_CTRL_NOTF_COAL_RX_SET: set the \field{rx_usecs} and \field{rx_max_packets} parameters, + and set the \field{rx_qid} if VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated. \end{enumerate}\subparagraph{RX Notifications}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Notifications Coalescing / RX Notifications}@@ -4531,7 +4557,11 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi The device will operate as follows:\begin{itemize}-\item The device will count received packets until it accumulates 15, or until 10 usecs elapsed since the first one was received. +\item The device will count received packets until it accumulates 15, or until + 10 usecs elapsed since the first one was received. If additionally + VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated: when \field{rx_qid} is set + to 0, the accumulation was only from the receiveq1; when \field{rx_qid} is + set to 0xFFFF, the accumulation was from all receiveqs. \item If the notifications are not suppressed by the driver, the device will send an used buffer notification, otherwise, the device will not send an used buffer notification as long as the notifications are suppressed. \end{itemize}@@ -4546,7 +4576,12 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / DeviThe device will operate as follows:\begin{itemize}-\item The device will count sent packets until it accumulates 15, or until 10 usecs elapsed since the first one was sent. +\item The device will count sent packets on the transmitq1 until it accumulates 15, + or until 10 usecs elapsed since the first one was sent. If additionally + VIRTIO_NET_F_PERQUEUE_NOTF_COAL is negotiated: when \field{tx_qid} is set + to 0, the accumulation was only from the transmitq1; when \field{tx_qid} is + set to 0xFFFF, the accumulation was from all transmitqs. + \item If the notifications are not suppressed by the driver, the device will send an used buffer notification, otherwise, the device will not send an used buffer notification as long as the notifications are suppressed. \end{itemize}--2.19.1.6.gb485710b This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC. In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting. Subscribe: virtio-comment-subscribe@lists.oasis-open.org Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org List help: virtio-comment-help@lists.oasis-open.org List archive: https://lists.oasis-open.org/archives/virtio-comment/ Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists Committee: https://www.oasis-open.org/committees/virtio/ Join OASIS: https://www.oasis-open.org/join/--------------------------------------------------------------------- To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]