[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [PATCH v4 4/8] transport-mmio: Refer to the vq by its number
Currently specification uses virtqueue index and number interchangeably to refer to the virtqueue. Instead refer to it by its number. Fixes: https://github.com/oasis-tcs/virtio-spec/issues/163 Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> --- transport-mmio.tex | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/transport-mmio.tex b/transport-mmio.tex index 3047633..f9b3a34 100644 --- a/transport-mmio.tex +++ b/transport-mmio.tex @@ -108,7 +108,7 @@ \subsection{MMIO Device Register Layout}\label{sec:Virtio Transport Options / Vi bits accessible by writing to \field{DriverFeatures}. } \hline - \mmioreg{QueueSel}{Virtual queue index}{0x030}{W}{% + \mmioreg{QueueSel}{Virtual queue number}{0x030}{W}{% Writing to this register selects the virtual queue that the following operations on \field{QueueSizeMax}, \field{QueueSize}, \field{QueueReady}, @@ -149,7 +149,7 @@ \subsection{MMIO Device Register Layout}\label{sec:Virtio Transport Options / Vi there are new buffers to process in a queue. When VIRTIO_F_NOTIFICATION_DATA has not been negotiated, - the value written is the queue index. + the value written is the queue number. When VIRTIO_F_NOTIFICATION_DATA has been negotiated, the \field{Notification data} value has the following format: @@ -363,8 +363,7 @@ \subsubsection{Virtqueue Configuration}\label{sec:Virtio Transport Options / Vir The driver will typically initialize the virtual queue in the following way: \begin{enumerate} -\item Select the queue writing its index (first queue is 0) to - \field{QueueSel}. +\item Select the queue writing its number to \field{QueueSel}. \item Check if the queue is not already in use: read \field{QueueReady}, and expect a returned value of zero (0x0). @@ -392,7 +391,7 @@ \subsubsection{Available Buffer Notifications}\label{sec:Virtio Transport Option When VIRTIO_F_NOTIFICATION_DATA has not been negotiated, the driver sends an available buffer notification to the device by writing -the 16-bit virtqueue index +the 16-bit virtqueue number of the queue to be notified to \field{QueueNotify}. When VIRTIO_F_NOTIFICATION_DATA has been negotiated, @@ -470,7 +469,7 @@ \subsection{Legacy interface}\label{sec:Virtio Transport Options / Virtio Over M (see QueuePFN). } \hline - \mmioreg{QueueSel}{Virtual queue index}{0x030}{W}{% + \mmioreg{QueueSel}{Virtual queue number}{0x030}{W}{% Writing to this register selects the virtual queue that the following operations on the \field{QueueSizeMax}, \field{QueueSize}, \field{QueueAlign} @@ -550,8 +549,7 @@ \subsection{Legacy interface}\label{sec:Virtio Transport Options / Virtio Over M The virtual queue is configured as follows: \begin{enumerate} -\item Select the queue writing its index (first queue is 0) to - \field{QueueSel}. +\item Select the queue writing its number to \field{QueueSel}. \item Check if the queue is not already in use: read \field{QueuePFN}, expecting a returned value of zero (0x0). -- 2.26.2
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]