OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-comment message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: [PATCH requirements 1/7] net-features: Add requirements document for release 1.4


Add requirements document template for the virtio net features.

Add virtio net device counters visible to driver.

Signed-off-by: Parav Pandit <parav@nvidia.com>
---
 net-workstream/features-1.4.md | 36 ++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 net-workstream/features-1.4.md

diff --git a/net-workstream/features-1.4.md b/net-workstream/features-1.4.md
new file mode 100644
index 0000000..03b4eb3
--- /dev/null
+++ b/net-workstream/features-1.4.md
@@ -0,0 +1,36 @@
+# 1. Introduction
+
+This document describes the overall requirements for virtio net device
+improvements for upcoming release 1.4. Some of these requirements are
+interrelated and influence the interface design, hence reviewing them
+together is desired while updating the virtio net interface.
+
+# 2. Summary
+1. Device counters visible to the driver
+
+# 3. Requirements
+## 3.1 Device counters
+1. The driver should be able to query the device and/or per vq counters for
+   debugging purpose using a control vq command.
+2. The driver should be able to query which counters are supported using a
+   control vq command.
+3. If this device is migrated between two hosts, the driver should be able
+   get the counter values in the destination host from where it was left
+   off in the source host.
+4. If a virtio device is group member device, a group owner should be able
+   to query all the counter attributes using the admin queue command which
+   a virtio device will expose via a control vq to the driver.
+
+### 3.1.1 Per receive queue counters
+1. le64 rx_oversize_pkt_errors: Packet dropped due to receive packet being
+    oversize than the buffer size
+2. le64 rx_no_buffer_pkt_errors: Packet dropped due to unavailability of the
+    buffer in the receive queue
+3. le64 rx_gro_pkts: Packets treated as guest GSO sequence by the device
+4. le64 rx_pkts: Total packets received by the device
+
+### 3.1.2 Per transmit queue counters
+1. le64 tx_bad_desc_errors: Descriptors dropped by the device due to errors in
+   descriptors
+2. le64 tx_gso_pkts: Packets send as host GSO sequence
+3. le64 tx_pkts: Total packets send by the device
-- 
2.26.2



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]