[PATCH requirements 1/7] net-features: Add requirements document for release 1.4

[Parav Pandit <parav@nvidia.com>]

Add requirements document template for the virtio net features.

Add virtio net device counters visible to driver.

Signed-off-by: Parav Pandit <parav@nvidia.com>
---
changelog:
v0->v1:
- removed tx dropped counter
- updated requirements to mention about virtqueue interface for counters
  query
---
 net-workstream/features-1.4.md | 35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 net-workstream/features-1.4.md

diff --git a/net-workstream/features-1.4.md b/net-workstream/features-1.4.md
new file mode 100644
index 0000000..4c3797b
--- /dev/null
+++ b/net-workstream/features-1.4.md
@@ -0,0 +1,35 @@
+# 1. Introduction
+
+This document describes the overall requirements for virtio net device
+improvements for upcoming release 1.4. Some of these requirements are
+interrelated and influence the interface design, hence reviewing them
+together is desired while updating the virtio net interface.
+
+# 2. Summary
+1. Device counters visible to the driver
+
+# 3. Requirements
+## 3.1 Device counters
+1. The driver should be able to query the device and/or per vq counters for
+   debugging purpose using a virtqueue directly from driver to device for
+   example using a control vq.
+2. The driver should be able to query which counters are supported using a
+   virtqueue command, for example using an existing control vq.
+3. If this device is migrated between two hosts, the driver should be able
+   get the counter values in the destination host from where it was left
+   off in the source host.
+4. If a virtio device is group member device, a group owner should be able
+   to query all the counter attributes using the administration command which
+   a virtio member device will expose via a virtqueue to the driver.
+
+### 3.1.1 Per receive queue counters
+1. le64 rx_oversize_pkt_errors: Packet dropped due to receive packet being
+    oversize than the buffer size
+2. le64 rx_no_buffer_pkt_errors: Packet dropped due to unavailability of the
+    buffer in the receive queue
+3. le64 rx_gro_pkts: Packets treated as receive GSO sequence by the device
+4. le64 rx_pkts: Total packets received by the device
+
+### 3.1.2 Per transmit queue counters
+1. le64 tx_gso_pkts: Packets send as transmit GSO sequence
+2. le64 tx_pkts: Total packets send by the device
-- 
2.26.2