[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [PATCH v2 1/2] virtio-net: Fix receive buffer size calculation text
Receive buffer size calculation is based on the following negotiated features. The text has wrong calculation for IPv6 and also it has missed VIRTIO_NET_F_HASH_REPORT. The problem of igorance of VIRTIO_NET_F_HASH_REPORT is reported in [1], however fix for ipv6 payload length must also be considered. Since for the both the fixes touching same requirements, a new issue is created as [2]. This patch brings following fixes. 1. Fix annotating struct virtio_net_hdr as field 2. Fix receive buffer calculation for guest GSO cases to consider ipv6 payload length 3. small grammar corrections for article 4. reword the requirement to consider the virtio_ndr_hdr which is depends on the negotiated feature, hence first clarify the struct virtio_net_hdr size [1] https://github.com/oasis-tcs/virtio-spec/issues/170 [2] https://github.com/oasis-tcs/virtio-spec/issues/183 Fixes: https://github.com/oasis-tcs/virtio-spec/issues/170 Fixes: https://github.com/oasis-tcs/virtio-spec/issues/183 Signed-off-by: Parav Pandit <parav@nvidia.com> --- changelog: v1->v2: - addressed comments from Cornelia - rephrase buffer size wording without explicit length of virtio_net_hdr at 3 places. - replaced otherwise to ', otherwise' - rephrase non normative to write as driver normative --- device-types/net/description.tex | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/device-types/net/description.tex b/device-types/net/description.tex index aff5e08..53a56ee 100644 --- a/device-types/net/description.tex +++ b/device-types/net/description.tex @@ -657,10 +657,13 @@ \subsubsection{Setting Up Receive Buffers}\label{sec:Device Types / Network Devi If the VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, VIRTIO_NET_F_GUEST_UFO, VIRTIO_NET_F_GUEST_USO4 or VIRTIO_NET_F_GUEST_USO6 features are used, the maximum incoming packet -will be to 65550 bytes long (the maximum size of a -TCP or UDP packet, plus the 14 byte ethernet header), otherwise -1514 bytes. The 12-byte struct virtio_net_hdr is prepended to this, -making for 65562 or 1526 bytes. +will be 65589 bytes long (14 bytes of Ethernet header, plus 40 bytes of +the IPv6 header, plus 65535 bytes of maximum IPv6 payload including any +extension header), otherwise 1514 bytes. +When VIRTIO_NET_F_HASH_REPORT is not negotiated, the required receive buffer +size is either 65601 or 1526 bytes. +When VIRTIO_NET_F_HASH_REPORT is negotiated, the required receive buffer +size is either 65609 or 1534 bytes. \drivernormative{\paragraph}{Setting Up Receive Buffers}{Device Types / Network Device / Device Operation / Setting Up Receive Buffers} @@ -669,18 +672,24 @@ \subsubsection{Setting Up Receive Buffers}\label{sec:Device Types / Network Devi \begin{itemize} \item If VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, VIRTIO_NET_F_GUEST_UFO, VIRTIO_NET_F_GUEST_USO4 or VIRTIO_NET_F_GUEST_USO6 are negotiated, the driver SHOULD populate - the receive queue(s) with buffers of at least 65562 bytes. + the receive queue(s) with buffers of at least 65609 bytes if + VIRTIO_NET_F_HASH_REPORT is negotiated, and of at least 65601 bytes if not. \item Otherwise, the driver SHOULD populate the receive queue(s) - with buffers of at least 1526 bytes. + with buffers of at least 1534 bytes if VIRTIO_NET_F_HASH_REPORT + is negotiated, and of at least 1526 bytes if not. \end{itemize} \item If VIRTIO_NET_F_MRG_RXBUF is negotiated, each buffer MUST be at -least the size of the struct virtio_net_hdr. +least size of \field{struct virtio_net_hdr}, +i.e. 20 bytes if VIRTIO_NET_F_HASH_REPORT is negotiated, and 12 bytes if not. \end{itemize} \begin{note} Obviously each buffer can be split across multiple descriptor elements. \end{note} +The driver MUST consider size of field \field{struct virtio_net_hdr} +20 bytes if VIRTIO_NET_F_HASH_REPORT is negotiated, and 12 bytes if not. + If VIRTIO_NET_F_MQ is negotiated, each of receiveq1\ldots receiveqN that will be used SHOULD be populated with receive buffers. -- 2.34.1
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]