OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-comment message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: [PATCH] virtio: introduce SUSPEND bit in device status


This commit allows the driver to suspend the device by
introducing a new status bit SUSPEND in device_status.

This commit also introduce a new feature bit VIRTIO_F_SUSPEND
which indicating whether the device support SUSPEND.

This SUSPEND bit is transport-independent.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio PÃrez <eperezma@redhat.com>
---
 content.tex | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/content.tex b/content.tex
index 0a62dce..3d656b5 100644
--- a/content.tex
+++ b/content.tex
@@ -49,6 +49,9 @@ \section{\field{Device Status} Field}\label{sec:Basic Facilities of a Virtio Dev
 
 \item[DEVICE_NEEDS_RESET (64)] Indicates that the device has experienced
   an error from which it can't recover.
+
+\item[SUSPEND (16)] When VIRTIO_F_SUSPEND is negotiated, indicates that the
+  device has been suspended by the driver.
 \end{description}
 
 The \field{device status} field starts out as 0, and is reinitialized to 0 by
@@ -73,6 +76,10 @@ \section{\field{Device Status} Field}\label{sec:Basic Facilities of a Virtio Dev
 recover by issuing a reset.
 \end{note}
 
+The driver SHOULD NOT set SUSPEND if FEATURES_OK is not set.
+
+When setting SUSPEND, the driver MUST re-read \field{device status} to ensure the SUSPEND bit is set.
+
 \devicenormative{\subsection}{Device Status Field}{Basic Facilities of a Virtio Device / Device Status Field}
 
 The device MUST NOT consume buffers or send any used buffer
@@ -82,6 +89,25 @@ \section{\field{Device Status} Field}\label{sec:Basic Facilities of a Virtio Dev
 that a reset is needed.  If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET, the device
 MUST send a device configuration change notification to the driver.
 
+The device MUST ignore SUSPEND if FEATURES_OK is not set.
+
+The device MUST ignore SUSPEND if VIRTIO_F_SUSPEND is not negotiated.
+
+The device SHOULD allow settings to \field{device status} even when SUSPEND is set.
+
+If VIRTIO_F_SUSPEND is negotiated and SUSPEND is set, the device SHOULD clear SUSPEND
+and resumes operation upon DRIVER_OK.
+
+If VIRTIO_F_SUSPEND is negotiated, when the driver sets SUSPEND,
+the device SHOULD perform the following actions before presenting SUSPEND bit in the \field{device status}:
+
+\begin{itemize}
+\item Stop consuming buffers of any virtqueues and mark all finished descriptors as used.
+\item Wait until all descriptors that being processed to finish and mark them as used.
+\item Flush all used buffer and send used buffer notifications to the driver.
+\item Pause its operation except \field{device status} and preserve configurations in its Device Configuration Space, see \ref{sec:Basic Facilities of a Virtio Device / Device Configuration Space}
+\end{itemize}
+
 \section{Feature Bits}\label{sec:Basic Facilities of a Virtio Device / Feature Bits}
 
 Each virtio device offers all the features it understands.  During
@@ -99,10 +125,10 @@ \section{Feature Bits}\label{sec:Basic Facilities of a Virtio Device / Feature B
 \begin{description}
 \item[0 to 23, and 50 to 127] Feature bits for the specific device type
 
-\item[24 to 41] Feature bits reserved for extensions to the queue and
+\item[24 to 42] Feature bits reserved for extensions to the queue and
   feature negotiation mechanisms
 
-\item[42 to 49, and 128 and above] Feature bits reserved for future extensions.
+\item[43 to 49, and 128 and above] Feature bits reserved for future extensions.
 \end{description}
 
 \begin{note}
@@ -872,6 +898,10 @@ \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
 	\ref{devicenormative:Basic Facilities of a Virtio Device / Feature Bits} for
 	handling features reserved for future use.
 
+  \item[VIRTIO_F_SUSPEND(42)] This feature indicates that the driver can
+   SUSPEND the device.
+   See \ref{sec:Basic Facilities of a Virtio Device / Device Status Field}.
+
 \end{description}
 
 \drivernormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
-- 
2.35.3



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]