[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: RE: [wsbpel] Abstract BPEL (was RE: [wsbpel] FAQ)
Steve, You ask some very good questions. Perhaps this is best explored further in the use cases group that John and others are driving where we could work through examples of what collaborative use cases need to look like. Satish -----Original Message----- From: Steve Capell [mailto:steve.capell@redwahoo.com] Sent: Thursday, October 23, 2003 12:16 AM To: Satish Thatte; 'Furniss, Peter'; ygoland@bea.com; John Evdemon; wsbpel@lists.oasis-open.org; Dave Welsh Subject: RE: [wsbpel] Abstract BPEL (was RE: [wsbpel] FAQ) Thank you Satish, I have just joined this group (as an observer) so have not seen where "abstract" bpel strategy is going. I can see that BPEL4WS does not handle abstract collaborations today but I admit that I had thought that "abstract" ws-bpel was going to address the same space as ebXML BPSS - namely a single schema that describes the roles of all parties (typically just two parties) in a collaboration. Do I understand from your response that "abstract" ws-bpel will not be doing that? If not then I am having some conceptual difficulty understanding how I might "generate" the process schema from a bcf model - which is definitely a multi-party collaborative model. Maybe (as you suggest), the generation produces multiple ws-bpel schema and a "governing" ws-policy schema. Seems a bit messy and "hard" compared to ebXML BPSS? Wouldn't it be simpler (for users of the spec) to provide bpel support for abstract multi-party collaborations than to define set of standard ws-policy assertions to deliver that "manifest" of separate bits & pieces? Sorry if I am talking rubbish - just trying to get my head around how I can deliver an Australian national B2B interoperability framework using WS instead of ebXML.... Regards, Steve Capell RedWahoo Sydney, Australia Tel : +61 410 437854 This email message and any accompanying attachments may contain information that is confidential and is subject to legal privilege. If you are not the intended recipient, do not read, use, disseminate, distribute or copy this message or attachments. If you have received this message in error, please notify the sender immediately, and delete this message. Any views expressed in this message are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of Red Wahoo Pty. Ltd. Before opening any attachments, please check them for viruses and defects. We do not accept any liability for loss or damage which may arise from your receipt of this e-mail. -----Original Message----- From: Satish Thatte [mailto:satisht@microsoft.com] Sent: Thursday, 23 October 2003 4:40 PM To: Steve Capell; Furniss, Peter; ygoland@bea.com; John Evdemon; wsbpel@lists.oasis-open.org; Dave Welsh Subject: RE: [wsbpel] Abstract BPEL (was RE: [wsbpel] FAQ) Steve, I completely agree with the way you described a potential formalization of a PIP. Do note that you will need as many abstract processes as there are participants and you will also need to ensure that their relationships are expressed through some sort of "global model". Abstract processes are in my opinion necessary but not sufficient for defining business protocols. In addition to the artifacts you listed a global manifest/model that expresses all the relationships is required since partnerLinks will have independent QNames in each process' private namespace. One could imagine using WS-Policy for expressing this. Satish -----Original Message----- From: Steve Capell [mailto:steve.capell@redwahoo.com] Sent: Wednesday, October 22, 2003 11:15 PM To: Satish Thatte; 'Furniss, Peter'; ygoland@bea.com; John Evdemon; wsbpel@lists.oasis-open.org; Dave Welsh Subject: RE: [wsbpel] Abstract BPEL (was RE: [wsbpel] FAQ) Satish Are we confusing a "Business Domain" (eg supply chain) with a business process (eg "purchasing")? In business process modelling (such as the UN/CEFACT BCF methodology) the collaborative "business process" is typically quite granular (eg an order and order response). The process is a small part of a business domain such as supply chain. To describe the entire domain with an abstract bpel is a huge challenge but to describe a fairly granual collaboration strikes me as quite do-able and quite useful. >From my perspective, I would like to be able to completely define a "public process" using machine readable WS schema in a similar way to ebXML specifications. For example, to describe a simple order / order response process such as resettaNet PIP3A4 using WS schema I would need: 1 An abstract ws-bpel defining the simple collaboration 2 A ws-policy assertion schema definin the QOS attributes of each activity (non-repudiation, time to acknowledge, etc) 3 Two XSD schema (one for each message) representing the order and orderResponse messages defined by the model. 4 Two wsdls (one for each party) with references to the xsd schema (import), ws-policy (policyRef extension), and ws-bpel role (partnerLinkType extension). This complete machine readable "public process" can then be used to configure testing tools (for certification or compliant application, design time tools (for creating "private process" orchestrations, and runtime tools (for managing compliance to public process QOS requirements). On behalf of the Australian government I am certainly hoping that ws-bpel will provide the capability to describe at least simple collabroative processes - otherwise we will have to fall back on things like ebXML BPSS - but then we'd lose the potential to glue together the "public collabroation" and "private orchestration" in one set of specifications & tools. Regards, Steve Capell RedWahoo Sydney, Australia Tel : +61 410 437854 This email message and any accompanying attachments may contain information that is confidential and is subject to legal privilege. If you are not the intended recipient, do not read, use, disseminate, distribute or copy this message or attachments. If you have received this message in error, please notify the sender immediately, and delete this message. Any views expressed in this message are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of Red Wahoo Pty. Ltd. Before opening any attachments, please check them for viruses and defects. We do not accept any liability for loss or damage which may arise from your receipt of this e-mail. -----Original Message----- From: Satish Thatte [mailto:satisht@microsoft.com] Sent: Thursday, 23 October 2003 11:36 AM To: Furniss, Peter; ygoland@bea.com; John Evdemon; wsbpel@lists.oasis-open.org Subject: RE: [wsbpel] Abstract BPEL (was RE: [wsbpel] FAQ) As I argued during my presentation at the first F2F, the idea that a neutral description of multi-party interaction is essential for business protocol definition is erroneous, and worse, too restrictive. In particular protocols using full duplex communication are almost impossible to describe without separately describing the external behavior of each party, because the number of states corresponding to races becomes unmanageable and incomprehensible. Think of a supply chain protocol where an order may be canceled at arbitrary points. Most neutral protocol descriptions tend to be reduced to finite state machines that are also very poor at describing data dependent aspects, error recovery protocols, etc. I expect this is what Peter is referring to when he speaks of "heading towards somehting much like on abstract bpel". I therefore consider Yaron's objection to be groundless and advocate keeping the paragraph as is. -----Original Message----- From: Furniss, Peter [mailto:Peter.Furniss@choreology.com] Sent: Wednesday, October 22, 2003 4:42 PM To: ygoland@bea.com; John Evdemon; wsbpel@lists.oasis-open.org Subject: [wsbpel] Abstract BPEL (was RE: [wsbpel] FAQ) Some of Yaron's comments on the FAQ (most of which I agree with) seem to relate to the power of abstract BPEL paragraph from the proposed FAQ: <quote> The Business Process Execution Language is a XML-based language for formally describing interoperable business processes and business interaction protocols. It defines how web services are connected together and in what sequence in order to accomplish a particular task </quote> to which Yaron comments : <quote> BPEL only provides a description of the behavior of a single player in a business process protocol. Since protocols require, by definition, more than one player BPEL is by definition unable to completely describe a business process protocol or to specify how different processes interact beyond describing the behavior of a single participant. Therefore I think this paragraph should be struck. </quote> which was very much my view until I had a conversation with Tony Andrews and got a better understanding of his presentation from the first face-to-face ( http://www.oasis-open.org/archives/wsbpel/200305/msg00172.html). It seemed some things I had thought would be necessary, and which I hadn't seen stated, and so assumed were not in view, were definitely intended/expected: - there can be multiple abstract definitions for a single executable, each specifying the dynamic behaviour of one (or set of related) interfaces, with the other interfaces handled by opaque assignment; the choice of how many of these there are, their level of opacity and the interfaces covered is a design/viewpoint question - there can be (and need to be for the "global" picture) abstract bpel definitions for processes that are never going to be in bpel - not least because some are "leaf" processes in the web-service world, and do real work on databases or visible effect on GUIs etc. rather than just defer to yet another web-service, which is all executable bpel can do - there can be multiple executable processes matching a single abstract definition - this is just an interface:implementation relationship (Apologies to Tony if I've mis-represented him). They obviously have some exciting implications for what bpel tools in general might do (especially the middle one - how on earth do you show compatibility between abstract bpel and a legacy app written in cobol with a web-service front end) But these don't seem to be in the spec. (last one might be). Should it be left to interpretation (and, no doubt, some books) ? There's also the possibility of stating the rules (guidelines ? constraints ?) involved in the two abstract bpel definitions that make up either side of a business protocol. (I should possibly mention that I was for a long time very sceptical about whether bpel or things like it was the way to do this, and thought it could be done with a simpler, less procedural approach. but gradually I found my vague "ideal" was getting necessarily more complex and needing more functionality - in fact heading towards somehting much like on abstract bpel) Peter (speaking for himself) > -----Original Message----- > From: Yaron Goland [mailto:ygoland@bea.com] > Sent: 22 October 2003 23:09 > To: 'John Evdemon'; wsbpel@lists.oasis-open.org > Subject: RE: [wsbpel] FAQ > > > Some comments > > > -----Original Message----- > > From: John Evdemon [mailto:jevdemon@microsoft.com] > > Sent: Tuesday, October 21, 2003 12:44 PM > > To: wsbpel@lists.oasis-open.org > > Subject: [wsbpel] FAQ > > > > > > <<WSBPEL DRAFT FAQ.txt>> Hello all, > > > > A while ago I asked for feedback on a TC FAQ. I have attached a > > draft that incorporates some initial feedback from Monica and Ugo. > > Please respond with any additional questions or concerns. > > > > If there is no feedback by 10/28 I will assume the TC is happy with > > the current version (attached) and submit it to OASIS. > > > > Thanks! > > > > John > > > > > To unsubscribe from this mailing list (and be removed from the roster of the OASIS TC), go to http://www.oasis-open.org/apps/org/workgroup/wsbpel/members/leave_workgr oup.php. To unsubscribe from this mailing list (and be removed from the roster of the OASIS TC), go to http://www.oasis-open.org/apps/org/workgroup/wsbpel/members/leave_workgr oup.php. To unsubscribe from this mailing list (and be removed from the roster of the OASIS TC), go to http://www.oasis-open.org/apps/org/workgroup/wsbpel/members/leave_workgr oup.php.
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]