[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: RE: re[4]: [cgmo-webcgm] review of aci files
Don, The binary CGMs that you've submitted are invalid. I've attached a ZIP file containing the MetaCheck trace output for each. Lofton, Please reset the status of these tests to reworking. aciDefaultFont aciEdgeAttr aciFontNormalization aciGenericFonts aciHatchStyleDef aciLineAttr aciLineEdgeTypeDef aciMapListOrder aciMitreLimit aciRestrictedTextType aciSimpleFontSubsitution The CGM conformance violation is the same in each; namely, the VDC Extent exceeds the specified Maximum VDC Extent. Each CGM has (1,1) (-1,-1) for the Maximum VDC Extent and that is well exceeded by the VDC Extent in each case. These CGMs also highlight an inconsistency in the WebCGM profile. T.16.8 allows for 16-bit color index precision. However, T.16.9 caps the maximum color index at 255, i.e. effectively limiting you to only 8-bit color index precision. We should make these two table rows in the PPF consistent with each other. More later, Rob -----Original Message----- From: 'Don Larson (E-mail)' [mailto:dlarson@cgmlarson.com] Sent: Thursday, March 19, 2009 7:37 AM To: Lofton Henderson Cc: 'CGM Open WebCGM TC' Subject: re[4]: [cgmo-webcgm] review of aci files Lofton, I have corrected and updated the following ACI files: aciFontNormalization.aci aciLineAttr.aci aciHatchStyleDef.aci aciMitreLimit.aci Also all the ACI related CGMs have been converted to binary: aciDefaultFont.cgm aciEdgeAttr.cgm aciFontNormalization.cgm aciGenericFonts.cgm aciHatchStyleDef.cgm aciLineAttr.cgm aciLineEdgeTypeDef.cgm aciMapListOrder.cgm aciMitreLimit.cgm aciRestrictedTextType.cgm aciSimpleFontSubsitution.cgm Regards, Don > At 10:22 AM 3/17/2009 -0500, Forrest Carpenter wrote: > >Don, > > > >aciMitreLimit aci file <mitreLimit limitVal=5 /> > > should be <mitreLimit limitVal="5" /> > >CGM file is clear text, should be binary > > > >aciRestrictedTextType aci file OK > >CGM file is clear text, should be binary > > > >aciLineEdgeType aci file OK > >CGM file is clear text, should be binary > > > >aciHatchStyleDef aci file </hatchStyleDef> > > should be /> > >CGM file is clear text, should be binary > > > >aciLineAtt aci file <lineCap lineCapInd=2 lineDashInd=3 /> > > <lineJoin lineJoinInd=4 /> > > <lineTypeCont lineContMode=3 /> > > Should be <lineCap lineCapInd="2" lineDashInd="3" /> > > <lineJoin lineJoinInd="4" /> > > <lineTypeCont lineContMode="3" /> > >CGM file is clear text, should be binary > > > >aciEdgeAtt aci file OK > >CGM file is clear text, should be binary > > > >aciFontNormalization aci file <fontmap> and </fontmap> > > should be <fontMap> and </fontMap> > >CGM file is clear text, should be binary > > > >Regards, > >Forrest > > > > > >-----Original Message----- > >From: Don Larson (E-mail) [mailto:dlarson@cgmlarson.com] > >Sent: Tuesday, March 17, 2009 9:02 AM > >To: Lofton Henderson > >Cc: CGM Open WebCGM TC > >Subject: re[2]: [cgmo-webcgm] review of aci files > > > >Lofton, > > > >All of the following ACI files have been updated by adding- > > <?xml version = "1.0" ?> > > <!DOCTYPE webcgmConfig SYSTEM "webConfig.dtd"> > > > > > >aciFontNormalization > >aciGenericFonts > >aciMapListOrder > >aciLineAttr > >aciEdgeAttr > >aciLineEdgeTypeDef > >aciHatchStyleDef > >aciEdgeAttr.aci > >aciHatchStyleDef.aci > >aciLineAttr.aci > >aciLineEdgeTypeDef.aci > >aciMitreLimit.aci > >aciRestrictedTextType.aci > > > >Regards, > >Don L. > >Larson Software Technology > >www.cgmlarson.com > > > > > > > Don, > > > > > When you have corrected this, on every ACI file, could you please > inform > > > the TC via the TC list? > > > > > Then I'll update the matrix and we'll be ready for final steps toward > TC > > > "Approved". > > > > > Thanks, > > > -Lofton. > > > > > At 02:57 PM 3/16/2009 -0500, Forrest Carpenter wrote: > > > > > Lofton, > > > > > > None of the aci files in the test suite are valid xml files. Don has > > > corrected one error I pointed out in his latest update but all aci > files > > > in the test suite are missing the two lines below, the first line is > > > required and the second line should be included > > > > > > <?xml version = "1.0" ?> > > > <!DOCTYPE webcgmConfig SYSTEM "webConfig.dtd"> > > > > > > Regards, > > > Forrest > > > > > > > > > > > > > > > > > > From: Lofton Henderson [mailto:lofton@rockynet.com] > > > Sent: Monday, March 16, 2009 1:33 PM > > > To: Forrest Carpenter; 'WebCGM' > > > Subject: Re: [cgmo-webcgm] review of aci files > > > > > > > > > > > > Forrest, > > > > > At 09:41 AM 3/10/2009 -0500, Forrest Carpenter wrote: > > > > > > > > I don t believe the aci files provided in the tests are valid. I have > > > attached an example of what I believe the files should look like. I > have > > > also found one error in the DTD, dashlength should be changed to > > > dashLength. > > > > > > > > > Can you be specific, what files you are referring to? I.e., list > them? > > > You had the Action to review these 7: > > > > > aciFontNormalization > > > aciGenericFonts > > > aciMapListOrder > > > aciLineAttr > > > aciEdgeAttr > > > aciLineEdgeTypeDef > > > aciHatchStyleDef > > > > > Does your comment apply to all 7 of these? > > > > > Then Don sent an update message saying he had updated this different > set > > > of files: > > > > > aciEdgeAttr.aci > > > aciHatchStyleDef.aci > > > aciLineAttr.aci > > > aciLineEdgeTypeDef.aci > > > aciMitreLimit.aci > > > aciRestrictedTextType.aci > > > > > I'm getting a little lost, trying to track the status of "Review" or > > > "Reworking", and who has the action item, in the matrix. > > > > > -Lofton. > > > >--------------------------------------------------------------------- > >To unsubscribe from this mail list, you must leave the OASIS TC that > >generates this mail. Follow this link to all your TCs in OASIS at: > >https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php > > > > > > > > > >--------------------------------------------------------------------- > >To unsubscribe from this mail list, you must leave the OASIS TC that > >generates this mail. Follow this link to all your TCs in OASIS at: > >https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php --------------------------------------------------------------------- To unsubscribe from this mail list, you must leave the OASIS TC that generates this mail. Follow this link to all your TCs in OASIS at: https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]