You can turn on, turn off, or dim a lighting group in your Remote Lighting Network by pressing the group number
button and then pressing the power button or the dimmer control.
Before you can operate a lighting group you must program
the network light bulbs you want included in that lighting group.
You must turn on, turn off, or dim an entire lighting group together. You cannot
control one individual light bulb in a group (unless only that light bulb is programmed
to the group).
-
Select the lighting group(s) you want to operate:
CAUTION: When selecting a lighting group, do not press and hold the
lighting group button for longer than 4 seconds. Doing so activates light
bulb programming for the selected lighting group.
For this situation... | Perform this task... |
---|
Operate the lighting group that was last controlled |
Do not press a lighting group button (pressing the button is
optional). The most recent lighting group remains current on the remote
control. |
Operate one lighting group |
Press the number button for the lighting group you want to
operate. |
Operate all lighting groups |
Press the 1-4 button. |
Turn on/off all network lights regardless of
programming |
Do not press a lighting group button (pressing any lighting group
button is irrelevant). Skip to the next step. |
Note: You have 5 seconds to operate the selected lighting group once it is
activated. After 5 seconds of inactivity (when the green indicator light
turns of), you must start over.
The button indicator for the selected lighting group turns green when
the group is activated. If the indicator turns red, the lighting group was not
activated and you must try again.
-
Turn on, turn off, or dim the lighting group:
For this lighting result... | Perform this task... |
---|
Turn on/off |
Press the power button. The selected lighting group turns on if it
is currently off and turns off if it is currently on. |
Turn on/off all network lights regardless of
programming |
Press and hold the power button for 5 seconds. All network lights
(even if not programmed) initially turn on. Repeat this task to turn
them all off. |
Dim up (brighten) |
Press upward on the dimmer control. You do not have to press the
power button first. |
Dim down (soften) |
Press downward on the dimmer control. You do not have to press the
power button first. |
The power button indicator turns green if the signal is successfully
sent. If the indicator turns red, the signal was not sent and you must start
over.
The light bulbs in the selected lighting group turn on, turn off, or dim depending
on your selection.