Re: [docbook-apps] XREF text/label issue

[Christophe HARO <christophe.haro@free.fr>]

Sorry for the noise :

XSL-NS stylesheets 1.76.0 downloaded 04/09/2010


-- 
Christophe HARO
Christophe.HARO@free.fr
----------------------------

----- "Christophe HARO" <christophe.haro@free.fr> a écrit :

> I confirm that :
> 
> 1) sections are not numbered ;
> 2) generated text for XREF's : no "..." surrounding text (no << ... >>
> in French) ; number followed by a point, not a comma. Example : Figure
> 1.4. Les classes
> 
> -- 
> Christophe HARO
> Christophe.HARO@free.fr
> ----------------------------
> 
> ----- "deannelson" <deannelson@aol.com> a écrit :
> 
> > Ok, I tested this with the snapshot for 27-Aug-10 and it did not
> work
> > right. So the issue appears to be in the repository stylesheets.
> > 
> > The symptoms are that there are no number labeling at all except
> for
> > the TOC.
> > 
> > Can anyone confirm this?
> > 
> > Here is the xml and style sheet:
> > ---------------
> > <?xml version="1.0" encoding="ISO-8859-1" standalone="no"?>
> > <!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "
> > http://www.docbook.org/xml/4.5/docbookx.dtd ">
> > 
> > <chapter><title>Test</title>
> > <section>
> > <title>Calibration Schedule</title>
> > 
> > <para>Check number 2 calibration using the <emphasis
> > role="bold">froggy</emphasis>
> > procedures. See <xref linkend="TCL-sys"/>. </para>
> > </section>
> > 
> > <section id="TCL-sys">
> > 
> > <title>Tension Control Link</title>
> > 
> > <para>This system is used to verify calibration and provides a
> > completely independent check
> > of force measurement calibration. The Tension Calibration System is
> > traceable to the U.S.
> > National Institute of Standards and Technology. Needed to perform
> the
> > calibration are two
> > wood-faced steel paddles for insertion into the clamps, a tension
> load
> > cell with steel pins
> > for attachment to the paddles and a readout (TCL).</para>
> > </section>
> > </chapter>
> > -----------------------------
> > 
> > Customization XSL
> > -----------------------------
> > <?xml version="1.0" encoding="UTF-8"?>
> > <xsl:stylesheet xmlns:xsl=" http://www.w3.org/1999/XSL/Transform "
> > version="1.0"
> > xmlns:fo=" http://www.w3.org/1999/XSL/Format ">
> > 
> > <!-- Include the company standard stylesheet -->
> > <xsl:import
> href="../../doctools/docbook-xsl-1.75.2/fo/docbook.xsl"/>
> > 
> > <xsl:param name="xref.with.number.and.title">1</xsl:param>
> > <xsl:param
> name="section.label.includes.component.label">1</xsl:param>
> > <xsl:param name="section.autolabel">1</xsl:param>
> > <xsl:param name="section.autolabel.max.depth">10</xsl:param>
> > <xsl:param name="chapter.autolabel">1</xsl:param>
> > <xsl:param name="generate.section.toc.level">2</xsl:param>
> > <xsl:param name="toc.max.depth" select="6"></xsl:param>
> > 
> > <xsl:param name="label.from.part" select="1"></xsl:param>
> > <xsl:param name="component.label.includes.part.label"
> > select="1"></xsl:param>
> > </xsl:stylesheet>
> > 
> > 
> > 
> > 
> > In a message dated 09/03/10 11:56:21 Pacific Daylight Time,
> deannelson
> > writes:
> > 
> > 
> > 
> > Bob,
> > I'm using just the simple xrefs with linkends pointing to IDs.
> That's
> > what is so strange.
> > 
> > OK I just did some testing with clean 1.75.2 and it works as
> > advertised with and without my customization. I had done some
> updates
> > to the 1.75.2 from the subversion that seems to have broken some of
> > the labeling. So maybe I need to try the new release candidate
> first
> > before I try to dig out the updates to 1.75.2.
> > 
> > More later...
> > 
> > Dean
> > 
> > 
> > In a message dated 09/03/10 11:12:03 Pacific Daylight Time,
> > bobs@sagehill.net writes:
> > 
> > 
> > 
> > Hi Dean,
> > I can't duplicate you problem. I just tried a small customization
> that
> > imports 1.75.2 and sets the params you listed, and I get xrefs to
> > sections showing as:
> > 
> > Section 1.2, "Section Title"
> > 
> > So it seems to work in the base stylesheets, and I cannot tell what
> is
> > going wrong on your system. Are you using xrefstyle attributes in
> your
> > xrefs?
> > 
> > Bob Stayton
> > Sagehill Enterprises
> > bobs@sagehill.net
> > 
> > 
> > 
> > 
> > ----- Original Message -----
> > From: deannelson
> > To: docbook-apps@lists.oasis-open.org
> > Sent: Friday, September 03, 2010 10:39 AM
> > Subject: [docbook-apps] XREF text/label issue
> > 
> > 
> > Hello,
> > 
> > I have an issue that has either popped up or I just realized it. It
> > has to do with the XREF in certain instances it does not display
> the
> > numbered sections (i.e "see 1.2.3 Start Up Procedures "). This is
> > correct when referencing figures and chapters, but it leaves off
> the
> > number reference on sections and procedures and just leaves the
> title.
> > 
> > I'm pretty sure I have done something silly in the customization so
> I
> > tried a bare 1.75.2 stylesheet with the following additions but
> could
> > not seem to activate the number references, so I can't really say
> for
> > sure that it happens in the stock stylesheets.
> > 
> > 
> > <xsl:param name="xref.with.number.and.title">1</xsl:param>
> > <xsl:param
> name="section.label.includes.component.label">1</xsl:param>
> > <xsl:param name="section.autolabel">1</xsl:param>
> > <xsl:param name="section.autolabel.max.depth">10</xsl:param>
> > <xsl:param name="chapter.autolabel">1</xsl:param>
> > <xsl:param name="generate.section.toc.level">2</xsl:param>
> > <xsl:param name="toc.max.depth" select="6"></xsl:param>
> > 
> > <xsl:param name="label.from.part" select="1"></xsl:param>
> > <xsl:param name="component.label.includes.part.label"
> > select="1"></xsl:param>
> > 
> > 
> > So two questions:
> > 1. What do I need to do to activate the numbered references on the
> > above customization. I would assume that the first line should do
> it?
> > 2. Any ideas where to check? Is this a design issue in the DB XSL
> that
> > I missed?
> > 
> > Thanks
> > Dean Nelson
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: docbook-apps-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail:
> docbook-apps-help@lists.oasis-open.org