[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: AW: [docbook-apps] Listings placeable at the End of Printed Output?
|
Sorry again, and this time you see me annoyed. Maybe it’s best if you leave the mailing list, yes. 1)
As I interpret the list correctly, you cannot claim “an exclusive communication” to and from Bob Stayton. The list is about users helping users. That’s my ponit of view.
If the majority of the readers here have a different oppinion, please let me know. As long as I have the feeling that I am doing the right thing here, you may not forbid me to answer on ANY posting here (including yours). In this case, sorry for trying to
help you. 2)
I am probably not the professional in your eyes. But believe me, I also put hundreds of hours into DocBook XSL to customize it. 3)
Yes, I have fully read the full discussion. Still, my oppinion is that the example is plain and clear. I could use it out of the box within two minutes. I don’t know, where
your problem was. Good luck and bye. Ben Von: Eisele, Kai Alexander [mailto:k.eisele@cenit.de]
I would actually appreciate to have my request answered by the DocBook consulting exclusively. Besides, you won't manage to let me look like a fool. No, the example was not plain enough, which you would have noticed, if you had read the whole discussion. I had asked clear questions containing accurate specifications and received partially helpful as also partially wrong answers, which turned out to be useless as a whole in the end, because the aim
of generating the required appendix in the required form could not be reached by the support, I got here so far even from sides I had not asked at all. So, as a résumé, I regrettably must say that all of this here is a complete waste of time for me and the next thing, I shall do is to unsubscribe from this - in my view - useless mailing list. Best regards Kai Von: Kallauch, Benjamin (EEIN) [mailto:benjamin.kallauch2@volkswagen.de]
Hi, sorry for misunderstanding. It was not my intention to make you look a fool. I simply couldn’t understand the problem, because the example was plain enough and was running at once with my config.
Sometimes I see really strange side effects when parsing/transforming invalid XML… So, I thought, let you know that it was not well formed, is a good idea. Ok, it wasn’t. ;-) Regarding the issue: Combining the standard match=”appendix” template from fo/components.xsl helped me a little bit. At least you get an appendix title and a page number. Therefore, a toc entry with
page number with link and also PDF bookmark. Nevertheless: There is some fine tuning to do. Still, the LOTs don’t have titles generated in the toc. I hope I didn’t get you wrong again. regards, Ben Von: Eisele, Kai Alexander [mailto:k.eisele@cenit.de]
Hi, As to the missing </xsl:if> tag in the customization example below: a copy fault, occurring quite frequently when copying something from sources all over the web. But I did not report any XSLT syntax error being my current issue. Be assured, that the XSL customization layer I use is both well-formed and valid. Eventually, after a series of misunderstandings the intended appendix elements (figures, tables, examples) are written to the end of FO output.
HOWEVER: (1) As TOC entry I currently receive: "APPENDIX A. List of Figures, Tables, Examples .................................... " yet without a page number being displayed and therefore not a clickable TOC
entry, which is rather unpleasant. So, how can I configure an appendix TOC entry according to the common chapter or section TOC entries? (2) Furthermore, the appendix configured this way does not have a title (like: "APPENDIX") displayed on the page, the appendix starts with. Instead of first showing an appendix title, the figure element
title ("List of Figures") is directly displayed. How could I possibly adjust this? The related DocBook XML contains an appendix element with a "role=lot" attribute, a specified title and an "id=app_a" attribute, which does not prevent the Apache 1.1 FOP from
displaying a "WARNING: Page 3: Unresolved ID reference "app_a" found." which is "WARNING: Page 3: Unresolved ID reference "d61e2804" found." otherwise, when not specifying an 'id' attribute value. Kai Von: Kallauch, Benjamin (EEIN) [mailto:benjamin.kallauch2@volkswagen.de]
Kai, I checked the example as well, using Xalan/FOP1.1 and DB4.5. Everything is fine, and I received the LOTs within my appendix at the end of the document. Maybe some ideas: -
Check if you had an appendix element with a role attribute filled with ‘lot’. -
Check your template. The template below is not well formed by the way (missing closing xs:if element.) Regards, Ben Von: Eisele, Kai Alexander [mailto:k.eisele@cenit.de]
No problem... I had also already tried leaving out the namespace prefix, the result is the same: No appendix is created at the end of the PDF. Currently, I am using the following customization (extract): <?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:d="http://docbook.org/ns/docbook"
version="1.0"> ... <xsl:import href=""> ... <xsl:param name="generate.toc"> appendix nop <!-- tried also: toc,title resp. toc,title,figure,table,example --> ... book toc,title ... </xsl:param> <!-- Template adjustment to have lists of titles (figures, tables, examples) attached to the end of printed output --> <xsl:template match="appendix[@role = 'lot']"> <xsl:variable name="lot-master-reference"> <xsl:call-template name="select.pagemaster"> <xsl:with-param name="pageclass" select="'lot'"/> </xsl:call-template> </xsl:variable> <xsl:if test="//figure"> <xsl:call-template name="page.sequence"> <xsl:with-param name="master-reference" select="$lot-master-reference"/> <xsl:with-param name="element" select="'toc'"/> <xsl:with-param name="gentext-key" select="'ListofFigures'"/> <xsl:with-param name="content"> <xsl:call-template name="list.of.titles"> <xsl:with-param name="titles" select="'figure'"/> <xsl:with-param name="nodes" select="//figure"/> </xsl:call-template> </xsl:with-param> </xsl:call-template> <xsl:if test="//table"> <xsl:call-template name="page.sequence"> <xsl:with-param name="master-reference" select="$lot-master-reference"/> <xsl:with-param name="element" select="'toc'"/> <xsl:with-param name="gentext-key" select="'ListofTables'"/> <xsl:with-param name="content"> <xsl:call-template name="list.of.titles"> <xsl:with-param name="titles" select="'table'"/> <xsl:with-param name="nodes" select="//table"/> </xsl:call-template> </xsl:with-param> </xsl:call-template> </xsl:if> <xsl:if test="//example"> <xsl:call-template name="page.sequence"> <xsl:with-param name="master-reference" select="$lot-master-reference"/> <xsl:with-param name="element" select="'toc'"/> <xsl:with-param name="gentext-key" select="'ListofExamples'"/> <xsl:with-param name="content"> <xsl:call-template name="list.of.titles"> <xsl:with-param name="titles" select="'example'"/> <xsl:with-param name="nodes" select="//example"/> </xsl:call-template> </xsl:with-param> </xsl:call-template> </xsl:if>
</xsl:template> ... </xsl:stylesheet> For me it seems as if only the standard creation of Lists of Titles in the document's front were working in DocBook V4.5 Kai Alexander Eisele CENIT AG -----Ursprüngliche Nachricht----- Sorry, I assumed you were using DocBook5 and the namespaced version of
the stylesheets, now I see that you are using DocBook 4. In the
customization I gave you, just remove the "d:" namespace prefix from the element names, then the stylesheet will recognize the elements in your document. Bob Stayton Sagehill Enterprises On 4/17/2015 2:54 AM, Eisele, Kai Alexander wrote: > Hi, > > Sorry, but this does not work for me. > > Here some relevant data, that may be necessary for further analysis: > > _Used tools/software_ > > __ > > XSLT Processor: Saxon Version 9-5-1-8 > > FO Processor: Apache FOP 1.1 > > XSL Stylesheet Files Distribution: ZIP-Release 1.78.1 downloaded from
> sourceforge.net > > DocBook V4.5 edited with XMLmind XML Editor Professional Edition 6.1.0 > > I inserted the following passages into my XSL customization layer: > > <?xml version='1.0'?> > > <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" > xmlns:fo="http://www.w3.org/1999/XSL/Format" > xmlns:d="http://docbook.org/ns/docbook" version="1.0"> > > ... > > <xsl:import > href=""> > > ... > > <xsl:param name="generate.toc"> > > appendix nop <!-- tried also: toc,title resp. > toc,title,figure,table,example --> > > ... > > book toc,title > > ... > > </xsl:param> > > <!-- Template adjustment to have lists of titles (figures,
> tables, > examples) attached to the end of printed output --> > > <!-- Declared d xml namespace on top as you can see, yet not
> sure, whether that is neither correct nor required in DocBook V4.5 --> > > <xsl:template match="d:appendix[@role = 'lot']"> > > <xsl:variable name="lot-master-reference"> > > <xsl:call-template name="select.pagemaster"> > > <xsl:with-param name="pageclass" select="'lot'"/> > > </xsl:call-template> > > </xsl:variable> > > <xsl:if test="//d:figure"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" > select="'ListofFigures'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'figure'"/> > > <xsl:with-param name="nodes" select="//d:figure"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > <xsl:if test="//d:table"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" > select="'ListofTables'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'table'"/> > > <xsl:with-param name="nodes" select="//d:table"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > </xsl:if> > > <xsl:if test="//d:example"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" > select="'ListofExamples'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'example'"/> > > <xsl:with-param name="nodes" select="//d:example"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > </xsl:if> > > </xsl:template> > > ... > > </xsl:stylesheet> > > As to the appendix' customization's result in printed output, it just
> seems to be ignored by XSLT and FOP. > > The processors run through it without any warnings or error messages,
> everything appears to be alright, yet no appendix is created in the PDF. > Only the standard book TOC is available in the front of the document. > > Maybe I should try the alternative, you mentioned, which is to let the
> stylesheet create an appendix or appendices automatically? > > Because that is, what should be done as a rule by the XSL
> customization layer we need for our print output documentation purposes. > > Regards > > Kai Alexander Eisele > > -----Ursprüngliche Nachricht----- > Von: Bob Stayton [mailto:bobs@sagehill.net] > Gesendet: Mittwoch, 15. April 2015 18:02 > An: Eisele, Kai Alexander;
docbook-apps@lists.oasis-open.org > Betreff: Re: [docbook-apps] Listings placeable at the End of Printed Output? > > Hi, > > Yes, it is possible to do this. You could get the stylesheet to do it
> automatically, but you could also use a special appendix file as you
> suggest to trigger it only for certain documents. That appendix would
> need a role attribute to trigger the special processing. > > In the template matching on the book element in fo/division.xsl, it
> calls the "make.book.tocs" template before the content. That template
> checks the "generate.toc" stylesheet param to see which lists to
> generate. You would want to set "generate.toc" to just "book toc,title" > > so it doesn't generate the other lists in the front. > > Then you create a custom template for your special appendix to
> generate the lists of titles, borrowing much of the code from the
> "make.book.tocs" template, something like: > > <xsl:template match="d:appendix[@role = 'lot']"> > > <xsl:variable name="lot-master-reference"> > > <xsl:call-template name="select.pagemaster"> > > <xsl:with-param name="pageclass" select="'lot'"/> > > </xsl:call-template> > > </xsl:variable> > > <xsl:if test="//d:figure"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" select="'ListofFigures'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'figure'"/> > > <xsl:with-param name="nodes" select="//d:figure"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > <!-- repeat for tables, examples, etc. --> > > </xsl:if> > > Note you need to change the select attribute for figure from .//figure
> (the context relative to the book element) to //figure so the appendix
> context can find the figure elements. > > This special appendix will also generate an entry in the main TOC,
> unless you further customize to turn that off or change its appearance. > > Bob Stayton > > Sagehill Enterprises > > bobs@sagehill.net <mailto:bobs@sagehill.net> > > On 4/15/2015 3:11 AM, Eisele, Kai Alexander wrote: > > > Hi, > > > > > > Is there any chance to have lists of figures, tables and examples > > > positioned at the end of printed output (PDF documents)? > > > > > > By default, the listings appear at the beginning of the documents > > > right after the actual TOC. > > > > > > Is it possible to customize a sort of document appendix, that
> contains > > > the lists of figures, tables and examples? > > > > > > Regards > > > > > > > > > *Kai Alexander Eisele* > > > SAP CC > > > > > > *CENIT AG * > > > Industriestraße 52-54 > > > D-70565 Stuttgart > > > Phone: +49 (0) 711-78 25-3241 > > > Fax: +49 (0)711 7825 44-4145 > > > > > > k.eisele@cenit.de <mailto:k.eisele@cenit.de>
> > > > > > www.cenit.com <http://www.cenit.com>
> <http://www.cenit.com/en_EN.html>__ > > > > > > > > > CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 > > > 7825-30, Fax: +49 711 7825-4000, Internet:
www.cenit.de > > > Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen, > > > Oelsnitz, Ratingen, Saarbruecken > > > Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt > > > Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des > > > Aufsichtsrats), Hubert Leypoldt, Andreas Karrer > > > Bankverbindungen: > > > Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070 > > > 0166 > > > 1040 00 SWIFT-CODE : DEUTDESS, > > > Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071 > > > 0532 > > > 0155 00 SWIFT-Code : COBADEFF600, > > > Registergericht: Amtsgericht Stuttgart > > > Handelsregister: HRB Nr. 19117 > > > Umsatzsteuer: ID-Nr. DE 147 862 777 > > > > > > CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711
> 7825-30, Fax: +49 711 7825-4000, Internet:
www.cenit.de > Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen,
> Oelsnitz, Ratingen, Saarbruecken > Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt > Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des
> Aufsichtsrats), Hubert Leypoldt, Andreas Karrer > Bankverbindungen: > Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070
> 0166 > 1040 00 SWIFT-CODE : DEUTDESS, > Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071
> 0532 > 0155 00 SWIFT-Code : COBADEFF600, > Registergericht: Amtsgericht Stuttgart > Handelsregister: HRB Nr. 19117 > Umsatzsteuer: ID-Nr. DE 147 862 777 > CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 7825-30, Fax: +49 711 7825-4000, Internet:
www.cenit.de CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 7825-30, Fax: +49 711 7825-4000, Internet:
www.cenit.de CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 7825-30, Fax: +49 711 7825-4000, Internet: www.cenit.de |
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]