OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

ebxml-msg message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Groups - Multi-hop Section Draft 0.23 (ebMS3-Multihop-V23-Jan07-09.doc) uploaded


An incremental rev. Not much new content, but a more appropriate handling
of wsa headers.

V0.23:
- modified the way the draft refers to wsa headers, see section 1.7.1.2.
- added most of the previous content about wsa headers and in particular
wsa:ReplyTo, in new appendix B (1.11)
- a few additional minor edits.


 -- Mr Jacques Durand

The document revision named Multi-hop Section Draft 0.23
(ebMS3-Multihop-V23-Jan07-09.doc) has been submitted by Mr Jacques Durand
to the OASIS ebXML Messaging Services TC document repository.  This
document is revision #20 of ebMS3-Multihop.doc.

Document Description:
Draft of the multi-hop section.
V0.3:
- a few updates in the definition section (editorial)
- added a commented Flow diagram (section 1.7.1) on RM sequence
establishment. To review.
V0.4:
- section 1.5 (Intermediary Role) rewritten, though not complete yet.
(diff with 0.3 visible)
V0,5:
- section 1.5 updated based on feedback and extended for response
messages.
V0.14:
- Section 1.5 redefines multihop MEPs in terms of first hop + last hop. It
does not include the routing inside the I-Cloud which is relevant to the
routing function.
- Section 1.5.4: Two options for multi-hop pulling ... and probably one too
many.... Need to define multihop pulling.
- Section 1.6.3 on routing function has been edited.
- Section 1.8 on PModes has been deeply redesigned based on what was said
prior

V0.6:
- Added text to section 1.5 on streaming and store-and-forward models for
implementing intermediaries
V0.7:
- Changed the text describing the streaming model to include two sub cases,
asynchronous and synchronous streaming.
V0.8:
- a few updates / corrections (diffs visible)
- fleshed out the "routing of Acks" multihop subsection at the
end.
V0.9:
- Updated definition of routing function and mep bridging
- Changes to section on details of the routing function. The changes here
are mostly textual. Changes shouldn't have impact on spec itself.
V0.10:
- Moved section 1.4.3 Endpoints requirements to 1.6 where requirements can
be more explicitly formulated
- Reformatted handling of routing input by intermediary
- New section 1.6 on Endpoints requirements, includes introduction of
RefParam PMode feature
- Added section 1.7 to specify definition of WS-A reference parameter
V0.11:
- Added text to section 1.4.6 on specific MEP bindings for multi-hop
V0.12:
- added missing flow diagrams (not yet fully comented)
- inserted text for Section 1.8.
- added several comments ([jacques]) and complement text (diffs visible)
V0.13:
- more complete draft of the MEP section 1.5, with multihop channel
bindings.
- added a new section on PModes for multihop (1.8)
- minor changes in 1.7
- expanded on the Error handling section (1.4.5)
V0.15:
- Section 1.5 redefines multihop MEPs in terms of first hop + last hop. It
does not include the routing inside the I-Cloud which is relevant to the
routing function.
- Section 1.5.4: Two options for multi-hop pulling ... and probably one too
many.... Need to define multihop pulling.
- Section 1.6.3 on routing function has been edited.
- Section 1.8 on PModes has been deeply redesigned based on what was said
prior
V0.16:
- more complete section 1.8
- figures added in MEP section, explicit model separating ICloud hops from
"peripheral hops".
V0.17:
- sharpening of terminology in earlier sections
- Section 1.5 largely rewritten, with updated figures (for terminology)
- still some clean-up to do in 1.5 and also 1.8
V0.18:
- remodeling of section 1.5, especially 1.5.2 and 1.5.3, with missing cases
and new figures.
- some figures migrated from 1.5 to 1.6
-section 1.7 on endpoint requirements, reorganized, with an addition on how
to interpret wsa:ReplyTo (1.7.3).
- edits in 1.8, with main addition 1.8.3 on how to control other aspects of
multihop edges binding (not complete yet)
V0.19:
- addressed most comemnts from Sander (Nov17, 2008) and some from Pim.
V0.20:
- Added a more complete WS-Addressing section (1.7.1)
- minor edits.
V0.22 (skipped 0.21)
- revision of section 1.7.1 on use of WS-Addressing (especially ReplyTo)
V0.23:
- modified the way the draft refers to wsa headers, see section 1.7.1.2.
- added most of the previous content about wsa headers and in particular
wsa:ReplyTo, in new appendix B (1.11)
- a few additional minor edits.


View Document Details:
http://www.oasis-open.org/committees/document.php?document_id=30635

Download Document:  
http://www.oasis-open.org/committees/download.php/30635/ebMS3-Multihop-V23-Jan07-09.doc

Revision:
This document is revision #20 of ebMS3-Multihop.doc.  The document details
page referenced above will show the complete revision history.


PLEASE NOTE:  If the above links do not work for you, your email application
may be breaking the link into two pieces.  You may be able to copy and paste
the entire link address into the address field of your web browser.

-OASIS Open Administration


[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]