SV: Input to CCB --- FW: [ plcslib-PLCS PSMmodel-3555619 ] No namespace defined?

[<mats.nilsson@fmv.se>]

All,

If there's a problem we need to resolve it. I have no comments against the suggested solution.
I will not be able to participate in the meeting today.

Regards,

Mats Nilsson
FMV – Swedish Defence Materiel Administration
SE-115 88 Stockholm, Sweden
Tel: +46 8 782 47 24 Mobile:+46 70 267 47 24
E-mail: mats.nilsson@fmv.se

> Skickat: den 17 augusti 2012 11:03
> Till: (plcs-tog@lists.oasis-open.org)
> Ämne: [plcs-tog] RE: Input to CCB --- FW: [ plcslib-PLCS PSMmodel-3555619 ]
> No namespace defined?
> 
> I should have said .. perhaps we can discuss this on Mondays call?
> 
> Regards
> Rob
> --------------------------------------------------------------------------------
> Dr Rob Bodington
> Eurostep Limited
> Web Page: http://www.eurostep.com
> Email: Rob.Bodington@eurostep.com
> Phone: +44 (0)1452 810 960
> Mobile: +44 (0)7796 176 401
> Skype: rbodington
> Eurostep Limited. Registered in England and Wales No.03049099 Registered
> Office: Cwttir Lane, St. Asaph, Denbighshire LL17 0LQ.
> 
> 
> 
> 
> > -----Original Message-----
> > From: plcs-tog@lists.oasis-open.org
> > [mailto:plcs-tog@lists.oasis-open.org]
> > On Behalf Of Rob Bodington
> > Sent: 17 August 2012 09:25
> > To: (plcs-tog@lists.oasis-open.org)
> > Subject: [plcs-tog] Input to CCB --- FW: [ plcslib-PLCS
> > PSMmodel-3555619 ] No namespace defined?
> >
> > Hi
> > I have raised the issue below for discussion on the CCB.
> > Basically we currently do not have a namespace for the PLCS PSM XSD
> >
> > Looking into it .. it is clear that we need to revisit the namespaces
> > for the reference data.
> >
> > There is a proposal attached to the issue
> >
> https://sourceforge.net/tracker/index.php?func=detail&aid=3555619&grou
> > p_id=624136&atid=2771391
> >
> > It should be publically accessible - if not  let me know.
> >
> > Regards
> > Rob
> > ----------------------------------------------------------------------
> > ----------
> > Dr Rob Bodington
> > Eurostep Limited
> > Web Page: http://www.eurostep.com
> > Email: Rob.Bodington@eurostep.com
> > Phone: +44 (0)1452 810 960
> > Mobile: +44 (0)7796 176 401
> > Skype: rbodington
> > Eurostep Limited. Registered in England and Wales No.03049099
> > Registered
> > Office: Cwttir Lane, St. Asaph, Denbighshire LL17 0LQ.
> >
> >
> >
> > -----Original Message-----
> > From: SourceForge.net [mailto:noreply@sourceforge.net]
> > Sent: 17 August 2012 09:17
> > To: SourceForge.net
> > Subject: [ plcslib-PLCS PSMmodel-3555619 ] No namespace defined?
> >
> > PLCS PSMmodel item #3555619, was opened at 2012-08-09 02:48 Message
> > generated for change (Settings changed) made by robbod You can respond
> > by visiting:
> >
> https://sourceforge.net/tracker/?func=detail&atid=2771391&aid=3555619&;
> > g
> > roup_id=624136
> >
> > Please note that this message will contain a full copy of the comment
> > thread, including the initial issue submission, for this request, not
> > just the latest update.
> > Category: PLCS PSM XSD
> > Group: None
> > Status: Open
> > >Resolution: Remind
> > Priority: 6
> > Private: No
> > Submitted By: Patrick Houbaux (phoubaux) Assigned to:
> > Nobody/Anonymous (nobody)
> > Summary: No namespace defined?
> >
> > Initial Comment:
> > The XSD should define a target namespace :
> >
> > proposal:
> > http://docs.oasis-open.org/ns/plcs/plcsPsm
> >
> > ----------------------------------------------------------------------
> >
> > Comment By: Rob Bodington (robbod)
> > Date: 2012-08-17 01:16
> >
> > Message:
> > A proposal is in teh attached document  plcs_namespaces.docx
> >
> > ----------------------------------------------------------------------
> >
> > You can respond by visiting:
> >
> https://sourceforge.net/tracker/?func=detail&atid=2771391&aid=3555619&;
> > g
> > roup_id=624136