sca-bindings message
[Date Prev]
| [Thread Prev]
| [Thread Next]
| [Date Next]
--
[Date Index]
| [Thread Index]
| [List Home]
Subject: RE: [sca-bindings] ISSUE 19: Web Service binding should allow #wsdl.bindingwith reference targets
- From: Simon Nash <NASH@uk.ibm.com>
- To: "OASIS Bindings" <sca-bindings@lists.oasis-open.org>
- Date: Wed, 26 Mar 2008 18:08:18 +0000
Mike,
Good catch! I had intended to
include the "no service callback URI" case but somehow I got
myself too enthusiastically into "cut and paste" mode and overlooked
this. I had intended to say that for a service callback binding,
the URI MAY be present, rather than MUST be present. This is not
quite the same as what you are saying. My reason for allowing this
URI to be present optionally is that there may be cases where the callback
URI address is not available at runtime, so a URI specified here would
provide a default that could be used in these cases. (The JMS binding
explicitly allows for this.) Alternatively, providing a default here
could be outlawed completely, as you suggest..
Here is my "take2" proposal.
I have included variants A and B of the proposed text depending on
whether or not we allow a default URI to be specified on a service callback
binding.
REFERENCES
In our resolution of BINDINGS-17, we agreed that references with bindings
must be "bound". For this binding.ws case of wsdlElement="...#wsdl.binding...",
the reference becomes bound by specifying a URI attribute on the
binding. So the existing specification text in lines 82 and 83 is
correct and needs no change.
SERVICES
The endpoint address URI can be provided by a URI attribute on the binding,
or it can be provided via the implict URI as defined by the Assembly specification
(see points 2 and 3 in section 2.1, lines 105 to 107). So the existing
specification text in lines 82 and 83 is incomplete because it does not
allow for the second of these possibilities.
CALLBACKS ON REFERENCES
For callbacks, the service and reference roles are reversed and I believe
the rules in section 2.1 should apply to binding elements specified in
the callback element of a reference.
CALLBACKS ON SERVICES
For callbacks, the service and reference roles are reversed. Normally
the callback URI would be provided by the service invoker at runtime, but
there is some rationale for optionally allowing it to be "bound"
as described in the resolution to BINDINGS-17. If the callback URI
is provided at runtime, it would always override any URI specified in SCDL.
PROPOSAL (OPTION A)
In the Web Service binding spec, lines 82 and 83, replace "...the
endpoint address URI for the SCA service or reference must be provided
via the URI attribute on the binding." by "...the endpoint address
URI for an SCA reference MUST be provided as the URI attribute on the binding,
and the endpoint address URI for an SCA service or the callback element
of an SCA reference MUST be provided as specified in section 2.1. For
the callback element of an SCA service, a default endpoint address URI
MAY be provided as the URI attribute on the binding.".
PROPOSAL (OPTION B)
In the Web Service binding spec, lines 82 and 83, replace "...the
endpoint address URI for the SCA service or reference must be provided
via the URI attribute on the binding." by "...the endpoint address
URI for an SCA reference MUST be provided as the URI attribute on the binding,
and the endpoint address URI for an SCA service or the callback element
of an SCA reference MUST be provided as specified in section 2.1. For
the callback element of an SCA service, the binding MUST NOT specify an
endpoint address URI.".
Simon
Simon C. Nash, IBM Distinguished Engineer
Member of the IBM Academy of Technology
Tel. +44-1962-815156 Fax +44-1962-818999
Mike Edwards/UK/IBM@IBMGB
26/03/2008 11:45
|
To
| "OASIS Bindings" <sca-bindings@lists.oasis-open.org>
|
cc
|
|
Subject
| RE: [sca-bindings] ISSUE 19: Web Service
binding should allow #wsdl.binding with reference targets |
|
Simon,
I'm not sure I follow your proposal where it deals with Callback URIs.
For a service with a callback, I would not typically expect any URI to
be present on the service relating to the
callback, since the callback address is applied dynamically at runtime.
So a blank URI must be allowed
(if a URI is supplied it implies that the callback goes somewhere else
other than the client - I'd be happy
to make this capability illegal).
I can see the possibility of needing to express an endpoint address for
the callback on the reference - since
a URI needs to be created for what is effectively an endpoint.
However, unless I've got confused - this is not what the text below is
saying.
Yours, Mike.
Strategist - Emerging Technologies, SCA & SDO.
Co Chair OASIS SCA Assembly TC.
IBM Hursley Park, Mail Point 146, Winchester, SO21 2JN, Great Britain.
Phone & FAX: +44-1962-818014 Mobile: +44-7802-467431
Email: mike_edwards@uk.ibm.com
Simon Nash/UK/IBM@IBMGB
25/03/2008 17:01
|
To
| sca-bindings@lists.oasis-open.org
|
cc
|
|
Subject
| RE: [sca-bindings] ISSUE 19: Web Service
binding should allow #wsdl.binding with reference targets |
|
This is the completion of my action to post an updated proposal for the
resolution of this issue.
I'd like to focus on the words in lines 82 and 83 and consider the 4 cases
of references, services, reference callbacks and service callbacks.
REFERENCES
In our resolution of BINDINGS-17, we agreed that references with bindings
must be "bound". For this binding.ws case of wsdlElement="...#wsdl.binding...",
the reference becomes bound by specifying a URI attribute on the
binding. So the existing specification text in lines 82 and 83 is
correct and needs no change.
SERVICES
The endpoint address URI can be provided by a URI attribute on the binding,
or it can be provided via the implict URI as defined by the Assembly specification
(see points 2 and 3 in section 2.1, lines 105 to 107). So the existing
specification text in lines 82 and 83 is incomplete because it does not
allow for the second of these possibilities.
CALLBACKS ON REFERENCES
For callbacks, the service and reference roles are reversed and I believe
the rules in section 2.1 should apply to binding elements specified in
the callback element of a reference.
CALLBACKS ON SERVICES
For callbacks, the service and reference roles are reversed and I believe
the resolution to BINDINGS-17 implies that binding elements specified in
the callback element of a service must be "bound".
PROPOSAL
The following proposed wording change embodies the above points:
In the Web Service binding spec, lines 82 and 83, replace "...the
endpoint address URI for the SCA service or reference must be provided
via the URI attribute on the binding" by "...the endpoint address
URI for an SCA reference or the callback element of an SCA service MUST
be provided as the URI attribute on the binding, and the endpoint address
URI for an SCA service or the callback element of an SCA reference MUST
be provided as specified in section 2.1".
Simon
Simon C. Nash, IBM Distinguished Engineer
Member of the IBM Academy of Technology
Tel. +44-1962-815156 Fax +44-1962-818999
"Michael Rowley"
<mrowley@bea.com>
28/02/2008 18:04
|
To
| Simon Nash/UK/IBM@IBMGB, <sca-bindings@lists.oasis-open.org>
|
cc
|
|
Subject
| RE: [sca-bindings] ISSUE 19: Web Service
binding should allow #wsdl.binding with reference targets |
|
We noted a couple things about the new text (starting at “or by ...”).
1)
These are primarily
relevant when the binding.ws is on a reference, not a service or callback.
2)
If it uses SCA targeting
mechanisms, the targeted service must provide a binding.ws that refers
to the same WSDL <binding>.
By “same” I mean a <binding> element with the same name in a WSDL
document with the same targetNamespace as the URI used in the @wsdlElement
attribute.
Reminder we are talking about this case:
<reference name=”foo”>
<binding.ws wsdlElement=”http://some.domain/some/ws#binding(bindingName)“/>
</reference>
Michael
From: Simon Nash [mailto:NASH@uk.ibm.com]
Sent: Thursday, February 21, 2008 5:47 AM
To: sca-bindings@lists.oasis-open.org
Subject: Re: [sca-bindings] ISSUE 19: Web Service binding should allow
#wsdl.binding with reference targets
On last week's sca-bindings call, I took an action to post an updated proposal
for the resolution of this issue, based on some words posted by Michael
Rowley in the chat room. Here's my proposal.
In the Web Service binding spec, lines 53 and 54, replace "...the
endpoint address URI for the SCA service or reference must be provided
via the URI attribute on the binding" by "the endpoint address
URI for an SCA service MUST be provided as the URI attribute on the binding,
and the endpoint address URI for an SCA reference MUST be provided either
as the URI attribute on the binding or by the endpoint address implied
by a reference target URI or wire target URI".
Simon
Simon C. Nash, IBM Distinguished Engineer
Member of the IBM Academy of Technology
Tel. +44-1962-815156 Fax +44-1962-818999
Eric Johnson <eric@tibco.com>
28/11/2007 21:29
|
To
| Simon Nash/UK/IBM@IBMGB
|
cc
| sca-bindings@lists.oasis-open.org
|
Subject
| Re: [sca-bindings] ISSUE 19: Web Service
binding should allow #wsdl.binding with reference targets |
|
Logged as: http://www.osoa.org/jira/browse/BINDINGS-19
-Eric.
Simon Nash wrote:
> Target:
>
> SCA Web Service Binding Specification, section 2.1 (Web Service Binding
> Schema)
>
> Description:
>
> The description of the #wsdl.binding form of the /binding.ws/@wsdlElement
> attribute says that the endpoint address URI for the SCA service or
> reference must be provided via the URI attribute on the binding. For
> references, this seems inconsistent with the assembly spec, which
supports
> binding URIs, reference targets and wire targets as alternative ways
of
> connecting references to services.
>
> Proposal:
>
> In the Web Service binding spec, lines 53 and 54, replace "...the
endpoint
> address URI for the SCA service or reference must be provided via
the URI
> attribute on the binding" by "the endpoint address URI for
the SCA service
> or reference must be provided via the URI attribute on the binding,
or
> (for reference bindings only) via a reference target URI or wire target
> URI".
>
> Simon
>
> Simon C. Nash, IBM Distinguished Engineer
> Member of the IBM Academy of Technology
> Tel. +44-1962-815156 Fax +44-1962-818999
>
>
>
>
>
> Unless stated otherwise above:
> IBM United Kingdom Limited - Registered in England and Wales with
number
> 741598.
> Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire
PO6 3AU
>
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe from this mail list, you must leave the OASIS TC that
> generates this mail. You may a link to this group and all your
TCs in OASIS
> at:
> https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php
>
>
---------------------------------------------------------------------
To unsubscribe from this mail list, you must leave the OASIS TC that
generates this mail. You may a link to this group and all your TCs
in OASIS
at:
https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU
[Date Prev]
| [Thread Prev]
| [Thread Next]
| [Date Next]
--
[Date Index]
| [Thread Index]
| [List Home]