[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [PATCH v3 1/1] virtio-net: define support for receive-side scaling
Fixes https://github.com/oasis-tcs/virtio-spec/issues/48
Added support for RSS receive steering mode.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
---
conformance.tex | 2 +
content.tex | 232 ++++++++++++++++++++++++++++++++++++++++++++----
2 files changed, 215 insertions(+), 19 deletions(-)
diff --git a/conformance.tex b/conformance.tex
index 0ac58aa..01449c5 100644
--- a/conformance.tex
+++ b/conformance.tex
@@ -101,6 +101,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Gratuitous Packet Sending}
\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Offloads State Configuration / Setting Offloads State}
+\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) }
\end{itemize}
\conformance{\subsection}{Block Driver Conformance}\label{sec:Conformance / Driver Conformance / Block Driver Conformance}
@@ -257,6 +258,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
\item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Setting MAC Address Filtering}
\item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Gratuitous Packet Sending}
\item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
+\item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS processing}
\end{itemize}
\conformance{\subsection}{Block Device Conformance}\label{sec:Conformance / Device Conformance / Block Device Conformance}
diff --git a/content.tex b/content.tex
index 679391e..12dc415 100644
--- a/content.tex
+++ b/content.tex
@@ -2752,7 +2752,7 @@ \subsection{Virtqueues}\label{sec:Device Types / Network Device / Virtqueues}
\item[2N] controlq
\end{description}
- N=1 if VIRTIO_NET_F_MQ is not negotiated, otherwise N is set by
+ N=1 if VIRTIO_NET_F_MQ and VIRTIO_NET_F_RSS are not negotiated, otherwise N is set by
\field{max_virtqueue_pairs}.
controlq only exists if VIRTIO_NET_F_CTRL_VQ set.
@@ -2811,6 +2811,9 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits
\item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
channel.
+\item[VIRTIO_NET_F_RSS(60)] Device supports RSS (receive-side scaling)
+ with Toeplitz hash calculation and configurable hash parameters for receive steering
+
\item[VIRTIO_NET_F_RSC_EXT(61)] Device can process duplicated ACKs
and report number of coalesced segments and duplicated ACKs
@@ -2840,6 +2843,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device
\item[VIRTIO_NET_F_MQ] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_CTRL_MAC_ADDR] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_RSC_EXT] Requires VIRTIO_NET_F_HOST_TSO4 or VIRTIO_NET_F_HOST_TSO6.
+\item[VIRTIO_NET_F_RSS] Requires VIRTIO_NET_F_CTRL_VQ.
\end{description}
\subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types / Network Device / Feature bits / Legacy Interface: Feature bits}
@@ -2854,7 +2858,7 @@ \subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types / Network
\subsection{Device configuration layout}\label{sec:Device Types / Network Device / Device configuration layout}
\label{sec:Device Types / Block Device / Feature bits / Device configuration layout}
-Three driver-read-only configuration fields are currently defined. The \field{mac} address field
+Device configuration fields are listed below, they are read-only for a driver. The \field{mac} address field
always exists (though is only valid if VIRTIO_NET_F_MAC is set), and
\field{status} only exists if VIRTIO_NET_F_STATUS is set. Two
read-only bits (for the driver) are currently defined for the status field:
@@ -2866,23 +2870,58 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
\end{lstlisting}
The following driver-read-only field, \field{max_virtqueue_pairs} only exists if
-VIRTIO_NET_F_MQ is set. This field specifies the maximum number
+VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS is set. This field specifies the maximum number
of each of transmit and receive virtqueues (receiveq1\ldots receiveqN
-and transmitq1\ldots transmitqN respectively) that can be configured once VIRTIO_NET_F_MQ
+and transmitq1\ldots transmitqN respectively) that can be configured once at least one of these features
is negotiated.
The following driver-read-only field, \field{mtu} only exists if
VIRTIO_NET_F_MTU is set. This field specifies the maximum MTU for the driver to
use.
+Two following fields, \field{speed} and \field{duplex} are reserved.
\begin{lstlisting}
struct virtio_net_config {
u8 mac[6];
le16 status;
le16 max_virtqueue_pairs;
le16 mtu;
+ le32 speed;
+ u8 duplex;
+ u8 rss_max_key_size;
+ le16 rss_max_indirection_table_length;
+ le32 rss_supported_hash_types;
};
\end{lstlisting}
+\label{sec:Device Types / Network Device / Device configuration layout / RSS}
+Three following fields, \field{rss_max_key_size}, \field{rss_max_indirection_table_length}
+and \field{rss_supported_hash_types} only exist if VIRTIO_NET_F_RSS is set.
+
+Field \field{rss_max_key_size} specifies maximal supported length of RSS key in bytes.
+
+Field \field{rss_max_indirection_table_length} specifies maximal number of 16-bit entries in RSS indirection table.
+
+Field \field{rss_supported_hash_types} contains bitmask of supported RSS hash types.
+
+Hash types applicable for IPv4 packets:
+\begin{lstlisting}
+#define VIRTIO_NET_RSS_HASH_TYPE_IPv4 (1 << 0)
+#define VIRTIO_NET_RSS_HASH_TYPE_TCPv4 (1 << 1)
+#define VIRTIO_NET_RSS_HASH_TYPE_UDPv4 (1 << 2)
+\end{lstlisting}
+Hash types applicable for IPv6 packets without extension headers
+\begin{lstlisting}
+#define VIRTIO_NET_RSS_HASH_TYPE_IPv6 (1 << 3)
+#define VIRTIO_NET_RSS_HASH_TYPE_TCPv6 (1 << 4)
+#define VIRTIO_NET_RSS_HASH_TYPE_UDPv6 (1 << 5)
+\end{lstlisting}
+Hash types applicable for IPv6 packets with extension headers
+\begin{lstlisting}
+#define VIRTIO_NET_RSS_HASH_TYPE_IP_EX (1 << 6)
+#define VIRTIO_NET_RSS_HASH_TYPE_TCP_EX (1 << 7)
+#define VIRTIO_NET_RSS_HASH_TYPE_UDP_EX (1 << 8)
+\end{lstlisting}
+For exact meaning of VIRTIO_NET_RSS_HASH_TYPE_ flags see \ref{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS hash types}.
\devicenormative{\subsubsection}{Device configuration layout}{Device Types / Network Device / Device configuration layout}
@@ -2906,6 +2945,12 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
so without fragmentation, after VIRTIO_NET_F_MTU has been successfully
negotiated.
+The device MUST set \field{rss_max_key_size} to at least 40, if it offers
+VIRTIO_NET_F_RSS.
+
+The device MUST set \field{rss_max_indirection_table_length} to at least 128, if it offers
+VIRTIO_NET_F_RSS.
+
If the driver negotiates the VIRTIO_NET_F_STANDBY feature, the device MAY act
as a standby device for a primary device with the same MAC address.
@@ -3675,33 +3720,56 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
with class VIRTIO_NET_CTRL_ANNOUNCE and command VIRTIO_NET_CTRL_ANNOUNCE_ACK
before marking the buffer as used.
-\paragraph{Automatic receive steering in multiqueue mode}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
+\paragraph{Device operation in multiqueue mode}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Device operation in multiqueue mode}
-If the driver negotiates the VIRTIO_NET_F_MQ feature bit (depends
-on VIRTIO_NET_F_CTRL_VQ), it MAY transmit outgoing packets on one
-of the multiple transmitq1\ldots transmitqN and ask the device to
-queue incoming packets into one of the multiple receiveq1\ldots receiveqN
-depending on the packet flow.
+This specification defines following modes that a device MAY implement for operation with multiple transmit/receive virtqueues:
+\begin{itemize}
+\item Automatic receive steering as defined in \ref{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}.
+ If a device supports such mode, it offers VIRTIO_NET_F_MQ feature bit.
+\item Receive-side scaling as defined in \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS processing}.
+ If a device supports such mode, it offers VIRTIO_NET_F_RSS feature bit.
+\end{itemize}
-\begin{lstlisting}
-struct virtio_net_ctrl_mq {
- le16 virtqueue_pairs;
-};
+A device MAY support one of these features or both. The driver MAY negotiate any set of these features that the device supports.
+Multiqueue is disabled by default.
+
+The driver enables multiqueue by executing one of commands depending on selected mode of multiqueue operation.
+\begin{lstlisting}
#define VIRTIO_NET_CTRL_MQ 4
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
+ struct virtio_net_ctrl_mq_pairs_set {
+ le16 virtqueue_pairs;
+ };
+
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
+
+ #define VIRTIO_NET_CTRL_MQ_RSS_CONFIG 1
\end{lstlisting}
-Multiqueue is disabled by default. The driver enables multiqueue by
+In order to enable multiqueue mode with automatic receive steering the driver uses VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command with \field{virtqueue_pairs} > 1.
+
+In order to enable multiqueue mode with configurable receive-side steering the driver uses RSS VIRTIO_NET_CTRL_MQ_RSS_CONFIG command.
+
+In more than one multiqueue mode negotiated, the resulting device configuration is defined by the last command sent by the driver.
+
+\paragraph{Automatic receive steering in multiqueue mode}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
+
+If the driver negotiates the VIRTIO_NET_F_MQ feature bit (depends on VIRTIO_NET_F_CTRL_VQ), it MAY transmit outgoing packets on one
+of the multiple transmitq1\ldots transmitqN and ask the device to
+queue incoming packets into one of the multiple receiveq1\ldots receiveqN
+depending on the packet flow.
+
+
+The driver enables multiqueue by
executing the VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command, specifying
the number of the transmit and receive queues to be used up to
\field{max_virtqueue_pairs}; subsequently,
transmitq1\ldots transmitqn and receiveq1\ldots receiveqn where
n=\field{virtqueue_pairs} MAY be used.
-When multiqueue is enabled, the device MUST use automatic receive steering
+When multiqueue is enabled by VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command, the device MUST use automatic receive steering
based on packet flow. Programming of the receive steering
classificator is implicit. After the driver transmitted a packet of a
flow on transmitqX, the device SHOULD cause incoming packets for that flow to
@@ -3709,7 +3777,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
no packets have been transmitted yet, the device MAY steer a packet
to a random queue out of the specified receiveq1\ldots receiveqn.
-Multiqueue is disabled by setting \field{virtqueue_pairs} to 1 (this is
+Multiqueue is disabled by VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET with \field{virtqueue_pairs} to 1 (this is
the default) and waiting for the device to use the command buffer.
\drivernormative{\subparagraph}{Automatic receive steering in multiqueue mode}{Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
@@ -3728,8 +3796,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
\devicenormative{\subparagraph}{Automatic receive steering in multiqueue mode}{Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
-The device MUST queue packets only on any receiveq1 before the
-VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command.
+The device after initialization of reset MUST queue packets only on receiveq1.
The device MUST NOT queue packets on receive queues greater than
\field{virtqueue_pairs} once it has placed the
@@ -3741,6 +3808,133 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
according to the native endian of the guest rather than
(necessarily when not using the legacy interface) little-endian.
+\paragraph{Receive-side scaling (RSS)}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS)}
+A device offers feature VIRTIO_NET_F_RSS if it supports RSS receive steering with Toeplitz hash calculation and configurable parameters.
+
+A driver queries RSS capabilities of the device by reading device configuration as defined in \ref{sec:Device Types / Network Device / Device configuration layout / RSS}
+
+\subparagraph{Setting RSS parameters}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / Setting RSS parameters}
+
+Driver sends VIRTIO_NET_CTRL_MQ_RSS_CONFIG command using following format for \field{command-specific-data}:
+\begin{lstlisting}
+struct virtio_net_rss_config {
+ le32 hash_types;
+ le16 indirection_table_mask;
+ le16 unclassified_queue;
+ le16 indirection_table[indirection_table_length];
+ le16 max_tx_vq;
+ u8 hash_key_length;
+ u8 hash_key_data[hash_key_length];
+};
+\end{lstlisting}
+Field \field{hash_types} contains a bitmask of allowed hash types as
+defined in \ref{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS hash types}.
+
+Field \field{indirection_table_mask} is a mask to be applied to calculated hash to produce index in \field{indirection_table array}.
+Number of entries in \field{indirection_table} is (\field{indirection_table_mask} + 1).
+
+Field \field{unclassified_queue} contains 0-based index of receive virtqueue to place unclassified packets in. Index 0 corresponds to receiveq1.
+
+Field \field{indirection_table} contains array of 0-based indices of receive virtqueus. Index 0 corresponds to receiveq1.
+
+Driver indicates how many transmit virtqueues it MAY use, i.e. transmitq1 \ldots transmitqN, where N=\field{virtqueue_pairs}.
+
+A driver sets \field{max_tx_vq} to inform a device how many transmit virtqueues it may use (transmitq1\ldots transmitq \field{max_tx_vq}).
+
+\subparagraph{RSS hash types}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS hash types}
+
+The device calculates hash on IPv4 packets according to the field \field{hash_types} of virtio_net_rss_config structure as follows:
+\begin{itemize}
+\item If VIRTIO_NET_RSS_HASH_TYPE_TCPv4 is set and the packet has TCP header, the hash is calculated over following fields:
+\begin{itemize}
+\item Source IP address
+\item Destination IP address
+\item Source TCP port
+\item Destination TCP port
+\end{itemize}
+\item Else if VIRTIO_NET_RSS_HASH_TYPE_UDPv4 is set and the packet has UDP header, the hash is calculated over following fields:
+\begin{itemize}
+\item Source IP address
+\item Destination IP address
+\item Source UDP port
+\item Destination UDP port
+\end{itemize}
+\item Else if VIRTIO_NET_RSS_HASH_TYPE_IPv4 is set, the hash is calculated over following fields:
+\begin{itemize}
+\item Source IP address
+\item Destination IP address
+\end{itemize}
+\item Else the device does not calculate the hash
+\end{itemize}
+
+The device calculates hash on IPv6 packets without extension headers according to the field \field{hash_types} of virtio_net_rss_config structure as follows:
+\begin{itemize}
+\item If VIRTIO_NET_RSS_HASH_TYPE_TCPv6 is set and the packet has TCPv6 header, the hash is calculated over following fields:
+\begin{itemize}
+\item Source IPv6 address
+\item Destination IPv6 address
+\item Source TCP port
+\item Destination TCP port
+\end{itemize}
+\item Else if VIRTIO_NET_RSS_HASH_TYPE_UDPv6 is set and the packet has UDPv6 header, the hash is calculated over following fields:
+\begin{itemize}
+\item Source IPv6 address
+\item Destination IPv6 address
+\item Source UDP port
+\item Destination UDP port
+\end{itemize}
+\item Else if VIRTIO_NET_RSS_HASH_TYPE_IPv6 is set, the hash is calculated over following fields:
+\begin{itemize}
+\item Source IPv6 address
+\item Destination IPv6 address
+\end{itemize}
+\item Else the device does not calculate the hash
+\end{itemize}
+
+The device calculates hash on IPv6 packets with extension headers according to the field \field{hash_types} of virtio_net_rss_config structure as follows:
+\begin{itemize}
+\item If VIRTIO_NET_RSS_HASH_TYPE_TCP_EX is set and the packet has TCPv6 header, the hash is calculated over following fields:
+\begin{itemize}
+\item Home address from the home address option in the IPv6 destination options header. If the extension header is not present, use the Source IPv6 address.
+\item IPv6 address that is contained in the Routing-Header-Type-2 from the associated extension header. If the extension header is not present, use the Destination IPv6 address.
+\item Source TCP port
+\item Destination TCP port
+\end{itemize}
+\item Else if VIRTIO_NET_RSS_HASH_TYPE_UDP_EX is set and the packet has UDPv6 header, the hash is calculated over following fields:
+\begin{itemize}
+\item Home address from the home address option in the IPv6 destination options header. If the extension header is not present, use the Source IPv6 address.
+\item IPv6 address that is contained in the Routing-Header-Type-2 from the associated extension header. If the extension header is not present, use the Destination IPv6 address.
+\item Source UDP port
+\item Destination UDP port
+\end{itemize}
+\item Else if VIRTIO_NET_RSS_HASH_TYPE_IP_EX is set, the hash is calculated over following fields:
+\begin{itemize}
+\item Home address from the home address option in the IPv6 destination options header. If the extension header is not present, use the Source IPv6 address.
+\item IPv6 address that is contained in the Routing-Header-Type-2 from the associated extension header. If the extension header is not present, use the Destination IPv6 address.
+\end{itemize}
+\item Else skip IPv6 extension headers and calculate the hash as defined above for IPv6 packet without extension headers
+\end{itemize}
+
+\drivernormative{\subparagraph}{Setting RSS parameters}{Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) }
+
+A driver MUST NOT send VIRTIO_NET_CTRL_MQ_RSS_CONFIG command if the feature VIRTIO_NET_F_RSS has not been negotiated.
+
+A driver MUST fill \field{indirection_table} array only with indices of enabled queues. Index 0 corresponds to receiveq1.
+
+Number of entries in \field{indirection_table} (\field{indirection_table_mask} + 1) MUST be a power of two.
+
+A driver MUST use \field{indirection_table_mask} values that are less than \field{rss_max_indirection_table_length} reported by a device.
+
+A driver MUST NOT set any VIRTIO_NET_RSS_HASH_TYPE_ flags that are not supported by a device.
+
+\devicenormative{\subparagraph}{RSS processing}{Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS processing}
+The device MUST determine destination queue for network packet as follows:
+\begin{itemize}
+\item Calculate hash of the packet as defined in \ref{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS hash types}
+\item If the device did not calculate the hash for specific packet, the device directs the packet to the receiveq specified by \field{unclassified_queue} of virtio_net_rss_config structure (value of 0 corresponds to receiveq1).
+\item Apply \field{indirection_table_mask} to the calculated hash and use the result as the index in the indirection table to get 0-based number of destination receiveq (value of 0 corresponds to receiveq1).
+\end{itemize}
+
\paragraph{Offloads State Configuration}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Offloads State Configuration}
If the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature is negotiated, the driver can
--
2.17.2
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]