OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-comment message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: [PATCH v2 1/3] content: Document balloon feature free page hints


From: Alexander Duyck <alexander.h.duyck@linux.intel.com>

Free page hints allow the balloon driver to provide information on what
pages are not currently in use so that we can avoid the cost of copying
them in migration scenarios. Add a feature description for free page hints
describing basic functioning and requirements.

Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
---
 content.tex |  128 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 122 insertions(+), 6 deletions(-)

diff --git a/content.tex b/content.tex
index 91735e3eb018..ec0abf177526 100644
--- a/content.tex
+++ b/content.tex
@@ -5005,10 +5005,13 @@ \subsection{Virtqueues}\label{sec:Device Types / Memory Balloon Device / Virtque
 \begin{description}
 \item[0] inflateq
 \item[1] deflateq
-\item[2] statsq.
+\item[2] statsq
+\item[3] free_page_vq
 \end{description}
 
-  Virtqueue 2 only exists if VIRTIO_BALLOON_F_STATS_VQ set.
+  statsq only exists if VIRTIO_BALLOON_F_STATS_VQ is set.
+
+  free_page_vq only exists if VIRTIO_BALLOON_F_FREE_PAGE_HINT is set.
 
 \subsection{Feature bits}\label{sec:Device Types / Memory Balloon Device / Feature bits}
 \begin{description}
@@ -5019,6 +5022,10 @@ \subsection{Feature bits}\label{sec:Device Types / Memory Balloon Device / Featu
     memory statistics is present.
 \item[VIRTIO_BALLOON_F_DEFLATE_ON_OOM (2) ] Deflate balloon on
     guest out of memory condition.
+\item[ VIRTIO_BALLOON_F_FREE_PAGE_HINT(3) ] The device has support for free
+    page hinting. A virtqueue for providing hints as to what memory is
+    currently free is present. Configuration field free_page_hint_cmd_id
+    is valid.
 
 \end{description}
 
@@ -5042,13 +5049,17 @@ \subsection{Feature bits}\label{sec:Device Types / Memory Balloon Device / Featu
 VIRTIO_BALLOON_F_MUST_TELL_HOST is not negotiated.
 
 \subsection{Device configuration layout}\label{sec:Device Types / Memory Balloon Device / Device configuration layout}
-  Both fields of this configuration
-  are always available.
+  \field{num_pages} and \field{actual} are always available.
+
+  \field{free_page_hint_cmd_id} is available if
+    VIRTIO_BALLOON_F_FREE_PAGE_HINT has been negotiated and is read-only by
+    the driver.
 
 \begin{lstlisting}
 struct virtio_balloon_config {
         le32 num_pages;
         le32 actual;
+        le32 free_page_hint_cmd_id;
 };
 \end{lstlisting}
 
@@ -5072,9 +5083,15 @@ \subsection{Device Initialization}\label{sec:Device Types / Memory Balloon Devic
   \begin{enumerate}
   \item Identify the stats virtqueue.
   \item Add one empty buffer to the stats virtqueue.
-  \item DRIVER_OK is set: device operation begins.
-  \item Notify the device about the stats virtqueue buffer.
   \end{enumerate}
+
+\item If the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature bit is negotiated, the
+  free_page_vq is identified.
+
+\item DRIVER_OK is set: device operation begins.
+
+\item If the VIRTIO_BALLOON_F_STATS_VQ feature bit is negotiated, then
+  notify the device about the stats virtqueue buffer.
 \end{enumerate}
 
 \subsection{Device Operation}\label{sec:Device Types / Memory Balloon Device / Device Operation}
@@ -5345,6 +5362,105 @@ \subsubsection{Memory Statistics Tags}\label{sec:Device Types / Memory Balloon D
   allocations in the guest.
 \end{description}
 
+\subsubsection{Free Page Hinting}\label{sec:Device Types / Memory Balloon Device / Device Operation / Free Page Hinting}
+
+Free page hinting is designed to be used during migration to determine what
+pages within the guest are currently unused so that they can be skipped over
+while migrating the guest. The device will indicate that it is ready to start
+performing hinting by setting the \field{free_page_hint_cmd_id} to one of the
+non-reserved values that can be used as a command ID. The following values
+are reserved:
+
+\begin{description}
+\item[VIRTIO_BALLOON_CMD_ID_STOP (0)] Any command ID previously supplied by
+  the device is invalid. The driver should halt all hinting until a new
+  command ID is supplied.
+
+\item[VIRTIO_BALLOON_CMD_ID_DONE (1)] Any command ID previously supplied by
+  the device is invalid. The driver should halt all hinting and the hinting
+  balloon can now be deflated returning all pages to the guest.
+\end{description}
+
+A request for free page hinting proceeds as follows:
+
+\begin{enumerate}
+
+\item The driver examines the \field{free_page_hint_cmd_id} configuration field.
+  If it contains a non-reserved value then inflation of the balloon will begin.
+
+\item To supply memory to the hinting balloon:
+  \begin{enumerate}
+  \item The driver constructs an output descriptor containing the new value
+    from the \field{free_page_hint_cmd_id} configuration field and adds it to
+    the free_page_hint_vq.
+  \item The driver maps a series of pages and adds them to the
+    free_page_hint_vq as individual scatter-gather input descriptor entries.
+  \item When the driver is no longer able to fetch additional pages to add
+    to the free_page_hint_vq, it will construct an output descriptor
+    containing the command ID VIRTIO_BALLOON_CMD_ID_STOP.
+  \end{enumerate}
+
+\item A round of hinting ends either when the driver is no longer able to
+  add more pages to the balloon as described above, or when the device
+  updates \field{free_page_hint_cmd_id} configuration field contain either
+  VIRTIO_BALLOON_CMD_ID_STOP or VIRTIO_BALLOON_CMD_ID_DONE.
+
+\item The device may follow VIRTIO_BALLOON_CMD_ID_STOP with a new
+  non-reserved value for the \field{free_page_hint_cmd_id} configuration
+  field in which case it will resume supplying the hinting balloon.
+
+\item Otherwise, if the device provides VIRTIO_BALLOON_CMD_ID_DONE then
+  hinting is complete and the guest may begin to re-use pages previously
+  given to the balloon.
+
+\end{enumerate}
+
+\drivernormative{\paragraph}{Free Page Hinting}{Device Types / Memory Balloon Device / Device Operation / Free Page Hinting}
+
+Normative statements in this section apply if the
+VIRTIO_BALLOON_F_FREE_PAGE_HINT feature has been negotiated.
+
+The driver SHOULD supply pages to the hinting balloon when
+\field{free_page_hint_cmd_id} reports a value of 2 or greater.
+
+The driver MUST start hinting by providing an output descriptor
+containing the current command ID for the given block of pages.
+
+The driver SHOULD stop supplying pages to the hinting balloon when
+\field{free_page_hint_cmd_id} reports a value of VIRTIO_BALLOON_CMD_ID_STOP.
+
+If the driver is unable to supply pages, it MUST complete hinting by adding
+an output descriptor containing the command ID VIRTIO_BALLOON_CMD_ID_STOP.
+
+The driver MAY use pages from the balloon after adding them to the balloon,
+including when the device has not yet used the descriptor containing the
+hinting request.
+
+The driver SHOULD return pages for use once \field{free_page_hint_cmd_id}
+reports a value of VIRTIO_BALLOON_CMD_ID_DONE.
+
+\devicenormative{\paragraph}{Free Page Hinting}{Device Types / Memory Balloon Device / Device Operation / Free Page Hinting}
+
+Normative statements in this section apply if the
+VIRTIO_BALLOON_F_FREE_PAGE_HINT feature has been negotiated.
+
+The device MUST set \field{free_page_hint_cmd_id} to
+VIRTIO_BALLOON_CMD_ID_STOP any time that the dirty pages for the given
+guest are being recorded.
+
+The device MUST NOT reuse a command ID until it has received an output
+descriptor containing VIRTIO_BALLOON_CMD_ID_STOP from the driver.
+
+The device MUST ignore pages that are provided with a command ID that does
+not match the current value in \field{free_page_hint_cmd_id}.
+
+The device MAY modify the contents of the page in the balloon if the page
+has not been modified by the guest since the \field{free_page_hint_cmd_id}
+associated with the hint was issued by the device.
+
+The device MAY NOT modify the contents of the balloon after
+\field{free_page_hint_cmd_id} is set to VIRTIO_BALLOON_CMD_ID_DONE.
+
 \section{SCSI Host Device}\label{sec:Device Types / SCSI Host Device}
 
 The virtio SCSI host device groups together one or more virtual




[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]