OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-comment message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [PATCH V2] virtio-net: introduce admin control virtqueue


On Mon, Jan 25, 2021 at 01:52:02PM +0800, Jason Wang wrote:
> When implementing virtual devices like SR-IOV or sub-function. We're
> suffering from several issues:
> 
> - There's no management interface for management device to
>   configure features, attributes for a virtual device
> - Per virtual device control virtqueue could be very expensive as the
>   number of virtual devices could be very large
> - Virtualize per virtual device's control virtqueue could be very
>   challenge as we need the support of DMA isolation at queue level
> 
> So this patch introduces the feature of VIRTIO_NET_CTRL_ADMIN_VQ. This
> allows the device to implement a single admin control virtqueue to
> manage the features and attributes for a specific virtual device.
> 
> The idea is simple, a new virtual device id is introduced on top of
> the existing virtio_net_ctrl structure. This id is transport or device
> specific to uniquely identify a management or virtual device.
> 
> With this, we get a way of using management device (PF) to configure
> per virtual device features and attributes. And since the admin
> control virtqueue belongs to management device (PF), the DMA is
> naturally isolated at device level instead of the queue level for per
> virtual device control vq.
> 
> When the admin cvq is offered by management device and normal cvq is
> offered by virtual device. A new command class is introduced decide
> whether or not to accept commands from normal cvq for a virtual
> device.
> 
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> Changes from V1:
> - use 'virtual device' instead of 'function'
> - introuce trust command
> - clairfy that the admin cvq could be used to configure management
>   device itself
> ---
>  content.tex | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 56 insertions(+), 3 deletions(-)
> 
> diff --git a/content.tex b/content.tex
> index 620c0e2..989b4f6 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -2940,6 +2940,9 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits
>  \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
>      channel.
>  
> +\item[VIRTIO_NET_F_ADMIN_CTRL_VQ(56)] Admin control channel is
> +    available.
> +
>  \item[VIRTIO_NET_F_HASH_REPORT(57)] Device can report per-packet hash
>      value and a type of calculated hash.
>  
> @@ -3840,11 +3843,12 @@ \subsubsection{Processing of Incoming Packets}\label{sec:Device Types / Network
>  \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue}
>  
>  The driver uses the control virtqueue (if VIRTIO_NET_F_CTRL_VQ is
> -negotiated) to send commands to manipulate various features of
> -the device which would not easily map into the configuration
> -space.
> +negotiated but VIRTIO_NET_F_ADMIN_CTRL_VQ is not negotiated) to send
> +commands to manipulate various features of the device which would not
> +easily map into the configuration space.
>  
>  All commands are of the following form:
> +is not negotiated:
>  
>  \begin{lstlisting}
>  struct virtio_net_ctrl {
> @@ -3864,6 +3868,29 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  do except issue a diagnostic if \field{ack} is not
>  VIRTIO_NET_OK.
>  
> +When both VIRTIO_NET_F_CTRL_VQ and VIRTIO_NET_F_ADMIN_CTRL_VQ are
> +negotiated, the driver can use the admin control virtqueue of the
> +management device to manipulate features of individual virtual devices
> +where the control virtqueue is not easily implemented. The definition
> +of management device and virtual device is transport or device
> +specific. E.g in the case of PCI SR-IOV, the management device is
> +implemented via the physical function (PF), then the virtual device is
> +the virtual function (VF) in this case.
> +
> +All commands are of the following form:
> +
> +\begin{lstlisting}
> +struct virtio_net_admin_ctrl {
> +        u32 virtual_device_id;
> +        struct virtio_net_ctrl ctrl;
> +};
> +\end{lstlisting}
> +
> +The \field{virtual_device_id} is an unique transport or device specific
> +identifier for a virtual device or management device. E.g for the case
> +of PCI SR-IOV, it's the PCI function id. Management device MUST
> +reserve 0 for \field{virtual_device_id} to identify itself.
> +
>  \paragraph{Packet Receive Filtering}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Packet Receive Filtering}
>  \label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Setting Promiscuous Mode}%old label for latexdiff
>  
> @@ -4308,6 +4335,32 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  according to the native endian of the guest rather than
>  (necessarily when not using the legacy interface) little-endian.
>  
> +\paragraph{Setting Trust for Virtual Device}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Setting Trust for Virtual Device}
> +
> +If the VIRTIO_NET_F_ADMIN_CTRL_VQ is negotiated, the management device
> +can accept operations via the control vq from the trusted virtual
> +device.
> +
> +\begin{lstlisting}
> +#define VIRTIO_NET_ADMIN_CTRL_TRUST 0
> + #define VIRTIO_NET_ADMIN_CTRL_TRUST_ENABLE 0
> +\end{lstlisting}
> +
> +\devicenormative{\subparagraph}{Setting Trust for Virtual Device}{Device Types / Network Device / Device Operation / Control Virtqueue / Setting Trust for Virtual Device}
> +
> +If the VIRTIO_NET_F_ADMIN_CTRL_VQ has been negotiated, the device MUST
> +support VIRTIO_NET_ADMIN_CTRL_TRUST class
> +command. VIRTIO_NET_ADMIN_CTRL_TRUST_ENABLE turns trust for the
> +control virtqueue of a specific virtual device on and off. The command
> +specific data is one byte containing 0(off) or 1(on).  When trust is
> +off the device MUST fail any operations from the control virtqueue of
> +the virtual device. The management device MUST NOT trust any virtual
> +devices after reset.

Looks like trust here refers to ability to send command such as
VIRTIO_NET_CTRL_MAC and VIRTIO_NET_CTRL_VLAN.
However cvq also supports commands such as
VIRTIO_NET_CTRL_MQ which don't seem to require trust.
It looks like breaking VIRTIO_NET_CTRL_ANNOUNCE will also break
migration.

Also, consider VIRTIO_NET_F_CTRL_MAC_ADDR. Isn't it reasonable to
assume setting MAC succeeds with this being available.

Thus, an idea. How about controlling features instead?

And with that, the interface becomes generic and applicable
to all devices not just net ...

> +
> +\drivernormative{\subparagraph}{Setting Trust for Virtual Device}{Device Types / Network Device / Device Operation / Control Virtqueue / Setting Trust for Virtual Device}
> +
> +A driver SHOULD negotiate VIRTIO_NET_F_ADMIN_CTRL_VQ if the device
> +offers it.
>  \subsubsection{Legacy Interface: Framing Requirements}\label{sec:Device
>  Types / Network Device / Legacy Interface: Framing Requirements}
> -- 
> 2.25.1



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]