[RFC PATCH 1/1] Add virtio Admin Virtqueue specification

[Max Gurtovoy <mgurtovoy@nvidia.com>]

Admin virtqueues will be used to send administrative commands to
manipulate various features of the device which would not easily map
into the configuration space.

The same Admin command format will be used for all virtio devices. The
Admin command set will include 4 types of command classes:
1. The generic common class
2. The transport specific class
3. The device specific class
4. The vendor specific class

The above mechanism will enable adding various features to the virtio
specification, e.g.:
1. Format virtio-blk devices in various configurations (512B block size,
   512B + 8B T10-DIF, 4K block size, 4k + 8B T10-DIF, etc..).
2. Live migration management.
3. Encrypt/Decrypt descriptors.
4. Virtualization management.
5. Get device error logs.
6. Implement advanced vendor/device/transport specific features.
7. Run device health test.
8. More.

As virtio evolves beyond the para-virt/sw-emulated world, it's mandatory
for the specification to become flexible and allow a wider feature set.
The corrent ctrl virtq that is defined for some of the virtio devices is
device specific and wasn't designed to be a generic virtq for
admininistration.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
---
 admin-virtq.tex | 69 +++++++++++++++++++++++++++++++++++++++++++++++++
 content.tex     |  4 +++
 2 files changed, 73 insertions(+)
 create mode 100644 admin-virtq.tex

diff --git a/admin-virtq.tex b/admin-virtq.tex
new file mode 100644
index 0000000..dc1d2cd
--- /dev/null
+++ b/admin-virtq.tex
@@ -0,0 +1,69 @@
+\section{Admin Virtqueues}\label{sec:Basic Facilities of a Virtio Device / Admin Virtqueues}
+
+Admin virtqueues are used to send administrative commands to manipulate
+various features of the device which would not easily map into the
+configuration space. Admin virtqueues are also used to get advance
+device properties.
+
+Use of Admin virtqueues is negotiated by the VIRTIO_F_ADMIN_VQ
+feature bit.
+
+Admin virtqueue index may vary among different device types.
+
+All commands are of the following form:
+
+\begin{lstlisting}
+struct virtio_admin_cmd {
+        /* Device-readable part */
+        u8 class;
+        u8 command;
+        u8 command-specific-data[];
+
+        /* Device-writable part */
+        u8 command-specific-result[];
+        u8 status_type : 4;
+        u8 reserved : 4;
+        u8 status;
+};
+
+/* Status type values */
+#define VIRTIO_ADMIN_STATUS_TYPE_GENERIC               0
+#define VIRTIO_ADMIN_STATUS_TYPE_CLASS_SPECIFIC        1
+#define VIRTIO_ADMIN_STATUS_TYPE_COMMAND_SPECIFIC      2
+#define VIRTIO_ADMIN_STATUS_TYPE_TRANSPORT_SPECIFIC    3
+#define VIRTIO_ADMIN_STATUS_TYPE_DEVICE_SPECIFIC       4
+#define VIRTIO_ADMIN_STATUS_TYPE_VENDOR_SPECIFIC       5
+
+/* Generic status values */
+#define VIRTIO_ADMIN_STATUS_GENERIC_OK                     0
+#define VIRTIO_ADMIN_STATUS_GENERIC_ERR                    1
+#define VIRTIO_ADMIN_STATUS_GENERIC_INVALID_CLASS          2
+#define VIRTIO_ADMIN_STATUS_GENERIC_INVALID_COMMAND        3
+#define VIRTIO_ADMIN_STATUS_GENERIC_DATA_TRANSFER_ERR      4
+#define VIRTIO_ADMIN_STATUS_GENERIC_DEVICE_INTERNAL_ERR    5
+\end{lstlisting}
+
+The \field{class}, \field{command} and \field{command-specific-data} are
+set by the driver, and the device sets the \field{status_type}, the
+\field{status} and  the \field{command-specific-result}, if needed.
+
+The virtio Admin command class codes are divided in the following form:
+
+\begin{lstlisting}
+/* class values that are transport, device and vendor independent */
+#define VIRTIO_ADMIN_COMMON_CLASS_START    0
+#define VIRTIO_ADMIN_COMMON_CLASS_END      63
+
+/* class values that are transport specific */
+#define VIRTIO_ADMIN_TRANSPORT_CLASS_START  64
+#define VIRTIO_ADMIN_TRANSPORT_CLASS_END    127
+
+/* class values that are device specific */
+#define VIRTIO_ADMIN_DEVICE_CLASS_START     128
+#define VIRTIO_ADMIN_DEVICE_CLASS_END       191
+
+/* class values that are vendor specific */
+#define VIRTIO_ADMIN_VENDOR_CLASS_START     192
+#define VIRTIO_ADMIN_VENDOR_CLASS_END       255
+\end{lstlisting}
+
diff --git a/content.tex b/content.tex
index c266fd5..d350175 100644
--- a/content.tex
+++ b/content.tex
@@ -407,6 +407,8 @@ \section{Exporting Objects}\label{sec:Basic Facilities of a Virtio Device / Expo
 types. It is RECOMMENDED that devices generate version 4
 UUIDs as specified by \hyperref[intro:rfc4122]{[RFC4122]}.
 
+\input{admin-virtq.tex}
+
 \chapter{General Initialization And Device Operation}\label{sec:General Initialization And Device Operation}
 
 We start with an overview of device initialization, then expand on the
@@ -6671,6 +6673,8 @@ \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
   data to be provided in driver notification and the delivery method is
   transport specific.
   For more details about driver notifications over PCI see \ref{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation / Available Buffer Notifications}.
+  \item[VIRTIO_F_ADMIN_VQ(40)] This feature indicates that
+  the device supports administration virtqueue negotiation.
 
 \end{description}
 
-- 
2.21.0