[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: PING: [V3 PATCH 1/1] virtio-crypto: introduce akcipher service
Ping, can someone help take a look at this patch? thanks. > On Dec 10, 2021, at 8:53 PM, Lei He <helei.sig11@bytedance.com> wrote: > > Introduce akcipher (asymmetric key cipher) service type, several > asymmetric algorithms and relevent information: > - RSA(padding algorithm, ASN.1 schema definition) > - ECDSA(ECC algorithm) > > Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> > Signed-off-by: Lei He <helei.sig11@bytedance.com> > --- > introduction.tex | 12 +++ > virtio-crypto.tex | 317 +++++++++++++++++++++++++++++++++++++++++++++++++++++- > 2 files changed, 325 insertions(+), 4 deletions(-) > > diff --git a/introduction.tex b/introduction.tex > index 6d52717..92a6911 100644 > --- a/introduction.tex > +++ b/introduction.tex > @@ -79,6 +79,18 @@ \section{Normative References}\label{sec:Normative References} > \phantomsection\label{intro:SCMI}\textbf{[SCMI]} & > Arm System Control and Management Interface, DEN0056, > \newline\url{https://developer.arm.com/docs/den0056/c}, version C and any future revisions\\ > + \phantomsection\label{intro:rfc3447}\textbf{[RFC3447]} & > + J. Jonsson.,``Public-Key Cryptography Standards (PKCS) \#1: RSA Cryptography'', February 2003. > + \newline\url{https://www.ietf.org/rfc/rfc3447.txt}\\ > + \phantomsection\label{intro:NIST}\textbf{[FIPS186-3]} & > + National Institute of Standards and Technology (NIST), FIPS Publication 180-3: Secure Hash Standard, October 2008. > + \newline\url{https://csrc.nist.gov/csrc/media/publications/fips/186/3/archive/2009-06-25/documents/fips_186-3.pdf}\\ > + \phantomsection\label{intro:rfc6025}\textbf{[RFC6025]} & > + C.Wallace., ``ASN.1 Translation'', October 2010. > + \newline\url{https://www.ietf.org/rfc/rfc6025.txt}\\ > + \phantomsection\label{intro:rfc3279}\textbf{[RFC3279]} & > + W.Polk., ``Algorithms and Identifiers for the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile'', April 2002. > + \newline\url{https://www.ietf.org/rfc/rfc3279.txt}\\ > > \end{longtable} > > diff --git a/virtio-crypto.tex b/virtio-crypto.tex > index 74746f9..256c144 100644 > --- a/virtio-crypto.tex > +++ b/virtio-crypto.tex > @@ -2,7 +2,7 @@ \section{Crypto Device}\label{sec:Device Types / Crypto Device} > > The virtio crypto device is a virtual cryptography device as well as a > virtual cryptographic accelerator. The virtio crypto device provides the > -following crypto services: CIPHER, MAC, HASH, and AEAD. Virtio crypto > +following crypto services: CIPHER, MAC, HASH, AEAD and AKCIPHER. Virtio crypto > devices have a single control queue and at least one data queue. Crypto > operation requests are placed into a data queue, and serviced by the > device. Some crypto operation requests are only valid in the context of a > @@ -39,6 +39,8 @@ \subsection{Feature bits}\label{sec:Device Types / Crypto Device / Feature bits} > supported by the MAC service. > \item VIRTIO_CRYPTO_F_AEAD_STATELESS_MODE (4) stateless mode requests are > supported by the AEAD service. > +\item VIRTIO_CRYPTO_F_AKCIPHER_STATELESS_MODE (5) stateless mode requests are > + supported by the AKCIPHER service. > \end{description} > > > @@ -52,6 +54,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Crypto Device > \item[VIRTIO_CRYPTO_F_HASH_STATELESS_MODE] Requires VIRTIO_CRYPTO_F_REVISION_1. > \item[VIRTIO_CRYPTO_F_MAC_STATELESS_MODE] Requires VIRTIO_CRYPTO_F_REVISION_1. > \item[VIRTIO_CRYPTO_F_AEAD_STATELESS_MODE] Requires VIRTIO_CRYPTO_F_REVISION_1. > +\item[VIRTIO_CRYPTO_F_AKCIPHER_STATELESS_MODE] Requires VIRTIO_CRYPTO_F_REVISION_1. > \end{description} > > \subsection{Supported crypto services}\label{sec:Device Types / Crypto Device / Supported crypto services} > @@ -59,7 +62,7 @@ \subsection{Supported crypto services}\label{sec:Device Types / Crypto Device / > The following crypto services are defined: > > \begin{lstlisting} > -/* CIPHER service */ > +/* CIPHER (Symmetric Key Cipher) service */ > #define VIRTIO_CRYPTO_SERVICE_CIPHER 0 > /* HASH service */ > #define VIRTIO_CRYPTO_SERVICE_HASH 1 > @@ -67,6 +70,8 @@ \subsection{Supported crypto services}\label{sec:Device Types / Crypto Device / > #define VIRTIO_CRYPTO_SERVICE_MAC 2 > /* AEAD (Authenticated Encryption with Associated Data) service */ > #define VIRTIO_CRYPTO_SERVICE_AEAD 3 > +/* AKCIPHER (Asymmetric Key Cipher) service */ > +#define VIRTIO_CRYPTO_SERVICE_AKCIPHER 4 > \end{lstlisting} > > The above constants designate bits used to indicate the which of crypto services are > @@ -181,6 +186,24 @@ \subsubsection{AEAD services}\label{sec:Device Types / Crypto Device / Supported > operation requests, see \ref{sec:Device Types / Crypto Device / Device Operation / Control Virtqueue / Session operation}. > \end{enumerate} > > +\subsubsection{AKCIPHER services}\label{sec: Device Types / Crypto Device / Supported crypto services / AKCIPHER services} > + > +The following AKCIPHER algorithms are defined: > +\begin{lstlisting} > +#define VIRTIO_CRYPTO_NO_AKCIPHER 0 > +#define VIRTIO_CRYPTO_AKCIPHER_RSA 1 > +#define VIRTIO_CRYPTO_AKCIPHER_ECDSA 2 > +\end{lstlisting} > + > +The above constants have two usages: > +\begin{enumerate} > +\item As bit numbers, used to tell the driver which AKCIPHER algorithms > +are supported by the device, see \ref{sec:Device Types / Crypto Device / Device configuration layout}. > +\item As values, used to designate the algorithm in asymmetric crypto operation requests, > +see \ref{sec:Device Types / Crypto Device / Device Operation / Control Virtqueue / Session operation}. > +\end{enumerate} > + > + > \subsection{Device configuration layout}\label{sec:Device Types / Crypto Device / Device configuration layout} > > Crypto device configuration uses the following layout structure: > @@ -204,6 +227,7 @@ \subsection{Device configuration layout}\label{sec:Device Types / Crypto Device > le32 reserved; > /* Maximum size of each crypto request's content in bytes */ > le64 max_size; > + le32 akcipher_algo; > }; > \end{lstlisting} > > @@ -241,6 +265,7 @@ \subsection{Device configuration layout}\label{sec:Device Types / Crypto Device > > \item [\field{max_size}] is the maximum size of the variable-length parameters of > data operation of each crypto request's content supported by the device. > +\item [\field{akcipher_algo}] AKCIPHER algorithms bit 0-31, see \ref{sec: Device Types / Crypto Device / Supported crypto services / AKCIPHER services}. > \end{description} > > \begin{note} > @@ -323,6 +348,7 @@ \subsubsection{Operation Status}\label{sec:Device Types / Crypto Device / Device > VIRTIO_CRYPTO_NOTSUPP = 3, > VIRTIO_CRYPTO_INVSESS = 4, > VIRTIO_CRYPTO_NOSPC = 5, > + VIRTIO_CRYPTO_KEY_REJECTED = 6, > VIRTIO_CRYPTO_MAX > }; > \end{lstlisting} > @@ -334,6 +360,7 @@ \subsubsection{Operation Status}\label{sec:Device Types / Crypto Device / Device > \item VIRTIO_CRYPTO_INVSESS: invalid session ID when executing crypto operations. > \item VIRTIO_CRYPTO_NOSPC: no free session ID (only when the VIRTIO_CRYPTO_F_REVISION_1 > feature bit is negotiated). > +\item VIRTIO_CRYPTO_KEY_REJECTED: signature verification failed (only when AKCIPHER verification). > \item VIRTIO_CRYPTO_ERR: any failure not mentioned above occurs. > \end{itemize*} > > @@ -364,6 +391,10 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Crypto Device / Devic > VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) > #define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ > VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) > +#define VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x04) > +#define VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCDE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x05) > le32 opcode; > /* algo should be service-specific algorithms */ > le32 algo; > @@ -427,6 +458,11 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Crypto Device / Devic > VIRTIO_CRYPTO_F_REVISION_1 is negotiated and struct virtio_crypto_aead_create_session_flf is > padded to 56 bytes if NOT negotiated, and \field{op_vlf} is struct > virtio_crypto_aead_create_session_vlf. > +\item If the opcode (in \field{header}) is VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION > + then \field{op_flf} is struct virtio_crypto_akcipher_create_session_flf if > + VIRTIO_CRYPTO_F_REVISION_1 is negotiated and struct virtio_crypto_akcipher_create_session_flf is > + padded to 56 bytes if NOT negotiated, and \field{op_vlf} is struct > + virtio_crypto_akcipher_create_session_vlf. > \item If the opcode (in \field{header}) is VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION > or VIRTIO_CRYPTO_HASH_DESTROY_SESSION or VIRTIO_CRYPTO_MAC_DESTROY_SESSION or > VIRTIO_CRYPTO_AEAD_DESTROY_SESSION then \field{op_flf} is struct > @@ -690,12 +726,137 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Crypto Device / Devic > The length of \field{key} is specified in \field{key_len} in struct > virtio_crypto_aead_create_session_flf. > > +\subparagraph{Session operation: AKCIPHER session}\label{sec:Device Types / Crypto Device / Device > +Operation / Control Virtqueue / Session operation / Session operation: AKCIPHER session} > + > +Due to the complexity of asymmetric key algorithms, different algorithms > +require different parameters. The following data structures are used as > +supplementary parameters to describe the asymmetric algorithm sessions. > + > +For the RSA algorithm, the extra parameters are as follows: > +\begin{lstlisting} > +struct virtio_crypto_rsa_session_para { > +#define VIRTIO_CRYPTO_RSA_RAW_PADDING 0 > +#define VIRTIO_CRYPTO_RSA_PKCS1_PADDING 1 > + le32 padding_algo; > + > +#define VIRTIO_CRYPTO_RSA_NO_HASH 0 > +#define VIRTIO_CRYPTO_RSA_MD2 1 > +#define VIRTIO_CRYPTO_RSA_MD3 2 > +#define VIRTIO_CRYPTO_RSA_MD4 3 > +#define VIRTIO_CRYPTO_RSA_MD5 4 > +#define VIRTIO_CRYPTO_RSA_SHA1 5 > +#define VIRTIO_CRYPTO_RSA_SHA256 6 > +#define VIRTIO_CRYPTO_RSA_SHA384 7 > +#define VIRTIO_CRYPTO_RSA_SHA512 8 > +#define VIRTIO_CRYPTO_RSA_SHA224 9 > + le32 hash_algo; > +}; > +\end{lstlisting} > + > +\field{padding_algo} specifies the padding method used by RSA sessions. > +\begin{itemize*} > +\item If VIRTIO_CRYPTO_RSA_RAW_PADDING is specified, 1) \field{hash_algo} > +is ignored, 2) ciphertext and plaintext MUST be padded with leading zeros, > +3) and RSA sessions with VIRTIO_CRYPTO_RSA_RAW_PADDING MUST not be used > +for verification and signing operations. > +\item If VIRTIO_CRYPTO_RSA_PKCS1_PADDING is specified, EMSA-PKCS1-v1_5 padding method > +is used(see \hyperref[intro:rfc3447]{PKCS\#1}), \field{hash_algo} specifies how the > +digest of the data passed to RSA sessions is calculated when verifying and signing. > +It only affects the padding algorithm and is ignored during encryption and decryption. > +\end{itemize*} > + > +The ECC algorithms such as the ECDSA algorithm, cannot use custom curves, only the > +following known curves can be used(see \hyperref[intro:NIST]{NIST-recommended curves}) > + > +\begin{lstlisting} > +#define VIRTIO_CRYPTO_CURVE_UNKNOWN 0 > +#define VIRTIO_CRYPTO_CURVE_NIST_P192 1 > +#define VIRTIO_CRYPTO_CURVE_NIST_P224 2 > +#define VIRTIO_CRYPTO_CURVE_NIST_P256 3 > +#define VIRTIO_CRYPTO_CURVE_NIST_P384 4 > +#define VIRTIO_CRYPTO_CURVE_NIST_P521 5 > +\end{lstlisting} > + > +For the ECDSA algorithm, the extra parameters are as follows: > +\begin{lstlisting} > +struct virtio_crypto_ecdsa_session_para { > + /* See VIRTIO_CRYPTO_CURVE_* above */ > + le32 curve_id; > +}; > +\end{lstlisting} > + > +The fixed-length and the variable-length parameters of AKCIPHER session requests are as follows: > +\begin{lstlisting} > +struct virtio_crypto_akcipher_create_session_flf { > + /* Device read only portion */ > + > + /* See VIRTIO_CRYPTO_AKCIPHER_* above */ > + le32 algo; > +#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC 1 > +#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE 2 > + le32 key_type; > + /* length of key */ > + le32 key_len; > + > +#define VIRTIO_CRYPTO_AKCIPHER_SESS_ALGO_SPEC_HDR_SIZE 44 > + u8 algo_flf[VIRTIO_CRYPTO_AKCIPHER_SESS_ALGO_SPEC_HDR_SIZE]; > +}; > + > +struct virtio_crypto_akcipher_create_session_vlf { > + /* Device read only portion */ > + u8 key[key_len]; > +}; > +\end{lstlisting} > + > +\field{algo} decides the type used by \field{algo_flf}. > +\field{algo_flf} is fixed to 44 bytes and MUST contains of be one the > +following structures: > +\begin{itemize*} > +\item struct virtio_crypto_rsa_session_para > +\item struct virtio_crypto_ecdsa_session_para > +\end{itemize*} > + > +The length of \field{key} is specified in \field{key_len} in the struct > +virtio_crypto_akcipher_create_session_flf. > + > +If the key of an asymmetric algorithm contains multiple fields, for example, > +the RSA key pairs, they MUST be described using the > +ASN.1 structure and MUST be DER encoded (see \hyperref[intro:rfc6025]{rfc6025}). > +If the key of an asymmetric algorithm only contains an integer field, for example, > +the ECDSA private key, then MUST be encoded with I2OSP primitives described in > +\hyperref[intro:rfc3447]{PKCS\#1}. > + > +The schema of RSA keys is described with the RSAPrivateKey and RSAPublicKey structure defined in > +\hyperref[intro:rfc3447]{PKCS\#1}. > + > +\begin{lstlisting} > +RsaPrivateKey ::= SEQUENCE { > + version INTEGER > + modulus INTEGER > + publicExponent INTEGER > + privateExponent INTEGER > + prime1 INTEGER > + prime2 INTEGER > + exponent1 INTEGER > + exponent1 INTEGER > + coefficient INTEGER > +} > + > +RsaPublicKey ::= SEQUENCE { > + modulus INTEGER > + publicExponent INTEGER > +} > +\end{lstlisting} > + > +The length of \field{key} is specified in \field{key_len} in > +struct virtio_crypto_akcipher_create_session_flf. > > \drivernormative{\subparagraph}{Session operation: create session}{Device Types / Crypto Device / Device > Operation / Control Virtqueue / Session operation / Session operation: create session} > > \begin{itemize*} > -\item The driver MUST set the \field{opcode} field based on service type: CIPHER, HASH, MAC, or AEAD. > +\item The driver MUST set the \field{opcode} field based on service type: CIPHER, HASH, MAC, AEAD or AKCIPHER. > \item The driver MUST set the control general header, the opcode specific header, > the opcode specific extra parameters and the opcode specific outcome buffer in turn. > See \ref{sec:Device Types / Crypto Device / Device Operation / Control Virtqueue}. > @@ -726,7 +887,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Crypto Device / Devic > Operation / Control Virtqueue / Session operation / Session operation: destroy session} > > \begin{itemize*} > -\item The driver MUST set the \field{opcode} field based on service type: CIPHER, HASH, MAC, or AEAD. > +\item The driver MUST set the \field{opcode} field based on service type: CIPHER, HASH, MAC, AEAD or AKCIPHER. > \item The driver MUST set the \field{session_id} to a valid value assigned by the device > when the session was created. > \end{itemize*} > @@ -764,6 +925,14 @@ \subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device / Device O > VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00) > #define VIRTIO_CRYPTO_AEAD_DECRYPT \ > VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01) > +#define VIRTIO_CRYPTO_AKCIPHER_ENCRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x00) > +#define VIRTIO_CRYPTO_AKCIPHER_DECRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x01) > +#define VIRTIO_CRYPTO_AKCIPHER_SIGN \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02) > +#define VIRTIO_CRYPTO_AKCIPHER_VERIFY \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03) > le32 opcode; > /* algo should be service-specific algorithms */ > le32 algo; > @@ -857,6 +1026,17 @@ \subsubsection{Data Virtqueue}\label{sec:Device Types / Crypto Device / Device O > and struct virtio_crypto_aead_data_flf is padded to 48 bytes if NOT negotiated, > and \field{op_vlf} is struct virtio_crypto_aead_data_vlf. > \end{itemize*} > +\item If the opcode (in \field{header}) is VIRTIO_CRYPTO_AKCIPHER_ENCRYPT, VIRTIO_CRYPTO_AKCIPHER_DECRYPT, > + VIRTIO_CRYPTO_AKCIPHER_SIGN or VIRTIO_CRYPTO_AKCIPHER_VERIFY then: > + \begin{itemize*} > + \item If VIRTIO_CRYPTO_F_AKCIPHER_STATELESS_MODE is negotiated, \field{op_flf} is > + struct virtio_crypto_akcipher_data_flf_statless, and \field{op_vlf} is struct > + virtio_crypto_akcipher_data_vlf_stateless. > + \item If VIRTIO_CRYPTO_F_AKCIPHER_STATELESS_MODE is NOT negotiated, \field{op_flf} > + is struct virtio_crypto_akcipher_data_flf if VIRTIO_CRYPTO_F_REVISION_1 is negotiated > + and struct virtio_crypto_akcipher_data_flf is padded to 48 bytes if NOT negotiated, > + and \field{op_vlf} is struct virtio_crypto_akcipher_data_vlf. > + \end{itemize*} > \end{itemize*} > > \field{inhdr} is a unified input header that used to return the status of > @@ -1533,3 +1713,132 @@ \subsubsection{AEAD Service Operation}\label{sec:Device Types / Crypto Device / > \item VIRTIO_CRYPTO_ERR if any failure not mentioned above occurs. > \end{itemize*} > \end{itemize*} > + > +\subsubsection{AKCIPHER Service Operation}\label{sec:Device Types / Crypto Device / Device Operation / AKCIPHER Service Operation} > + > +Session mode AKCIPHER requests are as follows: > + > +\begin{lstlisting} > +struct virtio_crypto_akcipher_data_flf { > + /* length of source data */ > + le32 src_data_len; > + /* length of dst data */ > + le32 dst_data_len; > +}; > + > +struct virtio_crypto_akcipher_data_vlf { > + /* Device read only portion */ > + /* Source data */ > + u8 src_data[src_data_len]; > + > + /* Device write only portion */ > + /* Pointer to output data */ > + u8 dst_data[dst_data_len]; > +}; > +\end{lstlisting} > + > +Each data request uses the virtio_crypto_akcipher_flf structure and the virtio_crypto_akcipher_data_vlf > +structure to store information used to run the AKCIPHER operations. > + > +For encryption, decryption, and signing: > +\field{src_data} is the source data that will be processed, note that for signing operations, > +src_data stores the data to be signed, which usually is the digest of some data rather than the > +data itself. > +\field{src_data_len} is the length of source data. > +\field{dst_result} is the result data and \field{dst_data_len} is the length of it. > + > +For verification: > +\field{src_data_len} refers to the length of the signature, and \field{dst_data_len} refers to > +the length of signed data, where the signed data is usually the digest of some data. > +\field{src_data} is spliced by the signature and the signed data, the src_data with the lower > +address stores the signature, and the higher address stores the signed data. > +\field{dst_data} is always empty for verification. > + > +Different algorithms have different signature formats. > +For the RSA algorithm, the result is determined by the padding algorithm specified by > +\field{padding_algo} in structure virtio_crypto_rsa_session_para. > + > +For the ECDSA algorithm, the signature is composed of the following > +ASN.1 structure(see \hyperref[intro:rfc3279]{RFC3279}) > +and MUST be DER encoded. > +\begin{lstlisting} > +Ecdsa-Sig-Value ::= SEQUENCE { > + r INTEGER, > + s INTEGER > +} > +\end{lstlisting} > + > +Stateless mode AKCIPHER service requests are as follows: > +\begin{lstlisting} > +struct virtio_crypto_akcipher_data_flf_stateless { > + struct { > + /* See VIRTIO_CYRPTO_AKCIPHER* above */ > + le32 algo; > + /* See VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_* above */ > + le32 key_type; > + /* length of key */ > + le32 key_len; > + > + /* algothrim specific parameters described above */ > + union { > + struct virtio_crypto_rsa_session_para rsa; > + struct virtio_crypto_ecdsa_session_para ecdsa; > + } u; > + } sess_para; > + > + /* length of source data */ > + le32 src_data_len; > + /* length of destination data */ > + le32 dst_data_len; > +}; > + > +struct virtio_crypto_akcipher_data_vlf_stateless { > + /* Device read only portion */ > + u8 akcipher_key[key_len]; > + > + /* Source data */ > + u8 src_data[src_data_len]; > + > + /* Device write only portion */ > + u8 dst_data[dst_data_len]; > +}; > +\end{lstlisting} > + > +In stateless mode, the format of key and signature, the meaning of src_data and dst_data, are all the same > +with session mode. > + > +\drivernormative{\paragraph}{AKCIPHER Service Operation}{Device Types / Crypto Device / Device Operation / AKCIPHER Service Operation} > + > +\begin{itemize*} > +\item If the driver uses the session mode, then the driver MUST set > + \field{session_id} in struct virtio_crypto_op_header to a valid > + value assigned by the device when the session was created. > +\item If the VIRTIO_CRYPTO_F_AKCIPHER_STATELESS_MODE feature bit is negotiated, 1) if the > + driver uses the stateless mode, then the driver MUST set the \field{flag} field in > + struct virtio_crypto_op_header to ZERO and MUST set the fields in struct > + virtio_crypto_akcipher_flf_stateless.sess_para, 2) if the driver uses the session > + mode, then the driver MUST set the \field{flag} field in struct virtio_crypto_op_header > + to VIRTIO_CRYPTO_FLAG_SESSION_MODE. > +\item The driver MUST set the \field{opcode} field in struct virtio_crypto_op_header > + to one of VIRTIO_CRYPTO_AKCIPHER_ENCRYPT, VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION, > + VIRTIO_CRYPTO_AKCIPHER_SIGN, and VIRTIO_CRYPTO_AKCIPHER_VERIFY. > +\end{itemize*} > + > +\devicenormative{\paragraph}{AKCIPHER Service Operation}{Device Types / Crypto Device / Device Operation / AKCIPHER Service Operation} > + > +\begin{itemize*} > +\item If the VIRTIO_CRYPTO_F_AKCIPHER_STATELESS_MODE feature bit is negotiated, the > + device MUST parse the virtio_crypto_akcipher_data_vlf_stateless based on the \field{opcode} > + field in general header. > +\item The device MUST copy the result of cryptographic operation in the dst_data[]. > +\item The device MUST set the \field{status} field in struct virtio_crypto_inhdr to > + one of the following values of enum VIRTIO_CRYPTO_STATUS: > +\begin{itemize*} > +\item VIRTIO_CRYPTO_OK if the operation success. > +\item VIRTIO_CRYPTO_NOTSUPP if the requested algorithm or operation is unsupported. > +\item VIRTIO_CRYPTO_BADMSG if the verification result is incorrect. > +\item VIRTIO_CRYPTO_INVSESS if the session ID invalid when in session mode. > +\item VIRTIO_CRYPTO_KEY_REJECTED if the signature verification failed. > +\item VIRTIO_CRYPTO_ERR if any failure not mentioned above occurs. > +\end{itemize*} > +\end{itemize*} > -- > 2.11.0 >
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]