OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [PATCH 2/6] virtio-balloon: speed up inflate/deflate process


On Mon, Jun 13, 2016 at 05:47:09PM +0800, Liang Li wrote:
> The implementation of the current virtio-balloon is not very efficient,
> Bellow is test result of time spends on inflating the balloon to 3GB of
> a 4GB idle guest:
> 
> a. allocating pages (6.5%, 103ms)
> b. sending PFNs to host (68.3%, 787ms)
> c. address translation (6.1%, 96ms)
> d. madvise (19%, 300ms)
> 
> It takes about 1577ms for the whole inflating process to complete. The
> test shows that the bottle neck is the stage b and stage d.
> 
> If using a bitmap to send the page info instead of the PFNs, we can
> reduce the overhead in stage b quite a lot. Furthermore, it's possible
> to do the address translation and the madvise with a bulk of pages,
> instead of the current page per page way, so the overhead of stage c
> and stage d can also be reduced a lot.
> 
> This patch is the kernel side implementation which is intended to speed
> up the inflating & deflating process by adding a new feature to the
> virtio-balloon device. And now, inflating the balloon to 3GB of a 4GB
> idle guest only takes 200ms, it's about 8 times as fast as before.
> 
> TODO: optimize stage a by allocating/freeing a chunk of pages instead
> of a single page at a time.
> 
> Signed-off-by: Liang Li <liang.z.li@intel.com>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
> Cc: Amit Shah <amit.shah@redhat.com>

Causes kbuild warnings

> ---
>  drivers/virtio/virtio_balloon.c     | 164 +++++++++++++++++++++++++++++++-----
>  include/uapi/linux/virtio_balloon.h |   1 +
>  2 files changed, 144 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index 8d649a2..1fa601b 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -40,11 +40,19 @@
>  #define VIRTIO_BALLOON_ARRAY_PFNS_MAX 256
>  #define OOM_VBALLOON_DEFAULT_PAGES 256
>  #define VIRTBALLOON_OOM_NOTIFY_PRIORITY 80
> +#define VIRTIO_BALLOON_PFNS_LIMIT ((2 * (1ULL << 30)) >> PAGE_SHIFT) /* 2GB */

2<< 30  is 2G but that is not a useful comment.
pls explain what is the reason for this selection.

>  
>  static int oom_pages = OOM_VBALLOON_DEFAULT_PAGES;
>  module_param(oom_pages, int, S_IRUSR | S_IWUSR);
>  MODULE_PARM_DESC(oom_pages, "pages to free on OOM");
>  
> +struct balloon_bmap_hdr {
> +	__virtio32 id;
> +	__virtio32 page_shift;
> +	__virtio64 start_pfn;
> +	__virtio64 bmap_len;
> +};
> +

Put this in an uapi header please.

>  struct virtio_balloon {
>  	struct virtio_device *vdev;
>  	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
> @@ -62,6 +70,11 @@ struct virtio_balloon {
>  
>  	/* Number of balloon pages we've told the Host we're not using. */
>  	unsigned int num_pages;
> +	/* Bitmap and length used to tell the host the pages */
> +	unsigned long *page_bitmap;
> +	unsigned long bmap_len;
> +	/* Used to record the processed pfn range */
> +	unsigned long min_pfn, max_pfn, start_pfn, end_pfn;
>  	/*
>  	 * The pages we've told the Host we're not using are enqueued
>  	 * at vb_dev_info->pages list.
> @@ -105,15 +118,51 @@ static void balloon_ack(struct virtqueue *vq)
>  	wake_up(&vb->acked);
>  }
>  
> +static inline void init_pfn_range(struct virtio_balloon *vb)
> +{
> +	vb->min_pfn = (1UL << 48);

Where does this value come from? Do you want ULONG_MAX?
This does not fit in long on 32 bit systems.


> +	vb->max_pfn = 0;
> +}
> +
> +static inline void update_pfn_range(struct virtio_balloon *vb,
> +				 struct page *page)
> +{
> +	unsigned long balloon_pfn = page_to_balloon_pfn(page);
> +
> +	if (balloon_pfn < vb->min_pfn)
> +		vb->min_pfn = balloon_pfn;
> +	if (balloon_pfn > vb->max_pfn)
> +		vb->max_pfn = balloon_pfn;
> +}
> +
>  static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
>  {
> -	struct scatterlist sg;
>  	unsigned int len;
>  
> -	sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
> +	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_PAGE_BITMAP)) {
> +		struct balloon_bmap_hdr hdr;

why not init fields here?

> +		unsigned long bmap_len;

and here

> +		struct scatterlist sg[2];
> +
> +		hdr.id = cpu_to_virtio32(vb->vdev, 0);
> +		hdr.page_shift = cpu_to_virtio32(vb->vdev, PAGE_SHIFT);
> +		hdr.start_pfn = cpu_to_virtio64(vb->vdev, vb->start_pfn);
> +		bmap_len = min(vb->bmap_len,
> +				(vb->end_pfn - vb->start_pfn) / BITS_PER_BYTE);
> +		hdr.bmap_len = cpu_to_virtio64(vb->vdev, bmap_len);
> +		sg_init_table(sg, 2);
> +		sg_set_buf(&sg[0], &hdr, sizeof(hdr));
> +		sg_set_buf(&sg[1], vb->page_bitmap, bmap_len);
> +		virtqueue_add_outbuf(vq, sg, 2, vb, GFP_KERNEL);

might fail if queue size < 2. validate queue size and clear
VIRTIO_BALLOON_F_PAGE_BITMAP?

Alternatively, and I think preferably,
use first struct balloon_bmap_hdr bytes in the buffer
to pass the header to host.


> +	} else {
> +		struct scatterlist sg;
>  
> -	/* We should always be able to add one buffer to an empty queue. */
> -	virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
> +		sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
> +		/* We should always be able to add one buffer to an
> +		* empty queue.
> +		*/
> +		virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
> +	}
>  	virtqueue_kick(vq);
>  
>  	/* When host has read buffer, this completes via balloon_ack */
> @@ -133,13 +182,50 @@ static void set_page_pfns(struct virtio_balloon *vb,
>  					  page_to_balloon_pfn(page) + i);
>  }
>  
> -static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
> +static void set_page_bitmap(struct virtio_balloon *vb,
> +			 struct list_head *pages, struct virtqueue *vq)
> +{
> +	unsigned long pfn;
> +	struct page *page, *next;
> +	bool find;

find -> found

> +
> +	vb->min_pfn = rounddown(vb->min_pfn, BITS_PER_LONG);
> +	vb->max_pfn = roundup(vb->max_pfn, BITS_PER_LONG);
> +	for (pfn = vb->min_pfn; pfn < vb->max_pfn;
> +			pfn += VIRTIO_BALLOON_PFNS_LIMIT) {
> +		vb->start_pfn = pfn;
> +		vb->end_pfn = pfn;
> +		memset(vb->page_bitmap, 0, vb->bmap_len);
> +		find = false;
> +		list_for_each_entry_safe(page, next, pages, lru) {

Why _safe?

> +			unsigned long balloon_pfn = page_to_balloon_pfn(page);
> +
> +			if (balloon_pfn < pfn ||
> +				 balloon_pfn >= pfn + VIRTIO_BALLOON_PFNS_LIMIT)
> +				continue;
> +			set_bit(balloon_pfn - pfn, vb->page_bitmap);
> +			if (balloon_pfn > vb->end_pfn)
> +				vb->end_pfn = balloon_pfn;
> +			find = true;

maybe remove page from list? this way we won't go over same entry
multiple times ...

> +		}
> +		if (find) {
> +			vb->end_pfn = roundup(vb->end_pfn, BITS_PER_LONG);
> +			tell_host(vb, vq);
> +		}
> +	}
> +}
> +
> +static unsigned int fill_balloon(struct virtio_balloon *vb, size_t num,
> +				 bool use_bmap)
>  {
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	unsigned num_allocated_pages;
>  
> -	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	if (use_bmap)
> +		init_pfn_range(vb);
> +	else
> +		/* We can only do one array worth at a time. */
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -154,7 +240,10 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  			msleep(200);
>  			break;
>  		}
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (use_bmap)
> +			update_pfn_range(vb, page);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
>  		vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
>  		if (!virtio_has_feature(vb->vdev,
>  					VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> @@ -163,8 +252,13 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  
>  	num_allocated_pages = vb->num_pfns;
>  	/* Did we get any? */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->inflate_vq);
> +	if (vb->num_pfns != 0) {
> +		if (use_bmap)
> +			set_page_bitmap(vb, &vb_dev_info->pages,
> +					 vb->inflate_vq);

don't we need pages_lock if we access vb_dev_info->pages?

> +		else
> +			tell_host(vb, vb->inflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	return num_allocated_pages;
> @@ -184,15 +278,19 @@ static void release_pages_balloon(struct virtio_balloon *vb,
>  	}
>  }
>  
> -static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
> +static unsigned int leak_balloon(struct virtio_balloon *vb, size_t num,
> +				bool use_bmap)
>  {
>  	unsigned num_freed_pages;
>  	struct page *page;
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	LIST_HEAD(pages);
>  
> -	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	if (use_bmap)
> +		init_pfn_range(vb);
> +	else
> +		/* We can only do one array worth at a time. */
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -200,7 +298,10 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  		page = balloon_page_dequeue(vb_dev_info);
>  		if (!page)
>  			break;
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (use_bmap)
> +			update_pfn_range(vb, page);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
>  		list_add(&page->lru, &pages);
>  		vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
>  	}
> @@ -211,9 +312,14 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	 * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
>  	 * is true, we *have* to do it in this order
>  	 */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->deflate_vq);
> -	release_pages_balloon(vb, &pages);
> +	if (vb->num_pfns != 0) {
> +		if (use_bmap)
> +			set_page_bitmap(vb, &pages, vb->deflate_vq);
> +		else
> +			tell_host(vb, vb->deflate_vq);
> +
> +		release_pages_balloon(vb, &pages);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  	return num_freed_pages;
>  }
> @@ -347,13 +453,15 @@ static int virtballoon_oom_notify(struct notifier_block *self,
>  	struct virtio_balloon *vb;
>  	unsigned long *freed;
>  	unsigned num_freed_pages;
> +	bool use_bmap;
>  
>  	vb = container_of(self, struct virtio_balloon, nb);
>  	if (!virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
>  		return NOTIFY_OK;
>  
>  	freed = parm;
> -	num_freed_pages = leak_balloon(vb, oom_pages);
> +	use_bmap = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_PAGE_BITMAP);
> +	num_freed_pages = leak_balloon(vb, oom_pages, use_bmap);
>  	update_balloon_size(vb);
>  	*freed += num_freed_pages;
>  
> @@ -373,15 +481,17 @@ static void update_balloon_size_func(struct work_struct *work)
>  {
>  	struct virtio_balloon *vb;
>  	s64 diff;
> +	bool use_bmap;
>  
>  	vb = container_of(work, struct virtio_balloon,
>  			  update_balloon_size_work);
> +	use_bmap = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_PAGE_BITMAP);
>  	diff = towards_target(vb);
>  
>  	if (diff > 0)
> -		diff -= fill_balloon(vb, diff);
> +		diff -= fill_balloon(vb, diff, use_bmap);
>  	else if (diff < 0)
> -		diff += leak_balloon(vb, -diff);
> +		diff += leak_balloon(vb, -diff, use_bmap);
>  	update_balloon_size(vb);
>  
>  	if (diff)
> @@ -508,6 +618,13 @@ static int virtballoon_probe(struct virtio_device *vdev)
>  	spin_lock_init(&vb->stop_update_lock);
>  	vb->stop_update = false;
>  	vb->num_pages = 0;
> +	vb->bmap_len = ALIGN(VIRTIO_BALLOON_PFNS_LIMIT, BITS_PER_LONG) /
> +		 BITS_PER_BYTE + 2 * sizeof(unsigned long);
> +	vb->page_bitmap = kzalloc(vb->bmap_len, GFP_KERNEL);
> +	if (!vb->page_bitmap) {
> +		err = -ENOMEM;
> +		goto out;
> +	}

How about we clear the bitmap feature on this failure?

>  	mutex_init(&vb->balloon_lock);
>  	init_waitqueue_head(&vb->acked);
>  	vb->vdev = vdev;
> @@ -541,9 +658,12 @@ out:
>  
>  static void remove_common(struct virtio_balloon *vb)
>  {
> +	bool use_bmap;
> +
> +	use_bmap = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_PAGE_BITMAP);
>  	/* There might be pages left in the balloon: free them. */
>  	while (vb->num_pages)
> -		leak_balloon(vb, vb->num_pages);
> +		leak_balloon(vb, vb->num_pages, use_bmap);
>  	update_balloon_size(vb);
>  
>  	/* Now we reset the device so we can clean up the queues. */
> @@ -565,6 +685,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
>  	cancel_work_sync(&vb->update_balloon_stats_work);
>  
>  	remove_common(vb);
> +	kfree(vb->page_bitmap);
>  	kfree(vb);
>  }
>  
> @@ -603,6 +724,7 @@ static unsigned int features[] = {
>  	VIRTIO_BALLOON_F_MUST_TELL_HOST,
>  	VIRTIO_BALLOON_F_STATS_VQ,
>  	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> +	VIRTIO_BALLOON_F_PAGE_BITMAP,
>  };
>  
>  static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..f78fa47 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,6 +34,7 @@
>  #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
>  #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
>  #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_PAGE_BITMAP	3 /* Send page info with bitmap */
>  
>  /* Size of a PFN in the balloon interface. */
>  #define VIRTIO_BALLOON_PFN_SHIFT 12
> -- 
> 1.9.1


[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]