[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [Qemu-devel] [PATCH v5] virtio-crypto: Add virtio crypto device specification
On Wed, Jul 27, 2016 at 06:08:23PM +0800, Gonglei wrote:
> The virtio crypto device is a virtual crypto device (ie. hardware
> crypto accelerator card). The virtio crypto device can provide
> five crypto services: CIPHER, MAC, HASH, AEAD, KDF, ASYM, PRIMITIVE.
>
> In this patch, CIPHER, MAC, HASH, AEAD services are introduced.
>
> CC: Michael S. Tsirkin <mst@redhat.com>
> CC: Cornelia Huck <cornelia.huck@de.ibm.com>
> CC: Stefan Hajnoczi <stefanha@redhat.com>
> CC: Lingli Deng <denglingli@chinamobile.com>
> CC: Jani Kokkonen <Jani.Kokkonen@huawei.com>
> CC: Ola Liljedahl <Ola.Liljedahl@arm.com>
> CC: Varun Sethi <Varun.Sethi@freescale.com>
> CC: Zeng Xin <xin.zeng@intel.com>
> CC: Keating Brian <brian.a.keating@intel.com>
> CC: Ma Liang J <liang.j.ma@intel.com>
> CC: Griffin John <john.griffin@intel.com>
> CC: Hanweidong <hanweidong@huawei.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
> ---
> This is the specification (version 5) about a new virtio crypto device.
> This version is a big reconstruction based on Xin's comments,
> thanks a lot.
>
> If you have any comments, please let me know, thanks :)
>
> Changes from v4:
> - introduce crypto services into virtio crypto device. The services
> currently defined are CIPHER, MAC, HASH, AEAD, KDF, ASYM, PRIMITIVE.
> - define a unified crypto request format that is consisted of
> general header + service specific request, Where 'general header' is for all
> crypto request, 'service specific request' is composed of
> operation parameter + input data + output data in generally.
> operation parameter is algorithm-specific parameters,
> input data is the data should be operated ,
> output data is the "operation result + result buffer".
> - redefine the algorithms and structure based on above crypto services.
> - rearrange the title and subtitle
> - Only support CIPHER, MAC, HASH and AEAD crypto services, and Xin will
> focus KDF, ASYM and PRIMITIVE services.
> - Some other corresponding fixes.
> - Make a formal patch using tex type.
>
> Changes from v3:
> - Don't use enum is the spec but macros in specific structures. [Michael & Stefan]
> - Add two complete structures for session creation and closing, so that
> the spec is clear on how to lay out the request. [Stefan]
> - Definite the crypto operation request with assigned structure, in this way,
> each data request only occupies *one entry* of the Vring descriptor table,
> which *improves* the *throughput* of data transferring.
>
> Changes from v2:
> - Reserve virtio device ID 20 for crypto device. [Cornelia]
> - Drop all feature bits, those capabilities are offered by the device all the time. [Stefan & Cornelia]
> - Add a new section 1.4.2 for driver requirements. [Stefan]
> - Use definite type definition instead of enum type in some structure. [Stefan]
> - Add virtio_crypto_cipher_alg definition. [Stefan]
> - Add a "Device requirements" section as using MUST. [Stefan]
> - Some grammar nits fixes and typo fixes. [Stefan & Cornelia]
> - Add one VIRTIO_CRYPTO_S_STARTED status for the driver as the flag of virtio-crypto device started and can work now.
>
> Great thanks for Stefan and Cornelia!
>
> Changes from v1:
> - Drop the feature bit definition for each algorithm, and using config space instead [Cornelia]
> - Add multiqueue support and add corresponding feature bit
> - Update Encryption process and header definition
> - Add session operation process and add corresponding header description
> - Other better description in order to fit for virtio spec [Michael]
> - Some other trivial fixes.
OK I will let people who understand crypto comment on this.
Down the road before we release this we'll need to link confirmance clauses
from confirmance section. Can be a patch on top, no big deal.
> ---
> content.tex | 2 +
> virtio-crypto.tex | 792 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 794 insertions(+)
> create mode 100644 virtio-crypto.tex
>
> diff --git a/content.tex b/content.tex
> index 4b45678..ab75f78 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -5750,6 +5750,8 @@ descriptor for the \field{sense_len}, \field{residual},
> \field{status_qualifier}, \field{status}, \field{response} and
> \field{sense} fields.
>
> +\input{virtio-crypto.tex}
> +
> \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
>
> Currently there are three device-independent feature bits defined:
Generally we keep it all in a single file. But ok, let's
experiment with this split layout and see whether it
makes things easier or harder. We can always squash it later.
> diff --git a/virtio-crypto.tex b/virtio-crypto.tex
> new file mode 100644
> index 0000000..0918f36
> --- /dev/null
> +++ b/virtio-crypto.tex
> @@ -0,0 +1,792 @@
> +\section{Crypto Device}\label{sec:Device Types / Crypto Device}
> +
> +The virtio crypto device is a virtual crypto device (ie. hardware
> +crypto accelerator card). The encryption and decryption requests of
> +are placed in the data queue, and handled by the real hardware crypto
> +accelerators finally. The second queue is the control queue, which
> +is used to create or destroy session for symmetric algorithms, and
> +to control some advanced features in the future. The virtio crypto
> +device can provide seven crypto services: CIPHER, MAC, HASH, AEAD,
> +KDF, ASYM, PRIMITIVE.
> +
> +\subsection{Device ID}\label{sec:Device Types / Crypto Device / Device ID}
> +
> +20
> +
> +\subsection{Virtqueues}\label{sec:Device Types / Crypto Device / Virtqueues}
> +
> +\begin{description}
> +\item[0] dataq1
> +\item[\ldots]
> +\item[N-1] dataqN
> +\item[N] controlq
> +\end{description}
> +
> +N is set by \field{max_dataqueues} (\field{max_dataqueues} >= 1).
> +
> +\subsection{Feature bits}\label{sec:Device Types / Crypto Device / Feature bits}
> + None currently defined
> +
> +\subsection{Device configuration layout}\label{sec:Device Types / Crypto Device / Device configuration layout}
> +
> +Thirteen driver-read-only configuration fields are currently defined.
> +
> +\begin{lstlisting}
> +struct virtio_crypto_config {
> + le32 version;
> + le16 status;
> + le16 max_dataqueues;
> + le32 crypto_services;
> + /* detailed algorithms mask */
> + le32 cipher_algo_l;
> + le32 cipher_algo_h;
> + le32 hash_algo;
> + le32 mac_algo_l;
> + le32 mac_algo_h;
> + le32 asym_algo;
> + le32 kdf_algo;
> + le32 aead_algo;
> + le32 primitive_algo;
> +};
> +\end{lstlisting}
> +
> +The first driver-read-only field, \field{version} specifies the virtio crypto??s
> +version, which is reserved for back-compatibility in future.It??s currently
> +defined for the version field:
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_VERSION_1 (1)
> +\end{lstlisting}
> +
We have feature bits so I think this should not be necessary.
> +One read-only bit (for the device) is currently defined for the \field{status}
> +field: VIRTIO_CRYPTO_S_HW_READY. One read-only bit (for the driver)
> +is currently defined for the status field: VIRTIO_CRYPTO_S_STARTED.
what does for the device/for the driver mean here?
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_S_HW_READY (1 << 0)
so this is a way to tell guest "I am not ready yet, do not use"?
> +#define VIRTIO_CRYPTO_S_STARTED (1 << 1)
does not look like anyone uses bit 1.
> +\end{lstlisting}
What does each of these mean?
> +
> +The following driver-read-only field, \field{max_dataqueuess} specifies the
> +maximum number of data virtqueues (dataq1\ldots dataqN). The crypto_services
> +shows the crypto services the virtio crypto supports. The service currently
> +defined are:
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_NO_SERVICE (0) /* cipher services */
> +#define VIRTIO_CRYPTO_SERVICE_CIPHER (1) /* cipher services */
> +#define VIRTIO_CRYPTO_SERVICE_HASH (2) /* hash service */
> +#define VIRTIO_CRYPTO_SERVICE_MAC (3) /* MAC (Message Authentication Codes) service */
> +#define VIRTIO_CRYPTO_SERVICE_AEAD (4) /* AEAD(Authenticated Encryption with Associated Data) service */
> +\end{lstlisting}
> +
> +The last driver-read-only fields specify detailed algorithms mask which
> +the device offered for corresponding service. The below CIPHER algorithms
> +are defined currently:
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_NO_CIPHER 0
> +#define VIRTIO_CRYPTO_CIPHER_ARC4 1
> +#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2
> +#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3
> +#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4
> +#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5
> +#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6
> +#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7
> +#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8
> +#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9
> +#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10
> +#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11
> +#define VIRTIO_CRYPTO_CIPHER_AES_F8 12
> +#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13
> +#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14
> +\end{lstlisting}
> +
> +The below HASH algorithms are defined currently:
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_NO_HASH 0
> +#define VIRTIO_CRYPTO_HASH_MD5 1
> +#define VIRTIO_CRYPTO_HASH_SHA1 2
> +#define VIRTIO_CRYPTO_HASH_SHA_224 3
> +#define VIRTIO_CRYPTO_HASH_SHA_256 4
> +#define VIRTIO_CRYPTO_HASH_SHA_384 5
> +#define VIRTIO_CRYPTO_HASH_SHA_512 6
> +#define VIRTIO_CRYPTO_HASH_SHA3_224 7
> +#define VIRTIO_CRYPTO_HASH_SHA3_256 8
> +#define VIRTIO_CRYPTO_HASH_SHA3_384 9
> +#define VIRTIO_CRYPTO_HASH_SHA3_512 10
> +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11
> +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12
> +\end{lstlisting}
> +
> +The below MAC algorithms are defined currently:
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_NO_MAC 0
> +#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1
> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2
> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3
> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4
> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5
> +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6
> +#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25
> +#define VIRTIO_CRYPTO_MAC_CMAC_AES 26
> +#define VIRTIO_CRYPTO_MAC_CMAC_KASUMI_F9 27
> +#define VIRTIO_CRYPTO_MAC_CMAC_SNOW3G_UIA2 28
> +#define VIRTIO_CRYPTO_MAC_GMAC_AES 41
> +#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42
> +#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49
> +#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50
> +#define VIRTIO_CRYPTO_MAC_XCBC_AES 53
> +\end{lstlisting}
> +
> +The below AEAD algorithms are defined currently:
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_NO_AEAD 0
> +#define VIRTIO_CRYPTO_AEAD_GCM 1
> +#define VIRTIO_CRYPTO_AEAD_CCM 2
> +#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3
> +\end{lstlisting}
> +
> +\subsubsection{Device Requirements: Device configuration layout}\label{sec:Device Types / Crypto Device / Device configuration layout / Device Requirements: Device configuration layout}
> +
> +\begin{itemize*}
> +\item The device MUST set \field{version} in version filed.
> +\item The device MUST set \field{max_dataqueues} to between 1 and 65535 inclusive.
> +\item The device SHOULD set \field{status} according to the status of the hardware-backed implementation.
does it always go not ready->ready and never back?
> +\item The device MUST set \field{crypto_services} according to the crypto services which the device offered.
> +\item The device MUST set detailed algorithms mask according to crypto_services field.
> +\end{itemize*}
> +
> +\subsubsection{Driver Requirements: Device configuration layout}\label{sec:Device Types / Crypto Device / Device configuration layout / Driver Requirements: Device configuration layout}
> +
> +\begin{itemize*}
> +\item The driver MUST read the ready \field{status} from the bottom bit of status
why not use a name instead of "bottom bit of"?
> to
> + check whether the hardware-backed implementation is ready or not.
and if not ready then what is legal to do and what isn't?
better say what it must not do until device is ready.
> +\item The driver MAY read \field{max_dataqueues} field to discover how many data queues the device supports.
> +\item The driver MUST read \field{crypto_services} field to discover which services the device is able to offer.
> +\item The driver MUST read detail algorithms field according to crypto_services field.
> +\end{itemize*}
> +
> +\subsection{Device Initialization}{Device Types / Crypto Device / Device Initialization}
> +
> +The driver SHOULD perform a typical initialization routine like so:
> +
> +\begin{enumerate}
> +\item Identify and initialize data virtqueue, up to \field{max_dataqueues}.
> +\item Identify the control virtqueue.
> +\item Identify the ready \field{status} of hardware-backend comes from the bottom bit of status.
> +\item Read the supported crypto services from bits of \field{crypto_servies}.
> +\item Read the supported algorithms according to \field{crypto_services} field.
> +\end{enumerate}
> +
> +\subsection{Device Operation}\label{sec:Device Types / Crypto Device / Device Operation}
> +
> +Packets can be transmitted by placing them in both the controlq and dataq.
> +The packet are consisted of general header and services specific request,
> +Where 'general header' is for all crypto request, 'service specific request'
> +is composed of operation parameter + input data + output data in generally.
> +Operation parameters are algorithm-specific parameters, input data is the
> +data should be operated , output data is the "operation result + result buffer".
> +The general header of controlq:
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_OPCODE(service, op) ((service << 8) | (op))
> +
> +struct virtio_crypto_ctrl_header{
> +#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02)
> +#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x03)
> +#define VIRTIO_CRYPTO_HASH_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02)
> +#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03)
> +#define VIRTIO_CRYPTO_MAC_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02)
> +#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03)
> +#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02)
> +#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03)
> + le32 opcode;
> + /* algo should be service-specific algorithms */
> + le32 algo;
> + /* control flag to control the request */
> + u8 flag;
> + /* data virtqeueu id */
> + le16 queue_id;
> +};
> +\end{lstlisting}
> +
> +The general header of dataq:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_op_header {
> +#define VIRTIO_CRYPTO_CIPHER_ENCRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x00)
> +#define VIRTIO_CRYPTO_CIPHER_DECRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x01)
> +#define VIRTIO_CRYPTO_HASH VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x00)
> +#define VIRTIO_CRYPTO_MAC VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00)
> +#define VIRTIO_CRYPTO_AEAD_ENCRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00)
> +#define VIRTIO_CRYPTO_AEAD_DECRYPT VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01)
> + le32 opcode;
> + /* algo should be service-specific algorithms */
> + le32 algo;
> + /* control flag to control the request */
> + u8 flag;
> + /* data virtqeueu id */
> + le16 queue_id;
> + /* session_id should be service-specific algorithms */
> + le64 session_id;
> +};
> +\end{lstlisting}
> +
> +\subsubsection{Control virtqueue}\label{sec:Device Types / Crypto Device / Device Operation / Control virtqueue}
> +
> +The driver uses the control virtqueue to send control commands to the
> +device which finish the non-data plane operations, such as session
> +operations (see \ref{sec:Device Types / Crypto Device / Device Operation / Session operation}).
> +The packet of controlq:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_op_ctrl_req {
> + struct virtio_crypto_ctrl_header header;
> +
> + union {
> + struct virtio_crypto_sym_create_session_req sym_create_session;
> + struct virtio_crypto_hash_create_session_req hash_create_session;
> + struct virtio_crypto_mac_create_session_req mac_create_session;
> + struct virtio_crypto_aead_create_session_req aead_create_session;
> + struct virtio_crypto_destroy_session_req sym_destroy_session;
> + } u;
does this means it is always the max size? or can any size be used
as long as the struct fits in there?
If second, then better split it I think.
> +};
> +\end{lstlisting}
> +
> +The header is the general header, the union is algorithm-specific type,
> +which is set by the driver. All the properties in the union will be shown as follow.
> +
> +\subsubsection{Session operation}\label{sec:Device Types / Crypto Device / Device Operation / Session operation}
> +
> +The symmetric algorithms have the concept of sessions. A session is a
> +handle which describes the cryptographic parameters to be applied to
> +a number of buffers. The data within a session handle includes the following:
> +
> +\begin{enumerate}
> +\item The operation (cipher, hash/mac or both, and if both, the order in
> + which the algorithms should be applied).
> +\item The cipher setup data, including the cipher algorithm and mode,
> + the key and its length, and the direction (encrypt or decrypt).
> +\item Use VIRTIO_Crypto_CMD_RESOURCE_FLUSH
why mixed case?
> to flush the updated resource
> + to the display.
display?
> +\begin{itemize*}
> +\item Authenticated mode can refer to MAC, which requires that the key and
> + its length are also specified.
> +\item For nested mode, the inner and outer prefix data and length are specified,
> + as well as the outer hash algorithm.
> +\end{itemize*}
> +\end{enumerate}
> +
> +\paragraph{Session operation: HASH session}\label{sec:Device Types / Crypto Device / Device Operation / Session operation / Session operation: HASH session}
> +
> +The packet of HASH session is:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_sym_session_input {
> + u8 status;
> + le64 session_id;
> +};
> +
> +struct virtio_crypto_hash_session_para {
> + /* See VIRTIO_CRYPTO_HASH_* above*/
> + le32 algo;
> + /* hash result length */
> + le32 hash_result_len;
> +};
> +struct virtio_crypto_hash_create_session_req {
> + struct virtio_crypto_hash_session_para parameter;
> + /*
> + * in header guest physical address, See struct virtio_crypto_sym_session_input
> + * above
> + */
> + le64 inhdr_addr;
> +};
> +\end{lstlisting}
> +
> +\paragraph{Session operation: MAC session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: MAC session}
> +
> +The packet of MAC session is:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_mac_session_para {
> + /* See VIRTIO_CRYPTO_MAC_* above */
> + le32 algo;
> + /* hash result length */
> + le32 hash_result_len;
> + /* length of authenticated key */
> + le32 auth_key_len;
> +};
> +struct virtio_crypto_mac_create_session_req {
> + struct virtio_crypto_mac_session_para parameter;
> + /*
> + * in header guest physical address, See struct virtio_crypto_sym_session_input
> + * above
> + */
> + le64 inhdr_addr;
> +};
> +\end{lstlisting}
> +
> +\paragraph{Session operation: Symmetric algorithms session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: Symmetric algorithms session}
> +
> +The symmetric session include both ciphers (CIPHER service) and chain
> +algorithms (chain cipher and hash/mac). The packet of symmetric session is:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_cipher_session_para {
> +/* See VIRTIO_CRYPTO_CIPHER* above */
> + le32 algo;
> + /* length of key */
> + le32 keylen;
> + /* encrypt or decrypt */
> + u8 op;
> +};
> +struct virtio_crypto_sym_create_session_req {
> +/* No operation */
> +#define VIRTIO_CRYPTO_SYM_OP_NONE 0
> +/* Cipher only operation on the data */
> +#define VIRTIO_CRYPTO_SYM_OP_CIPHER 1
> +/* Chain any cipher with any hash or mac operation. The order
> + depends on the value of alg_chain_order param */
> +#define VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING 2
> + u8 op_type;
> +
> + union {
> + struct virtio_crypto_cipher_session_para cipher_param;
> + struct virtio_crypto_alg_chain_param {
> +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1
> +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2
> + u8 alg_chain_order;
> +/* Plain hash */
> +#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1
> +/* Authenticated hash (mac) */
> +#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2
> +/* Nested hash */
> +#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3
> + u8 hash_mode;
> + struct virtio_crypto_cipher_session_para cipher_param;
> + union {
> + struct virtio_crypto_hash_session_para hash_param;
> + struct virtio_crypto_mac_session_para mac_param;
> + } u;
> + } chain;
> + } sym;
> +
> + /*
> + * in header guest physical address, See struct virtio_crypto_sym_session_input
> + * above
> + */
> + le64 inhdr_addr;
> +};
> +\end{lstlisting}
> +
> +\paragraph{Session operation: AEAD session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: AEAD session}
> +
> +The packet of AEAD session is:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_aead_session_para {
> + /* See VIRTIO_CRYPTO_AEAD_* above*/
> + u8 algo;
> + /* length of key */
> + le32 key_len;
> + /* digest result length */
> + le32 digest_result_len;
> + /* The length of the additional authenticated data (AAD) in bytes */
> + le32 aad_len;
> + /* encrypt or decrypt */
> + u8 op;
> +};
> +struct virtio_crypto_aead_create_session_req {
> + struct virtio_crypto_aead_session_para parameter;
> + /*
> + * in header guest physical address, See struct virtio_crypto_sym_session_input
> + * above
> + */
> + le64 inhdr_addr;
> +};
> +\end{lstlisting}
> +
> +\paragraph{Session operation: create session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: create session}
> +
> +A request of creating a session including the following information:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_op_ctrl_req {
> + struct virtio_crypto_ctrl_header header;
> +
> + union {
> + struct virtio_crypto_sym_create_session_req sym_create_session;
> + struct virtio_crypto_hash_create_session_req hash_create_session;
> + struct virtio_crypto_mac_create_session_req mac_create_session;
> + struct virtio_crypto_aead_create_session_req aead_create_session;
> + struct virtio_crypto_destroy_session_req sym_destroy_session;
> + } u;
> +};
> +\end{lstlisting}
> +
> +\subparagraph{Driver Requirements: Session operation: create session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: create session / Driver Requirements: Session operation: create session}
> +
> +The driver MUST set the control general header and corresponding property
> +of union in structure virtio_crypto_op_ctrl_req. See \ref{sec:Device Types / Crypto Device / Device Operation}.
> +Take the example of MAC service, the driver MUST set VIRTIO_CRYPTO_MAC_CREATE_SESSION
> +for \field{opcode} field in struct virtio_crypto_op_ctrl_req, and set the \field{queue_id}
> +to show dataq used.
> +
> +\subparagraph{Device Requirements: Session operation: create session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: create session / Device Requirements: Session operation: create session}
> +
> +The device MUST return a session identifier to the driver when the device
> +finishes the processing of session creation. The session creation request
> +MUST end by a GPA of tailer: \field{inhdr_addr} field in struct virtio_crypto_*_create_session_req
> +of each crypto service. The \field{inhdr_addr} field point to the below structure:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_sym_session_input {
> + u8 status;
> + le64 session_id;
> +};
> +\end{lstlisting}
> +
> +Both status and session_id are written by the device: either VIRTIO_CRYPTO_OP_OK for success,
> +VIRTIO_CRYPTO_OP_ERR for creation failed or device error, VIRTIO_CRYPTO_OP_NOTSUPP for not support.
What is not supported?
> +
> +\begin{lstlisting}
> +#define VIRTIO_CRYPTO_OP_OK 0
> +#define VIRTIO_CRYPTO_OP_ERR 1
> +#define VIRTIO_CRYPTO_OP_BADMSG 2
> +#define VIRTIO_CRYPTO_OP_NOTSUPP 3
> +\end{lstlisting}
> +
> +\paragraph{Session operation: destroy session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: destroy session}
> +
> +A request which destroy a session including the following information:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_destroy_session_req {
> + le64 session_id; /* OUT parameter */
> + u8 status; /* IN parameter */
> +};
> +struct virtio_crypto_op_ctrl_req {
> + struct virtio_crypto_ctrl_header header;
> +
> + union {
> + struct virtio_crypto_sym_create_session_req sym_create_session;
> + struct virtio_crypto_hash_create_session_req hash_create_session;
> + struct virtio_crypto_mac_create_session_req mac_create_session;
> + struct virtio_crypto_aead_create_session_req aead_create_session;
> + struct virtio_crypto_destroy_session_req sym_destroy_session;
> + } u;
> +};
> +\end{lstlisting}
> +
> +\subparagraph{Driver Requirements: Session operation: destroy session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: destroy session / Driver Requirements: Session operation: destroy session}
> +
> +The driver MUST set the control general header and corresponding property
> +of union in struct virtio_crypto_op_ctrl_req. See \ref{sec:Device Types / Crypto Device / Device Operation}.
> +Take the example of MAC service, the driver MUST set VIRTIO_CRYPTO_MAC_DESTROY_SESSION
> +for \field{opcode} field in struct virtio_crypto_op_ctrl_req, and set the \field{queue_id} shows dataq used.
> +The driver MUST set the \field{session_id} which MUST be a valid value which assigned by the
> +device when a session was created.
> +
> +\subparagraph{Device Requirements: Session operation: destroy session}\label{sec:Device Types / Crypto Device / Device
> +Operation / Session operation / Session operation: destroy session / Device Requirements: Session operation: destroy session}
> +
> +Status is written by the device: either VIRTIO_CRYPTO_OP_OK for success, VIRTIO_CRYPTO_OP_ERR for failure or device error.
> +
> +\subsubsection{Crypto operation}\label{sec:Device Types / Crypto Device / Device Operation / Crypto operation}
> +
> +The driver uses the dataq to finish the data plane operations (such as crypto operation).
> +The packet of dataq:
> +
> +\begin{lstlisting}
> +struct virtio_crypto_op_data_req {
> + struct virtio_crypto_op_header header;
> +
> + union {
> + struct virtio_crypto_sym_data_req sym_req;
> + struct virtio_crypto_hash_data_req hash_req;
> + struct virtio_crypto_mac_data_req mac_req;
> + struct virtio_crypto_aead_data_req aead_req;
> + } u;
> +};
> +\end{lstlisting}
> +
> +The header is the general header, the union is algorithm-specific type,
> +which are set by the driver. All the properties in the union will be shown as follow.
> +
> +\paragraph{Crypto operation: HASH operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: HASH operation}
> +
> +\begin{lstlisting}
> +struct virtio_crypto_sym_crypt_op_inhdr {
> + u8 status;
> +};
> +
> +struct virtio_crypto_hash_para {
> + /* length of source data */
> + le32 src_data_len;
> +};
> +
> +struct virtio_crypto_hash_input {
> + le64 digest_result_addr; /* digest result guest physical address */
> + /*
> + * in header guest physical address, See struct virtio_crypto_sym_crypt_op_inhdr
> + * above
> + */
> + le64 inhdr_addr;
> +};
> +
> +struct virtio_crypto_hash_output {
> + le64 src_data_addr; /* source data guest physical address */
> +};
> +
> +struct virtio_crypto_hash_data_req {
> + struct virtio_crypto_hash_para parameter;
> + struct virtio_crypto_hash_input idata;
> + struct virtio_crypto_hash_output odata;
> +};
> +\end{lstlisting}
> +
> +Both input and output parameters store the guest physical address (GPA) only so
> +that each data operation request only occupies one entry of the Vring descriptor
> +table, which improves the throughput of data transferring for HASH crypto service.
> +The struct virtio_crypto_hash_para store the corresponding parameters, such as
> +\field{src_data_len}. The length and GPA can determine the specific content in
> +the guest memory.
> +
> +\subparagraph{Driver Requirements: Crypto operation: HASH operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: HASH operation / Driver Requirements: Crypto operation: HASH operation}
> +
> +The driver MUST set the \field{opcode}, \field{session_id} in struct virtio_crypto_op_header.
> +The \field{opcode} is set to VIRTIO_CRYPTO_HASH, \field{session_id} MUST be a valid value
> +which assigned by the device when a session was created.
> +The driver SHOULD set the \field{queue_id} field to show dataq used in struct virtio_crypto_op_header.
> +The driver MUST fill out all fields in struct virtio_crypto_hash_data_req, including \field{parameter},
> +\field{idata} and \field{odata} sub structures.
> +
> +Note: \field{inhdr_addr} is a GPA pointed the struct virtio_crypto_sym_crypt_op_inhdr
> +which allocated by the driver.
> +
> +\subparagraph{Device Requirements: Crypto operation: HASH operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: HASH operation / Device Requirements: Crypto operation: HASH operation}
> +
> +The device MUST copy the result of hash operation recorded by \field{digest_result_addr}
> +filed in struct virtio_crypto_hash_input.
> +The device MUST set the status recorded by \field{inhdr_addr field} in strut virtio_crypto_hash_input
> +which point struct virtio_crypto_sym_crypt_op_inhdr: either VIRTIO_CRYPTO_OP_OK for success,
> +VIRTIO_CRYPTO_OP_ERR for creation failed or device error, VIRTIO_CRYPTO_OP_NOTSUPP for not support.
> +
> +\paragraph{Crypto operation: MAC operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: MAC operation}
> +
> +\begin{lstlisting}
> +struct virtio_crypto_mac_para {
> + struct virtio_crypto_hash_para hash_para;
> +};
> +
> +struct virtio_crypto_mac_input {
> + struct virtio_crypto_hash_input hash_input;
> +};
> +
> +struct virtio_crypto_mac_output {
> + struct virtio_crypto_hash_output hash_output;
> +};
> +
> +struct virtio_crypto_mac_data_req {
> + struct virtio_crypto_mac_para parameter;
> + struct virtio_crypto_mac_input idata;
> + struct virtio_crypto_mac_output odata;
> +};
> +\end{lstlisting}
> +
> +Both input and output parameters store the guest physical address (GPA) only so
> +that each data operation request only occupies one entry of the Vring descriptor
> +table, which improves the throughput of data transferring for MAC crypto service.
> +The struct virtio_crypto_mac_para store the corresponding parameters, such as
> +\field{src_data_len}. The length and GPA can determine the specific content in the guest memory.
> +
> +\subparagraph{Driver Requirements: Crypto operation: MAC operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: MAC operation / Driver Requirements: Crypto operation: MAC operation}
> +
> +Refer to the hash operation.
> +The driver MUST set the \field{opcode} field to VIRTIO_CRYPTO_MAC.
> +
> +\subparagraph{Device Requirements: Crypto operation: MAC operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: MAC operation / Device Requirements: Crypto operation: MAC operation}
> +
> +Refer to the hash operation.
> +
> +\paragraph{Crypto operation: Symmetric algorithms operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: Symmetric algorithms operation}
> +
> +\begin{lstlisting}
> +struct virtio_crypto_cipher_para {
> + le32 iv_len;
> + /* length of source data */
> + le32 src_data_len;
> + /* length of dst data */
> + le32 dst_data_len;
> +};
> +struct virtio_crypto_cipher_input {
> + le64 dst_data_addr; /* destination data guest physical address */
> + /*
> + * in header guest physical address, See struct virtio_crypto_sym_crypt_op_inhdr
> + * above
> + */
> + le64 inhdr_addr;
> +};
> +
> +struct virtio_crypto_cipher_output {
> + le64 iv_addr; /* iv guest physical address */
> + le64 src_data_addr; /* source data guest physical address */
> +};
> +struct virtio_crypto_cipher_data_req {
> + struct virtio_crypto_cipher_para parameter;
> + struct virtio_crypto_cipher_input idata;
> + struct virtio_crypto_cipher_output odata;
> +};
> +struct virtio_crypto_sym_data_req {
> + struct virtio_crypto_cipher_data_req cipher_req;
> + union {
> + struct virtio_crypto_hash_data_req hash_req;
> + struct virtio_crypto_mac_data_req mac_req;
> + } u;
> +};
> +\end{lstlisting}
> +
> +Both input and output parameters store the guest physical address (GPA) only so that
> +each data operation request only occupies one entry of the Vring descriptor table,
> +which improves the throughput of data transferring for symmetric algorithms.
> +The struct virtio_crypto_cipher_para store the corresponding parameters,
> +such as \field{src_data_len}. The length and GPA can determine the specific content in the guest memory.
> +
> +\subparagraph{Driver Requirements: Crypto operation: Symmetric algorithms encryption}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: Symmetric algorithms operation / Driver Requirements: Crypto operation: Symmetric algorithms encryption}
> +
> +Refer to the hash operation.
> +The driver MUST set the opcode field to VIRTIO_CRYPTO_CIPHER_ENCRYPT.
> +The driver MUST fill out the fields in struct virtio_crypto_sym_data_req according to
> +the operation type of the session. For example, if the created session is based
> +on VIRTIO_CRYPTO_SYM_OP_CIPHER, that means the driver just SHOULD fill out fields
> +of struct virtio_crypto_cipher_data_req in struct virtio_crypto_sym_data_req.
> +If the created session is VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING type and
> +VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH mode, that means the driver SHOULD fill out
> +fields of both struct virtio_crypto_cipher_data_req and struct
> +virtio_crypto_mac_data_req mac_req in struct virtio_crypto_sym_data_req.
> +
> +\subparagraph{Device Requirements: Crypto operation: Symmetric algorithms encryption}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: Symmetric algorithms operation / Device Requirements: Crypto operation: Symmetric algorithms encryption}
> +
> +The device MUST parse the virtio_crypto_sym_data_req according to the session_id in general header.
> +For example, The device SHOULD only parsed fields of struct virtio_crypto_cipher_data_req in
> +struct virtio_crypto_sym_data_req if the created session is VIRTIO_CRYPTO_SYM_OP_CIPHER type.
> +The driver SHOULD parse fields of both struct virtio_crypto_cipher_data_req and struct
> +virtio_crypto_mac_data_req mac_req in struct virtio_crypto_sym_data_req if the created
> +session is VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING operation type and VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH mode.
> +
> +The device MUST copy the result of encryption operation recorded by \filed{dst_data_addr} filed in struct virtio_crypto_cipher_input in plain cipher mode.
> +The device MUST copy the result of hash operation recorded by \filed{digest_result_addr} filed in struct virtio_crypto_hash_input in chain hash/mac mode.
> +The device MUST set the status recorded by \filed{inhdr_addr} field in strut virtio_crypto_cipher_input which point
> +struct virtio_crypto_sym_crypt_op_inhdr: either VIRTIO_CRYPTO_OP_OK for success, VIRTIO_CRYPTO_OP_ERR for creation
> +failed or device error, VIRTIO_CRYPTO_OP_NOTSUPP for not support.
> +
> +\subparagraph{Device Requirements: Crypto operation: Steps of encryption}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: Symmetric algorithms operation / Device Requirements: Crypto operation: Steps of encryption}
> +
> +Step1: Create a session:
> +\begin{enumerate}
> +\item The driver fills out the context message, including algorithm name, key, keylen etc;
> +\item The driver sends a context message to the backend device by controlq;
> +\item The device creates a session using the message transmitted by controlq;
> +\item Return the session id to the driver.
> +\end{enumerate}
> +
> +Step2: Execute the detail encryption operation:
> +\begin{enumerate}
> +\item The driver fills out the encrypt requests;
> +\item Put the requests into dataq and kick the virtqueue;
> +\item The device executes the encryption operation according the requests?? arguments;
> +\item The device returns the encryption result to the driver by dataq;
> +\item The driver callback handle the result and over.
> +\end{enumerate}
> +
> +Note: the driver MAY support both synchronous and asynchronous encryption. Then the performance
> +is poor in synchronous operation because frequent context switching and virtualization overhead.
> +The driver SHOULD by preference use asynchronous encryption.
> +
> +\paragraph{Crypto operation: AEAD operation}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: AEAD operation}
> +
> +\begin{lstlisting}
> +struct virtio_crypto_aead_para {
> + le32 iv_len;
> + /* length of additional auth data */
> + le32 aad_len;
> + /* length of source data */
> + le32 src_data_len;
> + /* length of dst data */
> + le32 dst_data_len;
> +};
> +
> +struct virtio_crypto_aead_input {
> + le64 dst_data_addr; /* destination data guest physical address */
> + le64 digest_result_addr; /* digest result guest physical address */
> + /*
> + * in header guest physical address, See struct virtio_crypto_sym_crypt_op_inhdr
> + * above
> + */
> + le64 inhdr_addr;
> +};
> +
> +struct virtio_crypto_aead_output {
> + le64 iv_addr; /* iv guest physical address */
> + le64 src_data_addr; /* source data guest physical address */
> + le64 add_data_addr; /* additional auth data guest physical address */
> +};
> +struct virtio_crypto_aead_data_req {
> + struct virtio_crypto_aead_para parameter;
> + struct virtio_crypto_aead_input idata;
> + struct virtio_crypto_aead_output odata;
> +};
> +\end{lstlisting}
> +
> +Both input and output parameters store the guest physical address (GPA) only so that
> +each data operation request only occupies one entry of the Vring descriptor table,
> +which improves the throughput of data transferring for AEAD crypto service. The
> +struct virtio_crypto_aead_para store the corresponding parameters, such as \field{src_data_len}.
> +The length and GPA can determine the specific content in the guest memory.
> +
> +\subparagraph{Driver Requirements: Crypto operation: AEAD encryption}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: AEAD operation / Driver Requirements: Crypto operation: AEAD encryption}
> +
> +Refer to the symmetric algorithms encryption operation.
> +The driver MUST set the \field{opcode} field to VIRTIO_CRYPTO_AEAD_ENCRYPT.
> +
> +\subparagraph{Device Requirements: Crypto operation: AEAD encryption}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: AEAD operation / Device Requirements: Crypto operation: AEAD encryption}
> +
> +Refer to the symmetric algorithms encryption operation.
> +
> +\subparagraph{Driver Requirements: Crypto operation: AEAD decryption}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: AEAD operation / Driver Requirements: Crypto operation: AEAD decryption}
> +
> +Refer to the symmetric algorithms encryption operation.
> +The driver MUST set the \field{opcode} field to VIRTIO_CRYPTO_AEAD_DECRYPT.
> +
> +\subparagraph{Device Requirements: Crypto operation: AEAD decryption}\label{sec:Device Types / Crypto Device / Device
> +Operation / Crypto operation / Crypto operation: AEAD operation / Device Requirements: Crypto operation: AEAD decryption}
> +
> +The device MUST verify and return the verify result to the driver.
> +If the verify result is not correct, VIRTIO_CRYPTO_OP_BADMSG (bad message)
> +MUST be returned the driver.
> --
> 1.7.12.4
>
>
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]