[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [RFC PATCH v3 1/1] virtio crypto device specification: asymmetric crypto service
This patch introduces asymmetric crypto service into virtio crypto
device spec. The asymmetric crypto service can be referred as signature,
verification, encryption, decryption, key generation and key exchange.
This patch depends on virtio crypto device spec patch:
http://lists.gnu.org/archive/html/qemu-devel/2017-01/msg00291.html
Please help to review, thanks!
Changes since v2:
- Update some sections according to the update of virtio crypto device
spec v15.
- Fix minor spelling mistakes
- Remove trail spaces in the spec
Changes since v1:
- Remove virtio_crypto_buf to be consistent with other virtio devices'
buf representation. [Lei]
- Use "MUST" instead of "SHOULD" in some places. [Lei]
Changes since v0:
- Use devicenormative/drivernormative instead of self-defined
device/driver label. [Lei]
- Change the error code of verification to general virtio_crypto
error code. [Lei]
- Use macro instead of enum in verification result. [Lei]
- Fix the incorrect label value for paragraph and section. [Lei]
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
---
virtio-crypto.tex | 1109 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 1107 insertions(+), 2 deletions(-)
diff --git a/virtio-crypto.tex b/virtio-crypto.tex
index 44819f9..d3236df 100644
--- a/virtio-crypto.tex
+++ b/virtio-crypto.tex
@@ -6,7 +6,7 @@ decryption requests are placed in any of teh data active queues and are ultimate
backend crypto accelerators. The second kind of queue is the control queue used to create
or destroy sessions for symmetric algorithms and will control some advanced
features in the future. The virtio crypto device provides the following crypto
-services: CIPHER, MAC, HASH, and AEAD.
+services: CIPHER, MAC, HASH, AEAD and ASYM.
\subsection{Device ID}\label{sec:Device Types / Crypto Device / Device ID}
@@ -47,6 +47,9 @@ struct virtio_crypto_config {
le32 mac_algo_l;
le32 mac_algo_h;
le32 aead_algo;
+ le32 asym_algo;
+ /*Rsa padding capabilities*/
+ le32 rsa_padding;
/* Maximum length of cipher key */
le32 max_cipher_key_len;
/* Maximum length of authenticated key */
@@ -80,6 +83,8 @@ The following services are defined:
#define VIRTIO_CRYPTO_SERVICE_MAC 2
/* AEAD (Authenticated Encryption with Associated Data) service */
#define VIRTIO_CRYPTO_SERVICE_AEAD 3
+/* ASYM (Asymmetric crypto algorithms) service */
+#define VIRTIO_CRYPTO_SERVICE_ASYM 4
\end{lstlisting}
The last driver-read-only fields specify detailed algorithms masks
@@ -153,6 +158,28 @@ The following AEAD algorithms are defined:
#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3
\end{lstlisting}
+The following asymmetric algorithms are defined:
+
+\begin{lstlisting}
+#define VIRTIO_CRYPTO_ASYM_NONE 0
+#define VIRTIO_CRYPTO_ASYM_RSA 1
+#define VIRTIO_CRYPTO_ASYM_DSA 2
+#define VIRTIO_CRYPTO_ASYM_DH 3
+#define VIRTIO_CRYPTO_ASYM_ECDSA 4
+#define VIRTIO_CRYPTO_ASYM_ECDH 5
+\end{lstlisting}
+
+The following rsa padding capabilities are defined:
+
+\begin{lstlisting}
+#define VIRTIO_CRYPTO_RSA_NO_PADDING 0
+#define VIRTIO_CRYPTO_RSA_PKCS1_PADDING 1
+#define VIRTIO_CRYPTO_RSA_SSLV23_PADDING 2
+#define VIRTIO_CRYPTO_RSA_PKCS1_OAEP_PADDING 3
+#define VIRTIO_CRYPTO_RSA_X931_PADDING 4
+#define VIRTIO_CRYPTO_RSA_PKCS1_PSS_PADDING 5
+\end{lstlisting}
+
\begin{note}
Any other value is reserved for future use.
\end{note}
@@ -168,6 +195,7 @@ Any other value is reserved for future use.
\item The device MUST set \field{max_size} to show the maximum size of crypto request the device supports.
\item The device MUST set \field{max_cipher_key_len} to show the maximum length of cipher key if the device supports CIPHER service.
\item The device MUST set \field{max_auth_key_len} to show the maximum length of authenticated key if the device supports MAC service.
+\item The device MUST set \field{rsa_padding} to show the padding capabilities offered by the device.
\end{itemize*}
\drivernormative{\subsubsection}{Device configuration layout}{Device Types / Crypto Device / Device configuration layout}
@@ -182,6 +210,7 @@ Any other value is reserved for future use.
\item The driver SHOULD read \field{max_size} to discover the maximum size of crypto request the device supports.
\item The driver SHOULD read \field{max_cipher_key_len} to discover the maximum length of cipher key the device supports.
\item The driver SHOULD read \field{max_auth_key_len} to discover the maximum length of authenticated key the device supports.
+\item The driver MAY read \field{rsa_padding} to discover the padding capabilities offered by the device.
\end{itemize*}
\subsection{Device Initialization}\label{sec:Device Types / Crypto Device / Device Initialization}
@@ -264,6 +293,18 @@ struct virtio_crypto_op_header {
VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00)
#define VIRTIO_CRYPTO_AEAD_DECRYPT \
VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01)
+#define VIRTIO_CRYPTO_ASYM_SIGN \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_ASYM, 0x00)
+#define VIRTIO_CRYPTO_ASYM_VERIFY \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_ASYM, 0x01)
+#define VIRTIO_CRYPTO_ASYM_ENCRYPT \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_ASYM, 0x02)
+#define VIRTIO_CRYPTO_ASYM_DECRYPT \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_ASYM, 0x03)
+#define VIRTIO_CRYPTO_ASYM_KEY_GEN \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_ASYM, 0x04)
+#define VIRTIO_CRYPTO_ASYM_KEY_EXCHG \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_ASYM, 0x05)
le32 opcode;
/* algo should be service-specific algorithms */
le32 algo;
@@ -575,6 +616,23 @@ struct virtio_crypto_op_data_req {
struct virtio_crypto_hash_data_req hash_req;
struct virtio_crypto_mac_data_req mac_req;
struct virtio_crypto_aead_data_req aead_req;
+
+ struct virtio_crypto_ecdsa_sign_req ecdsa_sign_req;
+ struct virtio_crypto_dsa_sign_req dsa_sign_req;
+ struct virtio_crypto_rsa_sign_req rsa_sign_req;
+ struct virtio_crypto_ecdsa_verify_req ecdsa_verify_req;
+ struct virtio_crypto_dsa_verify_req dsa_verify_req;
+ struct virtio_crypto_rsa_verify_req rsa_verify_req;
+ struct virtio_crypto_rsa_enc_req rsa_enc_req
+ struct virtio_crypto_rsa_dec_req rsa_dec_req;
+ struct virtio_crypto_rsa_keygen_req rsa_keygen_req;
+ struct virtio_crypto_dsa_keygen_req dsa_keygen_req;
+ struct virtio_crypto_ec_keygen_req ec_keygen_req;
+ struct virtio_crypto_dh_keyexchg_param_gen_req dh_keyexchg_param_gen_req;
+ struct virtio_crypto_dh_keyexchg_key_gen_req dh_keyexchg_key_gen_req;
+ struct virtio_crypto_dh_keyexchg_key_compute_req dh_keyexchg_key_compute_req;
+ struct virtio_crypto_ecdh_keyexchg_key_gen_req ecdh_keyexchg_key_gen_req;
+ struct virtio_crypto_ecdh_keyexchg_key_compute_req ecdh_keyexchg_key_compute_req;
} u;
};
\end{lstlisting}
@@ -1026,4 +1084,1051 @@ The input data includes both destination data used to save the results of the AE
\item The device MUST copy the authentication tag to the dst_data[] offset the cipher result.
\item The device MUST set the \field{status} field in struct virtio_crypto_inhdr to one of the values of enum VIRITO_CRYPTO_STATUS.
\item When the \field{opcode} is VIRTIO_CRYPTO_AEAD_DECRYPT, the device MUST verify and return the verification result to the driver, and if the verification result is incorrect, VIRTIO_CRYPTO_BADMSG (bad message) MUST be returned to the driver.
-\end{itemize*}
\ No newline at end of file
+\end{itemize*}
+
+\subsubsection{Asymmetric Crypto Service Operation}\label{sec:Device Types / Crypto Device / Device Operation /
+Crypto operation / Asymmetric Crypto Service Operation}
+
+In general, asymmetric crypto service can be referred as signature, verification,
+encryption, decryption, key generation and key exchange. Not each algorithm supports
+all these services.
+
+Asymmetric crypto service normally does't need session operations, the request is encapsulated within one packet
+which is represented by \field{virtio_crypto_op_data_req}.
+(see \ref{sec:Device Types / Crypto Device / Device Operation / Data Virtqueue}).
+
+Once service request is handled by the device, the device writes back the operation results to the corresponding
+fields in the request packet.
+
+\devicenormative{\paragraph}{Asymmetric Crypto Service Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation}
+\begin{itemize*}
+\item The device MUST parse the field \field{opcode} within \field{virtio_crypto_op_header} (see \ref{sec:Device Types / Crypto Device / Device Operation}) before
+it handles the corresponding service request.
+\item The device MUST set the operation status in field \field{status} within \field{idata}.
+\item The device MUST update the operation result to the fields in \field{idata} if the operation is successful.
+\end{itemize*}
+
+\drivernormative{\paragraph}{Asymmetric Crypto Service Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation}
+\begin{itemize*}
+\item The driver MUST set the corresponding \field{opcode} in \field{virtio_crypto_op_header} according to different services.
+\item The driver MUST offer operatable buffer within \field{idata} if the service request structure defines.
+\end{itemize*}
+
+\paragraph{Signature: ECDSA signature operation}\label{sec:Device Types / Crypto Device /
+Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Signature: ECDSA signature operation}
+
+\begin{lstlisting}
+struct virtio_crypto_ec_group {
+ le32 xg_len;
+ le32 yg_len;
+ le32 n_len;
+ le32 q_len;
+ le32 a_len;
+ le32 b_len;
+ le32 h_len;
+ le32 reserved;
+};
+
+struct virtio_crypto_ec_group_data {
+ u8 xg[xg_len];
+ u8 yg[yg_len];
+ u8 n[n_len];
+ u8 q[q_len];
+ u8 a[a_len];
+ u8 b[b_len];
+ u8 h[h_len];
+};
+
+#define VIRTIO_CRYPTO_EC_FIELD_TYPE_PRIME 0
+#define VIRTIO_CRYPTO_EC_FIELD_TYPE_BINARY 1
+
+struct virtio_crypto_ecdsa_sign_para{
+ /* Hash alogrithms applied to msg */
+ le32 hash_algo;
+ /* EC field_type, see VIRTIO_CRYPTO_EC_FIELD_TYPE_* definition */
+ le32 field_type;
+ /* EC Group parameters */
+ struct virtio_crypto_ec_group ec;
+ /* length of random value */
+ le32 k_len;
+ /* length of private key */
+ le32 d_len;
+
+ /* length of message */
+ le32 msg_len;
+ /* length of signature result */
+ le32 r_len;
+ le32 s_len;
+ le32 reserved;
+
+ struct virtio_crypto_ec_group_data ec_data;
+ u8 k[k_len];
+ u8 d[d_len];
+};
+
+struct virtio_crypto_ecdsa_sign_output {
+ /* Message need to be signed */
+ u8 msg[msg_len];
+};
+
+struct virtio_crypto_ecdsa_sign_input {
+ /* operation result */
+ le32 status;
+ le32 reserved;
+
+ /* signature result */
+ u8 r[r_len];
+ u8 s[s_len];
+};
+\end{lstlisting}
+
+ECDSA signature operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_ecdsa_sign_req {
+ struct virtio_crypto_ecdsa_sign_para parameter;
+ struct virtio_crypto_ecdsa_sign_output odata;
+
+ struct virtio_crypto_ecdsa_sign_input idata;
+};
+\end{lstlisting}
+
+
+\devicenormative{\subparagraph}{ECDSA signature operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / ECDSA signature operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{ECDSA signature operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / ECDSA signature operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_SIGN,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_ECDSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the \field{r,s} in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Signature: DSA signature operation}\label{sec:Device Types / Crypto Device /
+Device Operation / Crypto operation / Asymmetric Crypto Service Operation/ Signature: DSA signature operation}
+
+\begin{lstlisting}
+struct virtio_crypto_dsa_group {
+ le32 p_len;
+ le32 q_len;
+ le32 g_len;
+ le32 reserved;
+};
+
+struct virtio_crypto_dsa_group_data {
+ u8 p[p_len];
+ u8 q[q_len];
+ u8 g[g_len];
+}
+
+struct virtio_crypto_dsa_sign_para {
+ /* Hash alogrithms applied to msg */
+ le32 hash_algo;
+ le32 reserved1;
+
+ /* DSA group parameter */
+ struct virtio_crypto_dsa_group dsa;
+ /* length of random value */
+ le32 k_len;
+ /* length of private key */
+ le32 x_len;
+
+ /* length of message */
+ le32 msg_len;
+ /* length of signautre result */
+ le32 r_len;
+ le32 s_len;
+ le32 reserved2;
+
+ struct virtio_crypto_dsa_group_data dsa_group_data;
+ u8 k[k_len];
+ u8 x[x_len];
+};
+
+struct virtio_crypto_dsa_sign_output {
+ u8 msg[msg_len];
+};
+
+struct virtio_crypto_dsa_sign_input {
+ /* operation result */
+ le32 status;
+ le32 reserved;
+
+ /* signature result */
+ u8 r[r_len];
+ u8 s[s_len];
+};
+\end{lstlisting}
+DSA signature operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_dsa_sign_req {
+ struct virtio_crypto_dsa_sign_para parameter;
+ struct virtio_crypto_dsa_sign_output odata;
+
+ struct virtio_crypto_dsa_sign_input idata;
+};
+\end{lstlisting}
+
+
+\devicenormative{\subparagraph}{DSA signature operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / DSA signature operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{DSA signature operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / DSA signature operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_SIGN,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_DSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the \field{r,s} in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Signature: RSA signature operation}\label{sec:Device Types / Crypto Device /
+Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Signature: RSA signature operation}
+
+\begin{lstlisting}
+
+struct virtio_crypto_rsa_pub_key{
+ /* The RSA modules */
+ le32 n_len;
+ /* The RSA public exponent */
+ le32 e_len;
+};
+
+struct virtio_crypto_rsa_pub_key_data{
+ /* The RSA modules */
+ u8 n[n_len];
+ /* The RSA public exponent */
+ u8 e[e_len];
+};
+
+struct virtio_crypto_rsa_priv_key_rep1{
+ /* The RSA modules */
+ le32 n_len;
+ /* The RSA private exponent */
+ le32 d_len;
+}
+
+struct virtio_crypto_rsa_priv_key_rep1_data{
+ /* The RSA modules */
+ u8 n[n_len];
+ /* The RSA private exponent */
+ u8 d[d_len];
+};
+
+struct virtio_crypto_rsa_priv_key_rep2{
+ /* The first factor */
+ le32 p_len;
+ /* The second factor */
+ le32 q_len;
+ /* The first factor's CRT exponent */
+ le32 dp_len;
+ /* The second factor's CRT exponent */
+ le32 dp_len;
+ /* The first CRT coeffieient */
+ le32 qinv_len;
+ /* The factors array when prime_number > 2 */
+ le32 r_len;
+ /* The CRT exponent array when prime_number > 2 */
+ le32 d_len;
+ /* The CRT coeffieient array when prime_number > 2 */
+ le32 t_len;
+};
+
+struct virtio_crypto_rsa_priv_key_rep2_data{
+ /* The first factor */
+ u8 p[p_len];
+ /* The second factor */
+ u8 q[q_len];
+ /* The first factor's CRT exponent */
+ u8 dp[dp_len];
+ /* The second factor's CRT exponent */
+ u8 dq[dp_len];
+ /* The first CRT coeffieient */
+ u8 qinv[qinv_len];
+ /* The factors array when prime_number > 2 */
+ u8 r[][r_len];
+ /* The CRT exponent array when prime_number > 2 */
+ u8 d[][d_len];
+ /* The CRT coeffieient array when prime_number > 2 */
+ u8 t[][t_len];
+};
+
+struct virtio_crypto_rsa_priv_key {
+ le32 prime_number;
+#define VIRTIO_CRYPTO_RSA_PRIV_KEY_REPTYPE1 0
+#define VIRTIO_CRYPTO_RSA_PRIV_KEY_REPTYPE2 1
+ le32 priv_key_rep_type;
+ union {
+ struct virtio_crypto_rsa_priv_key_rep1 privkey_rep1;
+ struct virtio_crypto_rsa_priv_key_rep2 privkey_rep2;
+ }key;
+
+ union {
+ struct virtio_crypto_rsa_priv_key_rep1_data privkey_rep1_data;
+ struct virtio_crypto_rsa_priv_key_rep2_data privkey_rep2_data;
+ }key_data;
+};
+
+struct virtio_crypto_rsa_sign_para {
+ /* Hash alogrithms applied to msg */
+ le32 hash_algo;
+ le32 padding_mode;
+ struct virtio_crypto_rsa_priv_key priv_key;
+
+ le32 msg_len;
+ le32 signature_len;
+
+ struct virtio_crypto_rsa_priv_key_data priv_key_data;
+};
+
+struct virtio_crypto_rsa_sign_output {
+ u8 msg[msg_len];
+};
+
+struct virtio_crypto_rsa_sign_input {
+ le32 status;
+ le32 reserved;
+
+ u8 signature[signature_len];
+};
+\end{lstlisting}
+
+RSA signature operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_rsa_sign_req {
+ struct virtio_crypto_rsa_sign_para parameter;
+ struct virtio_crypto_rsa_sign_output odata;
+
+ struct virtio_crypto rsa_sign_input idata;
+};
+\end{lstlisting}
+
+
+\devicenormative{\subparagraph}{ECDSA signature operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA signature operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{ECDSA signature operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA signature operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_SIGN,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_RSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the \field{signature} in \field{idata} is operatable.
+\end{itemize*}
+
+\paragraph{Verification: Common Structure}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Verification: Common Structure}
+
+The result of verification operation can be represented by structure \field{virtio_crypto_asym_verify_gen_input}.
+
+\begin{lstlisting}
+struct virtio_crypto_asym_verify_gen_input {
+ /* Operation result */
+ le32 status;
+ /* Verification result, VIRTIO_CRYPTO_OK for a susscssful verification
+ VIRTIO_CRYPTO_BADMSG for a failed verification */
+ le32 verify_result;
+};
+\end{lstlisting}
+
+\paragraph{Verification: ECDSA Verification Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Verification: ECDSA Verification Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_ecdsa_verify_para {
+ /* Hash alogrithms applied to msg */
+ le32 hash_algo;
+ /* EC field_type, see VIRTIO_CRYPTO_EC_FIELD_TYPE_* definition */
+ le32 field_type;
+ /* EC Group parameters */
+ struct virtio_crypto_ec_group ec;
+ /* length of public key */
+ le32 x_len;
+ le32 y_len;
+
+ /* length of signauture value */
+ le32 r_len;
+ le32 s_len;
+ /* length of message */
+ le32 msg_len;
+ le32 reserved;
+
+ struct virtio_crypto_ec_group_data ec_data;
+ /* Public key */
+ u8 x[x_len];
+ u8 y[y_len];
+};
+
+struct virtio_crypto_ecdsa_verify_output {
+ /* Signature value */
+ u8 r[r_len];
+ u8 s[s_len];
+
+ u8 msg[msg_len];
+};
+\end{lstlisting}
+
+ECDSA Verification Operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_ecdsa_verify_req {
+ struct virtio_crypto_ecdsa_verify_para parameter;
+ struct virtio_crypto_ecdsa_verify_output odata;
+
+ struct virtio_crypto_asym_verify_gen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{ECDSA verification operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / ECDSA verification operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{ECDSA verification operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / ECDSA verification operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_VERIFY,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_ECDSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it checks \field{verify_result}.
+\end{itemize*}
+
+\paragraph{Verification: DSA Verification Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Verification: DSA Verification Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_dsa_verify_para {
+ le32 hash_algo;
+ le32 reserved;
+
+ /* DSA Group parameters */
+ struct virtio_crypto_dsa_group dsa;
+ le32 y_len;
+
+ /* length of signature value */
+ le32 r_len;
+ le32 s_len;
+ /* length of message */
+ le32 msg_len;
+
+ struct virtio_crypto_dsa_group_data dsa_data;
+ /* Public key */
+ u8 y[y_len];
+};
+
+struct virtio_crypto_dsa_verify_output {
+ /* Signature value */
+ u8 r[r_len];
+ u8 s[s_len];
+
+ u8 msg[msg_len];
+};
+\end{lstlisting}
+
+DSA Verification Operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_dsa_verify_req {
+ struct virtio_crypto_dsa_verify_para parameter;
+ struct virtio_crypto_dsa_verify_output odata;
+
+ struct virtio_crypto_asym_verify_gen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{DSA verification operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / DSA verification operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata}.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{DSA verification operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / DSA verification operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_VERIFY,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_DSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it checks \field{verify_result}.
+\end{itemize*}
+
+\paragraph{Verification: RSA Verification Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Verification: RSA Verification Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_rsa_verify_para {
+ le32 hash_algo;
+ le32 padding_mode;
+ struct virtio_crypto_rsa_pub_key pubkey;
+
+ le32 msg_len;
+ le32 reserved;
+
+ struct virtio_crypto_rsa_pub_key_data pubkey_data;
+};
+
+struct virtio_crypto_rsa_verify_output {
+ u8 msg[msg_len];
+};
+\end{lstlisting}
+
+RSA verification operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_rsa_verify_req {
+ struct virtio_crypto_rsa_verify_para parameter;
+ struct virtio_crypto_rsa_verify_output odata;
+
+ struct virtio_crypto_asym_verify_gen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{RSA verification operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA verification operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata}.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{RSA verification operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA verification operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_VERIFY,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_RSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it checks \field{verify_result}.
+\end{itemize*}
+
+\paragraph{Encryption: RSA Encryption Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Encryption: RSA Encryption Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_rsa_enc_para {
+ le32 padding_mode;
+ struct virtio_crypto_rsa_pub_key pub_key;
+ le32 msg_len;
+
+ struct virtio_crypto_rsa_pub_key_data pub_key_data;
+};
+
+struct virtio_crypto_rsa_enc_output {
+ u8 msg[msg_len];
+};
+
+struct virtio_crypto_rsa_enc_input {
+ le32 status;
+ le32 reserved;
+
+ u8 cmsg[msg_len];
+};
+\end{lstlisting}
+
+RSA encryption operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_rsa_enc_req {
+ struct virtio_crypto_rsa_enc_para parameter;
+ struct virtio_crypto_rsa_enc_output odata;
+
+ struct virtio_crypto_rsa_enc_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{RSA Encryption Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA Encryption Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{RSA Encryption Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA Encryption Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_ENCRYPT,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_RSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the \field{cmsg} in \field{idata} is operatable.
+\end{itemize*}
+
+\paragraph{Decryption: RSA Decryption Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Decryption: RSA Decryption Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_rsa_dec_para {
+ le32 padding_mode;
+ struct virtio_crypto_rsa_priv_key priv_key;
+ le32 cmsg_len;
+
+ struct virtio_crypto_rsa_priv_key_data priv_key_data;
+};
+
+struct virtio_crypto_rsa_dec_output {
+ u8 cmsg[cmsg_len];
+}
+
+struct virtio_crypto_rsa_dec_input {
+ le32 status;
+ le32 reserved;
+
+ u8 msg[cmsg_len];
+};
+\end{lstlisting}
+
+RSA decryption operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_rsa_dec_req {
+ struct virtio_crypto_rsa_dec_para parameter;
+ struct virtio_crypto_rsa_dec_output odata;
+
+ struct virtio_crypto_rsa_dec_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{RSA Decryption Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA Decryption Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{RSA Decryption Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA Decryption Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_DECRYPT,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_RSA.
+\item The driver SHOULD set all fields in \field{parameter} and \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the \field{msg} in \field{idata} is operatable.
+\end{itemize*}
+
+\paragraph{Key Generation: RSA Key Generation Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Generation: RSA Key Generation Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_rsa_keygen_para {
+ /* The modules length in bytes */
+ le32 modulus_len;
+ le32 rsa_prime_number;
+ le32 priv_key_rep_type;
+ le32 e_len;
+
+ /* the public exponent */
+ u8 e[e_len];
+};
+
+struct virtio_crypto_rsa_keygen_input {
+ le32 status;
+ le32 reserved;
+
+ struct virtio_crypto_rsa_priv_key priv_key;
+ struct virtio_crypto_rsa_pub_key pub_key;
+
+ struct virtio_crypto_rsa_priv_key_data priv_key_data;
+ struct virtio_crypto_rsa_pub_key_data pub_key_data;
+};
+\end{lstlisting}
+
+RSA key-generation operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_rsa_keygen_req {
+ struct virtio_crypto_rsa_keygen_para parameter;
+
+ struct virtio_crypto_rsa_keygen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{RSA Key Generation Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA Key Generation Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{RSA Key Generation Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / RSA Key Generation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_GEN,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_RSA.
+\item The driver SHOULD set all fields in \field{parameter} except \field{reserved} field.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the \field{priv_key} and \field{pub_key} in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Key Generation: DSA Key Generation operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Generation: DSA Key Generation operation}
+
+\begin{lstlisting}
+struct virtio_crypto_dsa_keygen_para {
+ le32 modulus_len;
+ le32 reserved;
+};
+
+struct virtio_crypto_dsa_keygen_input {
+ le32 status;
+ le32 reserved;
+
+ /* DSA Group parameters */
+ struct virtio_crypto_dsa_group dsa;
+ /* length of private key */
+ le32 x_len;
+ /* length of public key */
+ le32 y_len;
+
+ struct virtio_crypto_dsa_group_data dsa_data;
+ /* Private key */
+ u8 x[x_len];
+ /* Public key */
+ u8 y[y_len];
+};
+\end{lstlisting}
+
+DSA key-generation operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_dsa_keygen_req {
+ struct virtio_crypto_dsa_keygen_para parameter;
+
+ struct virtio_crypto_dsa_keygen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{DSA Key Generation Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / DSA Key Generation Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{DSA Key Generation Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / DSA Key Generation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_GEN,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_DSA.
+\item The driver SHOULD set all fields in \field{parameter} except \field{reserved} field.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the \field{priv_key} and \field{pub_key} in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Key Generation: EC Key Generation operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Generation: EC Key Generation operation}
+
+\begin{lstlisting}
+struct virtio_crypto_ec_keygen_para {
+ /* EC field_type, see VIRTIO_CRYPTO_EC_FIELD_TYPE_* definition */
+ le32 field_type;
+ le32 reserved;
+
+ struct virtio_crypto_ec_group ec;
+
+ /* length of private key */
+ le32 d_len;
+ /* length of public key */
+ le32 x_len;
+ le32 y_len;
+
+ /* EC group parameters */
+ struct virtio_crypto_ec_group_data ec_data;
+};
+
+struct virtio_crypto_ec_keygen_input {
+ le32 status;
+ le32 reserved;
+
+ /* Private key */
+ u8 d[d_len];
+
+ /* Public key */
+ u8 x[x_len];
+ u8 y[y_len];
+};
+\end{lstlisting}
+
+EC key-generation operation request is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_ec_keygen_req {
+ struct virtio_crypto_ec_keygen_para parameter;
+
+ struct virtio_crypto_ec_keygen_input key;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{EC Key Generation Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / EC Key Generation Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{EC Key Generation Operation}{Device Types / Crypto Device / Device Operation / Asymmetric Crypto Service Operation / EC Key Generation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_GEN,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_ECDH or VIRTIO_CRYPTO_ASYM_ECDSA.
+\item The driver SHOULD set all fields in \field{parameter} except \field{reserved} field.
+\item The driver MUST check the operation result \field{status} in \field{idata} before it operates other fields in \field{idata}.
+Only if the operation is successful, the other fields in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Key Exchange: Common Structure}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Exchange: Common Structure}
+
+Key Exchange request has two kinds of operations in general, key generation and key computation.
+For DH, it has additional operation: parameter generation operation.
+
+\paragraph{Key Exchange: DH Parameter Generation Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Exchange: DH Parameter Generation Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_dh_parameter {
+ le32 modules_len;
+ le32 reserved;
+
+ /* length of random odd prime number */
+ le32 p_len;
+ /* length of base (g) */
+ le32 g_len;
+
+ /* random odd prime number */
+ u8 p[p_len];
+ /* base (g) */
+ u8 g[g_len];
+};
+
+#define VIRTIO_CRYPTO_KEY_EXCHANGE_GEN_KEY 0
+#define VIRTIO_CRYPTO_KEY_EXCHANGE_COMPUTE_KEY 1
+/* It's only valid in case DH algorithm*/
+#define VIRTIO_CRYPTO_KEY_EXCHANGE_GEN_DH_PARAM 2
+
+struct virtio_crypto_dh_keyexchg_para {
+ /*
+ * The sub-operation in key exchange,
+ * see VIRTIO_CRYPTO_KEY_EXCHANGE_ definition
+ */
+ le32 keyexchg_op;
+ le32 reserved;
+
+ struct virtio_crypto_dh_parameter dh_param;
+};
+
+struct virtio_crypto_dh_keyexchg_param_gen_input {
+ le32 status;
+ le32 reserved;
+};
+\end{lstlisting}
+
+DH Parameter Generation Operation in Key-Exchange is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_dh_keyexchg_param_gen_req {
+ struct virtio_crypto_dh_keyexchg_para parameter;
+
+ struct virtio_crypto_dh_keyexchg_param_gen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{Key Exchange: DH Parameter Generation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: DH Parameter Generation Operation}
+\begin{itemize*}
+\item The device SHOULD set the operation result in \field{idata}, and set \field{p} and \field{g} in \field{dh_param}.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{Key Exchange: DH Parameter Generation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: DH Parameter Generation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_EXCHG,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_DH.
+\item The driver MUST set the \field{keyexchg_op} to VIRTIO_CRYPTO_KEY_EXCHANGE_GEN_DH_PARAM in \field{parameter}.
+\item The driver SHOULD set \field{modules_len} in \field{dh_param}.
+\item The driver MUST check the operation result \field{status} in \field{idata} firstly.
+Only if the operation is successful, the other fields in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Key Exchange: DH Key Generation Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Exchange: DH Key Generation Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_dh_keyexchg_keygen_input {
+ le32 status;
+ le32 reserved;
+
+ /* length of private key */
+ le32 x_len;
+ /* length of public key */
+ le32 y_len;
+
+ /* private key */
+ u8 x[x_len];
+ /* public key */
+ u8 y[y_len];
+};
+\end{lstlisting}
+
+DH Key Generation Operation in Key-Exchange is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_dh_keyexchg_key_gen_req {
+ struct virtio_crypto_dh_keyexchg_para parameter;
+
+ struct virtio_crypto_dh_key_exchg_keygen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{Key Exchange: DH Key Generation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: DH Key Generation Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{Key Exchange: DH Key Generation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: DH Key Generation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_EXCHG,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_DH.
+\item The driver MUST set the \field{keyexchg_op} to VIRTIO_CRYPTO_KEY_EXCHANGE_GEN_KEY in \field{parameter}.
+\item The driver SHOULD set all other fields in \field{parameter} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} firstly.
+Only if the operation is successful, the other fields in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Key Exchange: DH Key Computation Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Exchange: DH Key Computation Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_dh_keyexchg_compute_key_output {
+ /* length of local private key */
+ le32 x_len;
+ /* length of peer's public key */
+ le32 y_len;
+
+ le32 shared_secret_len;
+ le32 reserved;
+
+ /* local private key */
+ u8 x[x_len];
+ /* peer's public key */
+ u8 y[y_len];
+};
+
+struct virtio_crypto_dh_keyexchg_compute_key_input {
+ le32 status;
+ le32 reserved;
+
+ u8 shared_secret[shared_secret_len];
+};
+\end{lstlisting}
+
+DH Key Computation Operation in Key-Exchange is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_dh_keyexchg_key_compute_req {
+ struct virtio_crypto_dh_keyexchg_para parameter;
+ struct virtio_crypto_dh_keyexchg_compute_key_output odata;
+
+ struct virtio_crypto_dh_keyexchg_compute_key_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{Key Exchange: DH Key Computation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: DH Key Computation Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{Key Exchange: DH Key Computation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: DH Key Computation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_EXCHG,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_DH.
+\item The driver MUST set the \field{keyexchg_op} to VIRTIO_CRYPTO_KEY_EXCHANGE_COMPUTE_KEY in \field{parameter}.
+\item The driver SHOULD set all other fields in \field{parameter} except field \field{reserved}.
+\item The driver SHOULD set all fields in \field{odata} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} firstly.
+Only if the operation is successful, the other fields in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Key Exchange: ECDH Key Generation Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Exchange: ECDH Key Generation Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_ecdh_keyexchg_keygen_para {
+ /*
+ * The sub-operation in key exchange,
+ * see VIRTIO_CRYPTO_KEY_EXCHANGE_ definition
+ */
+ le32 keyexchg_op;
+ le32 reserved;
+
+ struct virtio_crypto_ec_keygen_para parameter;
+};
+\end{lstlisting}
+
+ECDH Key Generation Operation in Key-Exchange is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_ecdh_keyexchg_key_gen_req {
+ struct virtio_crypto_ecdh_keyexchg_keygen_para parameter;
+
+ struct virtio_crypto_ec_keygen_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{Key Exchange: ECDH Key Generation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: ECDH Key Generation Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{Key Exchange: ECDH Key Generation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: ECDH Key Generation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_EXCHG,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_ECDH.
+\item The driver MUST set the \field{keyexchg_op} to VIRTIO_CRYPTO_KEY_EXCHANGE_GEN_KEY in \field{parameter}.
+\item The driver SHOULD set all other fields in \field{parameter} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} firstly.
+Only if the operation is successful, the other fields in \field{idata} are operatable.
+\end{itemize*}
+
+\paragraph{Key Exchange: ECDH Key Computation Operation}\label{sec:Device Types /
+Crypto Device / Device Operation / Crypto operation / Asymmetric Crypto Service Operation / Key Exchange: ECDH Key Computation Operation}
+
+\begin{lstlisting}
+struct virtio_crypto_ecdh_keyexchg_compute_key_para {
+ /*
+ * The sub-operation in key exchange,
+ * see VIRTIO_CRYPTO_KEY_EXCHANGE_ definition
+ */
+ le32 keyexchg_op;
+ le32 reserved;
+
+ /* length of local private key */
+ le32 d_len;
+ /* length of peer's public key */
+ le32 x_len;
+ le32 y_len;
+ /* length of shared_secret */
+ le32 shared_secret_len;
+
+ struct virtio_crypto_ec_keygen_para parameter;
+};
+
+struct virtio_crypto_ecdh_keyexchg_compute_key_output {
+ /* local private key */
+ u8 d[d_len];
+
+ /* peer's public key */
+ u8 x[x_len];
+ u8 y[y_len];
+};
+
+struct virtio_crypto_ecdh_keyexchg_compute_key_input {
+ le32 status;
+ le32 reserved;
+
+ u8 shared_secret[shared_secret_len];
+};
+\end{lstlisting}
+
+ECDH Key Computation Operation in Key-Exchange is defined as below:
+\begin{lstlisting}
+struct virtio_crypto_ecdh_keyexchg_key_compute_req {
+ struct virtio_crypto_ecdh_keyexchg_compute_key_para parameter;
+ struct virtio_crypto_ecdh_keyexchg_compute_key_output odata;
+
+ struct virtio_crypto_ecdh_keyexchg_compute_key_input idata;
+};
+\end{lstlisting}
+
+\devicenormative{\subparagraph}{Key Exchange: ECDH Key Computation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: ECDH Key Computation Operation}
+\begin{itemize*}
+\item The device MUST set the operation results in \field{idata} according to the general device requirments for asymmetric crypto service.
+\end{itemize*}
+
+\drivernormative{\subparagraph}{Key Exchange: ECDH Key Computation Operation}{Device Types / Crypto Device / Device Operation /
+Asymmetric Crypto Service Operation / Key Exchange: ECDH Key Computation Operation}
+\begin{itemize*}
+\item The driver MUST set the \field{opcode} in \field{virtio_crypto_op_header} to VIRTIO_CRYPTO_ASYM_KEY_EXCHG,
+set \field{algo} to VIRTIO_CRYPTO_ASYM_ECDH.
+\item The driver MUST set the \field{keyexchg_op} to VIRTIO_CRYPTO_KEY_EXCHANGE_GEN_KEY in \field{parameter}.
+\item The driver SHOULD set all other fields in \field{parameter} except field \field{reserved}.
+\item The driver MUST check the operation result \field{status} in \field{idata} firstly.
+Only if the operation is successful, the other fields in \field{idata} are operatable.
+\end{itemize*}
--
1.9.3
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]