OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [PATCH v9 2/5] virtio-balloon: VIRTIO_BALLOON_F_BALLOON_CHUNKS


On Thu, Apr 13, 2017 at 05:35:05PM +0800, Wei Wang wrote:
> Add a new feature, VIRTIO_BALLOON_F_BALLOON_CHUNKS, which enables

Let's find a better name here.
VIRTIO_BALLOON_F_PAGE_CHUNK


> the transfer of the ballooned (i.e. inflated/deflated) pages in
> chunks to the host.
> 
> The implementation of the previous virtio-balloon is not very
> efficient, because the ballooned pages are transferred to the
> host one by one. Here is the breakdown of the time in percentage
> spent on each step of the balloon inflating process (inflating
> 7GB of an 8GB idle guest).
> 
> 1) allocating pages (6.5%)
> 2) sending PFNs to host (68.3%)
> 3) address translation (6.1%)
> 4) madvise (19%)
> 
> It takes about 4126ms for the inflating process to complete.
> The above profiling shows that the bottlenecks are stage 2)
> and stage 4).
> 
> This patch optimizes step 2) by transferring pages to the host in
> chunks. A chunk consists of guest physically continuous pages, and
> it is offered to the host via a base PFN (i.e. the start PFN of
> those physically continuous pages) and the size (i.e. the total
> number of the pages). A chunk is formated as below:

formatted

> --------------------------------------------------------
> |                 Base (52 bit)        | Rsvd (12 bit) |
> --------------------------------------------------------
> --------------------------------------------------------
> |                 Size (52 bit)        | Rsvd (12 bit) |
> --------------------------------------------------------
> 
> By doing so, step 4) can also be optimized by doing address
> translation and madvise() in chunks rather than page by page.
> 
> With this new feature, the above ballooning process takes ~590ms
> resulting in an improvement of ~85%.
> 
> TODO: optimize stage 1) by allocating/freeing a chunk of pages
> instead of a single page each time.
> 
> Signed-off-by: Wei Wang <wei.w.wang@intel.com>
> Signed-off-by: Liang Li <liang.z.li@intel.com>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>

So we don't need the bitmap to talk to host, it is just
a data structure we chose to maintain lists of pages, right?
OK as far as it goes but you need much better isolation for it.
Build a data structure with APIs such as _init, _cleanup, _add, _clear,
_find_first, _find_next.
Completely unrelated to pages, it just maintains bits.
Then use it here.


> ---
>  drivers/virtio/virtio_balloon.c     | 384 +++++++++++++++++++++++++++++++++---
>  include/uapi/linux/virtio_balloon.h |  13 ++
>  2 files changed, 374 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index f59cb4f..5e2e7cc 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -42,6 +42,10 @@
>  #define OOM_VBALLOON_DEFAULT_PAGES 256
>  #define VIRTBALLOON_OOM_NOTIFY_PRIORITY 80
>  
> +#define PAGE_BMAP_SIZE		(8 * PAGE_SIZE)
> +#define PFNS_PER_PAGE_BMAP	(PAGE_BMAP_SIZE * BITS_PER_BYTE)
> +#define PAGE_BMAP_COUNT_MAX	32
> +

Please prefix with VIRTIO_BALLOON_ and add comments.

>  static int oom_pages = OOM_VBALLOON_DEFAULT_PAGES;
>  module_param(oom_pages, int, S_IRUSR | S_IWUSR);
>  MODULE_PARM_DESC(oom_pages, "pages to free on OOM");
> @@ -50,6 +54,10 @@ MODULE_PARM_DESC(oom_pages, "pages to free on OOM");
>  static struct vfsmount *balloon_mnt;
>  #endif
>  
> +/* Types of pages to chunk */
> +#define PAGE_CHUNK_TYPE_BALLOON 0
> +

Doesn't look like you are ever adding more types in this
patchset.  Pls keep code simple, generalize it later.

> +#define MAX_PAGE_CHUNKS 4096

This is an order-4 allocation. I'd make it 4095 and then it's
an order-3 one.

>  struct virtio_balloon {
>  	struct virtio_device *vdev;
>  	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
> @@ -78,6 +86,32 @@ struct virtio_balloon {
>  	/* Synchronize access/update to this struct virtio_balloon elements */
>  	struct mutex balloon_lock;
>  
> +	/*
> +	 * Buffer for PAGE_CHUNK_TYPE_BALLOON:
> +	 * virtio_balloon_page_chunk_hdr +
> +	 * virtio_balloon_page_chunk * MAX_PAGE_CHUNKS
> +	 */
> +	struct virtio_balloon_page_chunk_hdr *balloon_page_chunk_hdr;
> +	struct virtio_balloon_page_chunk *balloon_page_chunk;
> +
> +	/* Bitmap used to record pages */
> +	unsigned long *page_bmap[PAGE_BMAP_COUNT_MAX];
> +	/* Number of the allocated page_bmap */
> +	unsigned int page_bmaps;
> +
> +	/*
> +	 * The allocated page_bmap size may be smaller than the pfn range of
> +	 * the ballooned pages. In this case, we need to use the page_bmap
> +	 * multiple times to cover the entire pfn range. It's like using a
> +	 * short ruler several times to finish measuring a long object.
> +	 * The start location of the ruler in the next measurement is the end
> +	 * location of the ruler in the previous measurement.
> +	 *
> +	 * pfn_max & pfn_min: forms the pfn range of the ballooned pages
> +	 * pfn_start & pfn_stop: records the start and stop pfn in each cover

cover? what does this mean?

looks like you only use these to pass data to tell_host.
so pass these as parameters and you won't need to keep
them in this structure.

And then you can move this comment to set_page_bmap where
it belongs.

> +	 */
> +	unsigned long pfn_min, pfn_max, pfn_start, pfn_stop;
> +
>  	/* The array of pfns we tell the Host about. */
>  	unsigned int num_pfns;
>  	__virtio32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
> @@ -110,20 +144,201 @@ static void balloon_ack(struct virtqueue *vq)
>  	wake_up(&vb->acked);
>  }
>  
> -static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
> +static inline void init_page_bmap_range(struct virtio_balloon *vb)
> +{
> +	vb->pfn_min = ULONG_MAX;
> +	vb->pfn_max = 0;
> +}
> +
> +static inline void update_page_bmap_range(struct virtio_balloon *vb,
> +					  struct page *page)
> +{
> +	unsigned long balloon_pfn = page_to_balloon_pfn(page);
> +
> +	vb->pfn_min = min(balloon_pfn, vb->pfn_min);
> +	vb->pfn_max = max(balloon_pfn, vb->pfn_max);
> +}
> +
> +/* The page_bmap size is extended by adding more number of page_bmap */

did you mean

	Allocate more bitmaps to cover the given number of pfns
	and add them to page_bmap

?

This isn't what this function does.
It blindly assumes 1 bitmap is allocated
and allocates more, up to PAGE_BMAP_COUNT_MAX.

> +static void extend_page_bmap_size(struct virtio_balloon *vb,
> +				  unsigned long pfns)
> +{
> +	int i, bmaps;
> +	unsigned long bmap_len;
> +
> +	bmap_len = ALIGN(pfns, BITS_PER_LONG) / BITS_PER_BYTE;
> +	bmap_len = ALIGN(bmap_len, PAGE_BMAP_SIZE);

Align? PAGE_BMAP_SIZE doesn't even have to be a power of 2 ...

> +	bmaps = min((int)(bmap_len / PAGE_BMAP_SIZE),
> +		    PAGE_BMAP_COUNT_MAX);

I got lost here.

Please use things like ARRAY_SIZE instead of macros.

> +
> +	for (i = 1; i < bmaps; i++) {
> +		vb->page_bmap[i] = kmalloc(PAGE_BMAP_SIZE, GFP_KERNEL);
> +		if (vb->page_bmap[i])
> +			vb->page_bmaps++;
> +		else
> +			break;
> +	}
> +}
> +
> +static void free_extended_page_bmap(struct virtio_balloon *vb)
> +{
> +	int i, bmaps = vb->page_bmaps;
> +
> +	for (i = 1; i < bmaps; i++) {
> +		kfree(vb->page_bmap[i]);
> +		vb->page_bmap[i] = NULL;
> +		vb->page_bmaps--;
> +	}
> +}
> +

What's the magic number 1 here?
Maybe you want to document what is going on.
Here's a guess:

We keep a single bmap around at all times.
If memory does not fit there, we allocate up to
PAGE_BMAP_COUNT_MAX of chunks.


> +static void free_page_bmap(struct virtio_balloon *vb)
> +{
> +	int i;
> +
> +	for (i = 0; i < vb->page_bmaps; i++)
> +		kfree(vb->page_bmap[i]);
> +}
> +
> +static void clear_page_bmap(struct virtio_balloon *vb)
> +{
> +	int i;
> +
> +	for (i = 0; i < vb->page_bmaps; i++)
> +		memset(vb->page_bmap[i], 0, PAGE_BMAP_SIZE);
> +}
> +
> +static void send_page_chunks(struct virtio_balloon *vb, struct virtqueue *vq,
> +			     int type, bool busy_wait)

busy_wait seems unused. pls drop.

>  {
>  	struct scatterlist sg;
> +	struct virtio_balloon_page_chunk_hdr *hdr;
> +	void *buf;
>  	unsigned int len;
>  
> -	sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
> +	switch (type) {
> +	case PAGE_CHUNK_TYPE_BALLOON:
> +		hdr = vb->balloon_page_chunk_hdr;
> +		len = 0;
> +		break;
> +	default:
> +		dev_warn(&vb->vdev->dev, "%s: chunk %d of unknown pages\n",
> +			 __func__, type);
> +		return;
> +	}
>  
> -	/* We should always be able to add one buffer to an empty queue. */
> -	virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
> -	virtqueue_kick(vq);
> +	buf = (void *)hdr - len;

Moving back to before the header? How can this make sense?
It works fine since len is 0, so just buf = hdr.

> +	len += sizeof(struct virtio_balloon_page_chunk_hdr);
> +	len += hdr->chunks * sizeof(struct virtio_balloon_page_chunk);
> +	sg_init_table(&sg, 1);
> +	sg_set_buf(&sg, buf, len);
> +	if (!virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL)) {
> +		virtqueue_kick(vq);
> +		if (busy_wait)
> +			while (!virtqueue_get_buf(vq, &len) &&
> +			       !virtqueue_is_broken(vq))
> +				cpu_relax();
> +		else
> +			wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> +		hdr->chunks = 0;

Why zero it here after device used it? Better to zero before use.

> +	}
> +}
> +
> +static void add_one_chunk(struct virtio_balloon *vb, struct virtqueue *vq,
> +			  int type, u64 base, u64 size)

what are the units here? Looks like it's in 4kbyte units?

> +{
> +	struct virtio_balloon_page_chunk_hdr *hdr;
> +	struct virtio_balloon_page_chunk *chunk;
> +
> +	switch (type) {
> +	case PAGE_CHUNK_TYPE_BALLOON:
> +		hdr = vb->balloon_page_chunk_hdr;
> +		chunk = vb->balloon_page_chunk;
> +		break;
> +	default:
> +		dev_warn(&vb->vdev->dev, "%s: chunk %d of unknown pages\n",
> +			 __func__, type);
> +		return;
> +	}
> +	chunk = chunk + hdr->chunks;
> +	chunk->base = cpu_to_le64(base << VIRTIO_BALLOON_CHUNK_BASE_SHIFT);
> +	chunk->size = cpu_to_le64(size << VIRTIO_BALLOON_CHUNK_SIZE_SHIFT);
> +	hdr->chunks++;

Isn't this LE? You should keep it somewhere else.

> +	if (hdr->chunks == MAX_PAGE_CHUNKS)
> +		send_page_chunks(vb, vq, type, false);
		and zero chunks here?
> +}
> +
> +static void chunking_pages_from_bmap(struct virtio_balloon *vb,

Does this mean "convert_bmap_to_chunks"?

> +				     struct virtqueue *vq,
> +				     unsigned long pfn_start,
> +				     unsigned long *bmap,
> +				     unsigned long len)
> +{
> +	unsigned long pos = 0, end = len * BITS_PER_BYTE;
> +
> +	while (pos < end) {
> +		unsigned long one = find_next_bit(bmap, end, pos);
> +
> +		if (one < end) {
> +			unsigned long chunk_size, zero;
> +
> +			zero = find_next_zero_bit(bmap, end, one + 1);


zero and one are unhelpful names unless they equal 0 and 1.
current/next?


> +			if (zero >= end)
> +				chunk_size = end - one;
> +			else
> +				chunk_size = zero - one;
> +
> +			if (chunk_size)
> +				add_one_chunk(vb, vq, PAGE_CHUNK_TYPE_BALLOON,
> +					      pfn_start + one, chunk_size);

Still not so what does a bit refer to? page or 4kbytes?
I think it should be a page.

> +			pos = one + chunk_size;
> +		} else
> +			break;
> +	}
> +}
> +



> +static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
> +{
> +	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_BALLOON_CHUNKS)) {
> +		int pfns, page_bmaps, i;
> +		unsigned long pfn_start, pfns_len;
> +
> +		pfn_start = vb->pfn_start;
> +		pfns = vb->pfn_stop - pfn_start + 1;
> +		pfns = roundup(roundup(pfns, BITS_PER_LONG),
> +			       PFNS_PER_PAGE_BMAP);
> +		page_bmaps = pfns / PFNS_PER_PAGE_BMAP;
> +		pfns_len = pfns / BITS_PER_BYTE;
> +
> +		for (i = 0; i < page_bmaps; i++) {
> +			unsigned int bmap_len = PAGE_BMAP_SIZE;
> +
> +			/* The last one takes the leftover only */

I don't understand what does this mean.

> +			if (i + 1 == page_bmaps)
> +				bmap_len = pfns_len - PAGE_BMAP_SIZE * i;
> +
> +			chunking_pages_from_bmap(vb, vq, pfn_start +
> +						 i * PFNS_PER_PAGE_BMAP,
> +						 vb->page_bmap[i], bmap_len);
> +		}
> +		if (vb->balloon_page_chunk_hdr->chunks > 0)
> +			send_page_chunks(vb, vq, PAGE_CHUNK_TYPE_BALLOON,
> +					 false);
> +	} else {
> +		struct scatterlist sg;
> +		unsigned int len;
>  
> -	/* When host has read buffer, this completes via balloon_ack */
> -	wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> +		sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
>  
> +		/*
> +		 * We should always be able to add one buffer to an empty
> +		 * queue.
> +		 */
> +		virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
> +		virtqueue_kick(vq);
> +
> +		/* When host has read buffer, this completes via balloon_ack */
> +		wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> +	}
>  }
>  
>  static void set_page_pfns(struct virtio_balloon *vb,
> @@ -131,20 +346,73 @@ static void set_page_pfns(struct virtio_balloon *vb,
>  {
>  	unsigned int i;
>  
> -	/* Set balloon pfns pointing at this page.
> -	 * Note that the first pfn points at start of the page. */
> +	/*
> +	 * Set balloon pfns pointing at this page.
> +	 * Note that the first pfn points at start of the page.
> +	 */
>  	for (i = 0; i < VIRTIO_BALLOON_PAGES_PER_PAGE; i++)
>  		pfns[i] = cpu_to_virtio32(vb->vdev,
>  					  page_to_balloon_pfn(page) + i);
>  }
>

Nice cleanup but pls split this out. This patch is big enough as it is.
  
> +static void set_page_bmap(struct virtio_balloon *vb,
> +			  struct list_head *pages, struct virtqueue *vq)
> +{
> +	unsigned long pfn_start, pfn_stop;
> +	struct page *page;
> +	bool found;
> +
> +	vb->pfn_min = rounddown(vb->pfn_min, BITS_PER_LONG);
> +	vb->pfn_max = roundup(vb->pfn_max, BITS_PER_LONG);
> +
> +	extend_page_bmap_size(vb, vb->pfn_max - vb->pfn_min + 1);

This might not do anything in particular might not cover the
given pfn range. Do we care? Why not?

> +	pfn_start = vb->pfn_min;
> +
> +	while (pfn_start < vb->pfn_max) {
> +		pfn_stop = pfn_start + PFNS_PER_PAGE_BMAP * vb->page_bmaps;
> +		pfn_stop = pfn_stop < vb->pfn_max ? pfn_stop : vb->pfn_max;
> +
> +		vb->pfn_start = pfn_start;
> +		clear_page_bmap(vb);
> +		found = false;
> +
> +		list_for_each_entry(page, pages, lru) {
> +			unsigned long bmap_idx, bmap_pos, balloon_pfn;
> +
> +			balloon_pfn = page_to_balloon_pfn(page);
> +			if (balloon_pfn < pfn_start || balloon_pfn > pfn_stop)
> +				continue;
> +			bmap_idx = (balloon_pfn - pfn_start) /
> +				   PFNS_PER_PAGE_BMAP;
> +			bmap_pos = (balloon_pfn - pfn_start) %
> +				   PFNS_PER_PAGE_BMAP;
> +			set_bit(bmap_pos, vb->page_bmap[bmap_idx]);

Looks like this will crash if bmap_idx is out of range or
if page_bmap allocation failed.

> +
> +			found = true;
> +		}
> +		if (found) {
> +			vb->pfn_stop = pfn_stop;
> +			tell_host(vb, vq);
> +		}
> +		pfn_start = pfn_stop;
> +	}
> +	free_extended_page_bmap(vb);
> +}
> +
>  static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  {
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	unsigned num_allocated_pages;
> +	bool chunking = virtio_has_feature(vb->vdev,
> +					   VIRTIO_BALLOON_F_BALLOON_CHUNKS);
>  
>  	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	if (chunking) {
> +		init_page_bmap_range(vb);
> +	} else {
> +		/* We can only do one array worth at a time. */
> +		num = min(num, ARRAY_SIZE(vb->pfns));
> +	}
>  
>  	mutex_lock(&vb->balloon_lock);
>  	for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -159,7 +427,10 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  			msleep(200);
>  			break;
>  		}
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (chunking)
> +			update_page_bmap_range(vb, page);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
>  		vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
>  		if (!virtio_has_feature(vb->vdev,
>  					VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> @@ -168,8 +439,13 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  
>  	num_allocated_pages = vb->num_pfns;
>  	/* Did we get any? */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->inflate_vq);
> +	if (vb->num_pfns != 0) {
> +		if (chunking)
> +			set_page_bmap(vb, &vb_dev_info->pages,
> +					vb->inflate_vq);
> +		else
> +			tell_host(vb, vb->inflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	return num_allocated_pages;
> @@ -195,6 +471,13 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	struct page *page;
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	LIST_HEAD(pages);
> +	bool chunking = virtio_has_feature(vb->vdev,
> +					   VIRTIO_BALLOON_F_BALLOON_CHUNKS);
> +	if (chunking)
> +		init_page_bmap_range(vb);
> +	else
> +		/* We can only do one array worth at a time. */
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	/* We can only do one array worth at a time. */
>  	num = min(num, ARRAY_SIZE(vb->pfns));
> @@ -208,6 +491,10 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  		if (!page)
>  			break;
>  		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (chunking)
> +			update_page_bmap_range(vb, page);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
>  		list_add(&page->lru, &pages);
>  		vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
>  	}
> @@ -218,8 +505,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	 * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
>  	 * is true, we *have* to do it in this order
>  	 */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->deflate_vq);
> +	if (vb->num_pfns != 0) {
> +		if (chunking)
> +			set_page_bmap(vb, &pages, vb->deflate_vq);
> +		else
> +			tell_host(vb, vb->deflate_vq);
> +	}
>  	release_pages_balloon(vb, &pages);
>  	mutex_unlock(&vb->balloon_lock);
>  	return num_freed_pages;
> @@ -431,6 +722,13 @@ static int init_vqs(struct virtio_balloon *vb)
>  }
>  
>  #ifdef CONFIG_BALLOON_COMPACTION
> +
> +static void tell_host_one_page(struct virtio_balloon *vb,
> +			       struct virtqueue *vq, struct page *page)
> +{
> +	add_one_chunk(vb, vq, PAGE_CHUNK_TYPE_BALLOON, page_to_pfn(page), 1);

This passes 4kbytes to host which seems wrong - I think you want a full page.

> +}
> +
>  /*
>   * virtballoon_migratepage - perform the balloon page migration on behalf of
>   *			     a compation thread.     (called under page lock)
> @@ -454,6 +752,8 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  {
>  	struct virtio_balloon *vb = container_of(vb_dev_info,
>  			struct virtio_balloon, vb_dev_info);
> +	bool chunking = virtio_has_feature(vb->vdev,
> +					   VIRTIO_BALLOON_F_BALLOON_CHUNKS);
>  	unsigned long flags;
>  
>  	/*
> @@ -475,16 +775,22 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  	vb_dev_info->isolated_pages--;
>  	__count_vm_event(BALLOON_MIGRATE);
>  	spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, newpage);
> -	tell_host(vb, vb->inflate_vq);
> -
> +	if (chunking) {
> +		tell_host_one_page(vb, vb->inflate_vq, newpage);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, newpage);
> +		tell_host(vb, vb->inflate_vq);
> +	}
>  	/* balloon's page migration 2nd step -- deflate "page" */
>  	balloon_page_delete(page);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, page);
> -	tell_host(vb, vb->deflate_vq);
> -
> +	if (chunking) {
> +		tell_host_one_page(vb, vb->deflate_vq, page);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, page);
> +		tell_host(vb, vb->deflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	put_page(page); /* balloon reference */
> @@ -511,6 +817,32 @@ static struct file_system_type balloon_fs = {
>  
>  #endif /* CONFIG_BALLOON_COMPACTION */
>  
> +static void balloon_page_chunk_init(struct virtio_balloon *vb)
> +{
> +	void *buf;
> +
> +	/*
> +	 * By default, we allocate page_bmap[0] only. More page_bmap will be
> +	 * allocated on demand.
> +	 */
> +	vb->page_bmap[0] = kmalloc(PAGE_BMAP_SIZE, GFP_KERNEL);
> +	buf = kmalloc(sizeof(struct virtio_balloon_page_chunk_hdr) +
> +		      sizeof(struct virtio_balloon_page_chunk) *
> +		      MAX_PAGE_CHUNKS, GFP_KERNEL);
> +	if (!vb->page_bmap[0] || !buf) {
> +		__virtio_clear_bit(vb->vdev, VIRTIO_BALLOON_F_BALLOON_CHUNKS);

this doesn't work as expected as features has been OK'd by then.
You want something like
validate_features that I posted. See
"virtio: allow drivers to validate features".

> +		kfree(vb->page_bmap[0]);

Looks like this will double free. you want to zero them I think.

> +		kfree(vb->balloon_page_chunk_hdr);
> +		dev_warn(&vb->vdev->dev, "%s: failed\n", __func__);
> +	} else {
> +		vb->page_bmaps = 1;
> +		vb->balloon_page_chunk_hdr = buf;
> +		vb->balloon_page_chunk_hdr->chunks = 0;
> +		vb->balloon_page_chunk = buf +
> +				sizeof(struct virtio_balloon_page_chunk_hdr);
> +	}
> +}
> +
>  static int virtballoon_probe(struct virtio_device *vdev)
>  {
>  	struct virtio_balloon *vb;
> @@ -533,6 +865,10 @@ static int virtballoon_probe(struct virtio_device *vdev)
>  	spin_lock_init(&vb->stop_update_lock);
>  	vb->stop_update = false;
>  	vb->num_pages = 0;
> +
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_BALLOON_CHUNKS))
> +		balloon_page_chunk_init(vb);
> +
>  	mutex_init(&vb->balloon_lock);
>  	init_waitqueue_head(&vb->acked);
>  	vb->vdev = vdev;
> @@ -609,6 +945,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
>  	cancel_work_sync(&vb->update_balloon_stats_work);
>  
>  	remove_common(vb);
> +	free_page_bmap(vb);
>  	if (vb->vb_dev_info.inode)
>  		iput(vb->vb_dev_info.inode);
>  	kfree(vb);
> @@ -649,6 +986,7 @@ static unsigned int features[] = {
>  	VIRTIO_BALLOON_F_MUST_TELL_HOST,
>  	VIRTIO_BALLOON_F_STATS_VQ,
>  	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> +	VIRTIO_BALLOON_F_BALLOON_CHUNKS,
>  };
>  
>  static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..be317b7 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,6 +34,7 @@
>  #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
>  #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
>  #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_BALLOON_CHUNKS 3 /* Inflate/Deflate pages in chunks */
>  
>  /* Size of a PFN in the balloon interface. */
>  #define VIRTIO_BALLOON_PFN_SHIFT 12
> @@ -82,4 +83,16 @@ struct virtio_balloon_stat {
>  	__virtio64 val;
>  } __attribute__((packed));
>  
> +struct virtio_balloon_page_chunk_hdr {
> +	/* Number of chunks in the payload */
> +	__le32 chunks;

You want to make this __le64 to align everything to 64 bit.

> +};
> +
> +#define VIRTIO_BALLOON_CHUNK_BASE_SHIFT 12
> +#define VIRTIO_BALLOON_CHUNK_SIZE_SHIFT 12
> +struct virtio_balloon_page_chunk {

so rename this virtio_balloon_page_chunk_entry

> +	__le64 base;
> +	__le64 size;
> +};
> +

And then:

struct virtio_balloon_page_chunk {
	struct virtio_balloon_page_chunk_hdr hdr;
	struct virtio_balloon_page_chunk_entry entries[];
};



>  #endif /* _LINUX_VIRTIO_BALLOON_H */
> -- 
> 2.7.4


[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]