OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [RFC PATCH v3 0/3] Enable virtio_net to act as a backup for a passthru device


On Wed, Feb 21, 2018 at 11:38 AM, Jiri Pirko <jiri@resnulli.us> wrote:
> Wed, Feb 21, 2018 at 06:56:35PM CET, alexander.duyck@gmail.com wrote:
>>On Wed, Feb 21, 2018 at 8:58 AM, Jiri Pirko <jiri@resnulli.us> wrote:
>>> Wed, Feb 21, 2018 at 05:49:49PM CET, alexander.duyck@gmail.com wrote:
>>>>On Wed, Feb 21, 2018 at 8:11 AM, Jiri Pirko <jiri@resnulli.us> wrote:
>>>>> Wed, Feb 21, 2018 at 04:56:48PM CET, alexander.duyck@gmail.com wrote:
>>>>>>On Wed, Feb 21, 2018 at 1:51 AM, Jiri Pirko <jiri@resnulli.us> wrote:
>>>>>>> Tue, Feb 20, 2018 at 11:33:56PM CET, kubakici@wp.pl wrote:
>>>>>>>>On Tue, 20 Feb 2018 21:14:10 +0100, Jiri Pirko wrote:
>>>>>>>>> Yeah, I can see it now :( I guess that the ship has sailed and we are
>>>>>>>>> stuck with this ugly thing forever...
>>>>>>>>>
>>>>>>>>> Could you at least make some common code that is shared in between
>>>>>>>>> netvsc and virtio_net so this is handled in exacly the same way in both?
>>>>>>>>
>>>>>>>>IMHO netvsc is a vendor specific driver which made a mistake on what
>>>>>>>>behaviour it provides (or tried to align itself with Windows SR-IOV).
>>>>>>>>Let's not make a far, far more commonly deployed and important driver
>>>>>>>>(virtio) bug-compatible with netvsc.
>>>>>>>
>>>>>>> Yeah. netvsc solution is a dangerous precedent here and in my opinition
>>>>>>> it was a huge mistake to merge it. I personally would vote to unmerge it
>>>>>>> and make the solution based on team/bond.
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>To Jiri's initial comments, I feel the same way, in fact I've talked to
>>>>>>>>the NetworkManager guys to get auto-bonding based on MACs handled in
>>>>>>>>user space.  I think it may very well get done in next versions of NM,
>>>>>>>>but isn't done yet.  Stephen also raised the point that not everybody is
>>>>>>>>using NM.
>>>>>>>
>>>>>>> Can be done in NM, networkd or other network management tools.
>>>>>>> Even easier to do this in teamd and let them all benefit.
>>>>>>>
>>>>>>> Actually, I took a stab to implement this in teamd. Took me like an hour
>>>>>>> and half.
>>>>>>>
>>>>>>> You can just run teamd with config option "kidnap" like this:
>>>>>>> # teamd/teamd -c '{"kidnap": true }'
>>>>>>>
>>>>>>> Whenever teamd sees another netdev to appear with the same mac as his,
>>>>>>> or whenever teamd sees another netdev to change mac to his,
>>>>>>> it enslaves it.
>>>>>>>
>>>>>>> Here's the patch (quick and dirty):
>>>>>>>
>>>>>>> Subject: [patch teamd] teamd: introduce kidnap feature
>>>>>>>
>>>>>>> Signed-off-by: Jiri Pirko <jiri@mellanox.com>
>>>>>>
>>>>>>So this doesn't really address the original problem we were trying to
>>>>>>solve. You asked earlier why the netdev name mattered and it mostly
>>>>>>has to do with configuration. Specifically what our patch is
>>>>>>attempting to resolve is the issue of how to allow a cloud provider to
>>>>>>upgrade their customer to SR-IOV support and live migration without
>>>>>>requiring them to reconfigure their guest. So the general idea with
>>>>>>our patch is to take a VM that is running with virtio_net only and
>>>>>>allow it to instead spawn a virtio_bypass master using the same netdev
>>>>>>name as the original virtio, and then have the virtio_net and VF come
>>>>>>up and be enslaved by the bypass interface. Doing it this way we can
>>>>>>allow for multi-vendor SR-IOV live migration support using a guest
>>>>>>that was originally configured for virtio only.
>>>>>>
>>>>>>The problem with your solution is we already have teaming and bonding
>>>>>>as you said. There is already a write-up from Red Hat on how to do it
>>>>>>(https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/html/virtual_machine_management_guide/sect-migrating_virtual_machines_between_hosts).
>>>>>>That is all well and good as long as you are willing to keep around
>>>>>>two VM images, one for virtio, and one for SR-IOV with live migration.
>>>>>
>>>>> You don't need 2 images. You need only one. The one with the team setup.
>>>>> That's it. If another netdev with the same mac appears, teamd will
>>>>> enslave it and run traffic on it. If not, ok, you'll go only through
>>>>> virtio_net.
>>>>
>>>>Isn't that going to cause the routing table to get messed up when we
>>>>rearrange the netdevs? We don't want to have an significant disruption
>>>> in traffic when we are adding/removing the VF. It seems like we would
>>>>need to invalidate any entries that were configured for the virtio_net
>>>>and reestablish them on the new team interface. Part of the criteria
>>>>we have been working with is that we should be able to transition from
>>>>having a VF to not or vice versa without seeing any significant
>>>>disruption in the traffic.
>>>
>>> What? You have routes on the team netdev. virtio_net and VF are only
>>> slaves. What are you talking about? I don't get it :/
>>
>>So lets walk though this by example. The general idea of the base case
>>for all this is somebody starting with virtio_net, we will call the
>>interface "ens1" for now. It comes up and is assigned a dhcp address
>>and everything works as expected. Now in order to get better
>>performance we want to add a VF "ens2", but we don't want a new IP
>>address. Now if I understand correctly what will happen is that when
>>"ens2" appears on the system teamd will then create a new team
>>interface "team0". Before teamd can enslave ens1 it has to down the
>
> No, you don't understand that correctly.
>
> There is always ens1 and team0. ens1 is a slave of team0. team0 is the
> interface to use, to set ip on etc.
>
> When ens2 appears, it gets enslaved to team0 as well.
>
>
>>interface if I understand things correctly. This means that we have to
>>disrupt network traffic in order for this to work.
>>
>>To give you an idea of where we were before this became about trying
>>to do this in the team or bonding driver, we were debating a 2 netdev
>>model versus a 3 netdev model. I will call out the model and the
>>advantages/disadvantages of those below.
>>
>>2 Netdev model, "ens1", enslaves "ens2".
>>- Requires dropping in-driver XDP in order to work (won't capture VF
>>traffic otherwise)
>>- VF takes performance hit for extra qdisc/Tx queue lock of virtio_net interface
>>- If you ass-u-me (I haven't been a fan of this model if you can't
>>tell) that it is okay to rip out in-driver XDP from virtio_net, then
>>you could transition between base virtio, virtio w/ backup bit set.
>>- Works for netvsc because they limit their features (no in-driver
>>XDP) to guarantee this works.
>>
>>3 Netdev model, "ens1", enslaves "ens1nbackup" and "ens2"
>>- Exposes 2 netdevs "ens1" and "ens1nbackup" when only virtio is present
>>- No extra qdisc or locking
>>- All virtio_net original functionality still present
>>- Not able to transition from virtio to virtio w/ backup without
>>disruption (requires hot-plug)
>>
>>The way I see it the only way your team setup could work would be
>>something closer to the 3 netdev model. Basically we would be
>>requiring the user to always have the team0 present in order to make
>>certain that anything like XDP would be run on the team interface
>>instead of assuming that the virtio_net could run by itself. I will
>>add it as a third option here to compare to the other 2.
>
> Yes.
>
>
>>
>>3 Netdev "team" model, "team0", enslaves "ens1" and "ens2"
>>- Requires guest to configure teamd
>>- Exposes "team0" and "ens1" when only virtio is present
>>- No extra qdisc or locking
>>- Doesn't require "backup" bit in virtio
>>
>>>>
>>>>Also how does this handle any static configuration? I am assuming that
>>>>everything here assumes the team will be brought up as soon as it is
>>>>seen and assigned a DHCP address.
>>>
>>> Again. You configure whatever you need on the team netdev.
>>
>>Just so we are clear, are you then saying that the team0 interface
>>will always be present with this configuration? You had made it sound
>
> Of course.
>
>
>>like it would disappear if you didn't have at least 2 interfaces.
>
> Where did I make it sound like that? No.

I think it was a bit of misspeak/misread specifically I am thinking of:
  You don't need 2 images. You need only one. The one with the
  team setup. That's it. If another netdev with the same mac appears,
  teamd will enslave it and run traffic on it. If not, ok, you'll go only
  through virtio_net.

I read that as there being no team if the VF wasn't present since you
would still be going through team and then virtio_net otherwise.

>
>>
>>>>
>>>>The solution as you have proposed seems problematic at best. I don't
>>>>see how the team solution works without introducing some sort of
>>>>traffic disruption to either add/remove the VF and bring up/tear down
>>>>the team interface. At that point we might as well just give up on
>>>>this piece of live migration support entirely since the disruption was
>>>>what we were trying to avoid. We might as well just hotplug out the VF
>>>>and hotplug in a virtio at the same bus device and function number and
>>>>just let udev take care of renaming it for us. The idea was supposed
>>>>to be a seamless transition between the two interfaces.
>>>
>>> Alex. What you are trying to do in this patchset and what netvsc does it
>>> essentialy in-driver bonding. Same thing mechanism, rx_handler,
>>> everything. I don't really understand what are you talking about. With
>>> use of team you will get exactly the same behaviour.
>>
>>So the goal of the "in-driver bonding" is to make the bonding as
>>non-intrusive as possible and require as little user intervention as
>>possible. I agree that much of the handling is the same, however the
>>control structure and requirements are significantly different. That
>>has been what I have been trying to explain. You keep wanting to use
>>the existing structures, but they don't really apply cleanly because
>>they push control for the interface up into the guest, and that
>>doesn't make much sense in the case of virtualization. What is
>>happening here is that we are exposing a bond that the guest should
>>have no control over, or at least as little as possible. In addition
>>making the user have to add additional configuration in the guest
>>means that there is that much more that can go wrong if they screw it
>>up.
>>
>>The other problem here is that the transition needs to be as seamless
>>as possible between just a standard virtio_net setup and this new
>>setup. With either the team or bonding setup you end up essentially
>>forcing the guest to have the bond/team always there even if they are
>>running only a single interface. Only if they "upgrade" the VM by
>>adding a VF then it finally gets to do anything.
>
> Yeah. There is certainly a dilemma. We have to choose between
> 1) weird and hackish in-driver semi-bonding that would be simple
>    for user.
> 2) the standard way that would be perhaps slighly more complicated
>    for user.

The problem is for us option 2 is quite a bit uglier. Basically it
means essentially telling all the distros and such that their cloud
images have to use team by default on all virtio_net interfaces. It
pretty much means we have to throw away this as a possible solution
since you are requiring guest changes that most customers/OS vendors
would ever accept.

At least with our solution it was the driver making use of the
functionality if a given feature bit was set. The teaming solution as
proposed doesn't even give us that option.

>>
>>What this comes down to for us is the following requirements:
>>1. The name of the interface cannot change when going from virtio_net,
>>to virtio_net being bypassed using a VF. We cannot create an interface
>>on top of the interface, if anything we need to push the original
>>virtio_net out of the way so that the new team interface takes its
>>place in the configuration of the system. Otherwise a VM with VF w/
>>live migration will require a different configuration than one that
>>just runs virtio_net.
>
> Team driver netdev is still the same, no name changes.

Right. Basically we need to have the renaming occur so that any
existing config gets moved to the upper interface instead of having to
rely on configuration being adjusted for the team interface.

>>2. We need some way to signal if this VM should be running in an
>>"upgraded" mode or not. We have been using the backup bit in
>>virtio_net to do that. If it isn't "upgraded" then we don't need the
>>team/bond and we can just run with virtio_net.
>
> I don't see why the team cannot be there always.

It is more the logistical nightmare. Part of the goal here was to work
with the cloud base images that are out there such as
https://alt.fedoraproject.org/cloud/. With just the kernel changes the
overhead for this stays fairly small and would be pulled in as just a
standard part of the kernel update process. The virtio bypass only
pops up if the backup bit is present. With the team solution it
requires that the base image use the team driver on virtio_net when it
sees one. I doubt the OSVs would want to do that just because SR-IOV
isn't that popular of a case.

>>3. We cannot introduce any downtime on the interface when adding a VF
>>or removing it. The link must stay up the entire time and be able to
>>handle packets.
>
> Sure. That should be handled by the team. Whenever the VF netdev
> disappears, traffic would switch over to the virtio_net. The benefit of
> your in-driver bonding solution is that qemu can actually signal the
> guest driver that the disappearance would happen and do the switch a bit
> earlier. But that is something that might be implemented in a different
> channel where the kernel might get notification that certain pci is
> going to disappear so everyone could prepare. Just an idea.

The signaling isn't too much of an issue since we can just tweak the
link state of the VF or virtio manually to report the link up or down
prior to the hot-plug. Now that we are on the same page with the team0
interface always being there, I don't think 3 is much of a concern
with the solution as you proposed.


[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]