OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: [PATCH v2 1/3] scripts/update-linux-headers: add ethtool.h and update to 4.16.0-rc4


A subsequent patch to add support for setting linkspeed/duplex in
virtio-net, requires a few definitions from ethtool.h, which ends up
pulling in kernel.h and sysinfo.h as well.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
---
 include/standard-headers/linux/ethtool.h | 1821 ++++++++++++++++++++++++++++++
 include/standard-headers/linux/input.h   |    4 +-
 include/standard-headers/linux/kernel.h  |   15 +
 include/standard-headers/linux/sysinfo.h |   25 +
 linux-headers/asm-x86/kvm_para.h         |    1 +
 linux-headers/linux/kvm.h                |    2 +
 scripts/update-linux-headers.sh          |   11 +-
 7 files changed, 1876 insertions(+), 3 deletions(-)
 create mode 100644 include/standard-headers/linux/ethtool.h
 create mode 100644 include/standard-headers/linux/kernel.h
 create mode 100644 include/standard-headers/linux/sysinfo.h

diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h
new file mode 100644
index 0000000..94aacb7
--- /dev/null
+++ b/include/standard-headers/linux/ethtool.h
@@ -0,0 +1,1821 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+#include "net/eth.h"
+
+#include "standard-headers/linux/kernel.h"
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/if_ether.h"
+
+#include <limits.h> /* for INT_MAX */
+
+/* All structures exposed to userland should be defined such that they
+ * have the same layout for 32-bit and 64-bit userland.
+ */
+
+/**
+ * struct ethtool_cmd - DEPRECATED, link control and status
+ * This structure is DEPRECATED, please use struct ethtool_link_settings.
+ * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
+ * @supported: Bitmask of %SUPPORTED_* flags for the link modes,
+ *	physical connectors and other link features for which the
+ *	interface supports autonegotiation or auto-detection.
+ *	Read-only.
+ * @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
+ *	physical connectors and other link features that are
+ *	advertised through autonegotiation or enabled for
+ *	auto-detection.
+ * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ *	applicable.  For clause 45 PHYs this is the PRTAD.
+ * @transceiver: Historically used to distinguish different possible
+ *	PHY types, but not in a consistent way.  Deprecated.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ *	either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ *	protocols supported by the interface; 0 if unknown.
+ *	Read-only.
+ * @maxtxpkt: Historically used to report TX IRQ coalescing; now
+ *	obsoleted by &struct ethtool_coalesce.  Read-only; deprecated.
+ * @maxrxpkt: Historically used to report RX IRQ coalescing; now
+ *	obsoleted by &struct ethtool_coalesce.  Read-only; deprecated.
+ * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ *	%ETH_TP_MDI_*.  If the status is unknown or not applicable, the
+ *	value will be %ETH_TP_MDI_INVALID.  Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ *	%ETH_TP_MDI_*.  If MDI(-X) control is not implemented, reads
+ *	yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ *	When written successfully, the link should be renegotiated if
+ *	necessary.
+ * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
+ *	and other link features that the link partner advertised
+ *	through autonegotiation; 0 if unknown or not applicable.
+ *	Read-only.
+ *
+ * The link speed in Mbps is split between @speed and @speed_hi.  Use
+ * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
+ * access it.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes.  If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted.  For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver.  They should use
+ * %ETHTOOL_GSET to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SSET.
+ *
+ * Drivers that implement set_settings() should validate all fields
+ * other than @cmd that are not described as read-only or deprecated,
+ * and must ignore all fields described as read-only.
+ *
+ * Deprecated fields should be ignored by both users and drivers.
+ */
+struct ethtool_cmd {
+	uint32_t	cmd;
+	uint32_t	supported;
+	uint32_t	advertising;
+	uint16_t	speed;
+	uint8_t	duplex;
+	uint8_t	port;
+	uint8_t	phy_address;
+	uint8_t	transceiver;
+	uint8_t	autoneg;
+	uint8_t	mdio_support;
+	uint32_t	maxtxpkt;
+	uint32_t	maxrxpkt;
+	uint16_t	speed_hi;
+	uint8_t	eth_tp_mdix;
+	uint8_t	eth_tp_mdix_ctrl;
+	uint32_t	lp_advertising;
+	uint32_t	reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+					 uint32_t speed)
+{
+	ep->speed = (uint16_t)(speed & 0xFFFF);
+	ep->speed_hi = (uint16_t)(speed >> 16);
+}
+
+static inline uint32_t ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in "standard-headers/linux/mii.h".  This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22	1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in "standard-headers/linux/mii.h" and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45	2
+
+#define ETHTOOL_FWVERS_LEN	32
+#define ETHTOOL_BUSINFO_LEN	32
+#define ETHTOOL_EROMVERS_LEN	32
+
+/**
+ * struct ethtool_drvinfo - general driver and device information
+ * @cmd: Command number = %ETHTOOL_GDRVINFO
+ * @driver: Driver short name.  This should normally match the name
+ *	in its bus driver structure (e.g. pci_driver::name).  Must
+ *	not be an empty string.
+ * @version: Driver version string; may be an empty string
+ * @fw_version: Firmware version string; may be an empty string
+ * @erom_version: Expansion ROM version string; may be an empty string
+ * @bus_info: Device bus address.  This should match the dev_name()
+ *	string for the underlying bus device, if there is one.  May be
+ *	an empty string.
+ * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
+ *	%ETHTOOL_SPFLAGS commands; also the number of strings in the
+ *	%ETH_SS_PRIV_FLAGS set
+ * @n_stats: Number of uint64_t statistics returned by the %ETHTOOL_GSTATS
+ *	command; also the number of strings in the %ETH_SS_STATS set
+ * @testinfo_len: Number of results returned by the %ETHTOOL_TEST
+ *	command; also the number of strings in the %ETH_SS_TEST set
+ * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
+ *	and %ETHTOOL_SEEPROM commands, in bytes
+ * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
+ *	command, in bytes
+ *
+ * Users can use the %ETHTOOL_GSSET_INFO command to get the number of
+ * strings in any string set (from Linux 2.6.34).
+ *
+ * Drivers should set at most @driver, @version, @fw_version and
+ * @bus_info in their get_drvinfo() implementation.  The ethtool
+ * core fills in the other fields using other driver operations.
+ */
+struct ethtool_drvinfo {
+	uint32_t	cmd;
+	char	driver[32];
+	char	version[32];
+	char	fw_version[ETHTOOL_FWVERS_LEN];
+	char	bus_info[ETHTOOL_BUSINFO_LEN];
+	char	erom_version[ETHTOOL_EROMVERS_LEN];
+	char	reserved2[12];
+	uint32_t	n_priv_flags;
+	uint32_t	n_stats;
+	uint32_t	testinfo_len;
+	uint32_t	eedump_len;
+	uint32_t	regdump_len;
+};
+
+#define SOPASS_MAX	6
+
+/**
+ * struct ethtool_wolinfo - Wake-On-Lan configuration
+ * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL
+ * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes.
+ *	Read-only.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE
+ *	is set in @wolopts.
+ */
+struct ethtool_wolinfo {
+	uint32_t	cmd;
+	uint32_t	supported;
+	uint32_t	wolopts;
+	uint8_t	sopass[SOPASS_MAX];
+};
+
+/* for passing single values */
+struct ethtool_value {
+	uint32_t	cmd;
+	uint32_t	data;
+};
+
+enum tunable_id {
+	ETHTOOL_ID_UNSPEC,
+	ETHTOOL_RX_COPYBREAK,
+	ETHTOOL_TX_COPYBREAK,
+	/*
+	 * Add your fresh new tubale attribute above and remember to update
+	 * tunable_strings[] in net/core/ethtool.c
+	 */
+	__ETHTOOL_TUNABLE_COUNT,
+};
+
+enum tunable_type_id {
+	ETHTOOL_TUNABLE_UNSPEC,
+	ETHTOOL_TUNABLE_U8,
+	ETHTOOL_TUNABLE_U16,
+	ETHTOOL_TUNABLE_U32,
+	ETHTOOL_TUNABLE_U64,
+	ETHTOOL_TUNABLE_STRING,
+	ETHTOOL_TUNABLE_S8,
+	ETHTOOL_TUNABLE_S16,
+	ETHTOOL_TUNABLE_S32,
+	ETHTOOL_TUNABLE_S64,
+};
+
+struct ethtool_tunable {
+	uint32_t	cmd;
+	uint32_t	id;
+	uint32_t	type_id;
+	uint32_t	len;
+	void	*data[0];
+};
+
+#define DOWNSHIFT_DEV_DEFAULT_COUNT	0xff
+#define DOWNSHIFT_DEV_DISABLE		0
+
+enum phy_tunable_id {
+	ETHTOOL_PHY_ID_UNSPEC,
+	ETHTOOL_PHY_DOWNSHIFT,
+	/*
+	 * Add your fresh new phy tunable attribute above and remember to update
+	 * phy_tunable_strings[] in net/core/ethtool.c
+	 */
+	__ETHTOOL_PHY_TUNABLE_COUNT,
+};
+
+/**
+ * struct ethtool_regs - hardware register dump
+ * @cmd: Command number = %ETHTOOL_GREGS
+ * @version: Dump format version.  This is driver-specific and may
+ *	distinguish different chips/revisions.  Drivers must use new
+ *	version numbers whenever the dump format changes in an
+ *	incompatible way.
+ * @len: On entry, the real length of @data.  On return, the number of
+ *	bytes used.
+ * @data: Buffer for the register dump
+ *
+ * Users should use %ETHTOOL_GDRVINFO to find the maximum length of
+ * a register dump for the interface.  They must allocate the buffer
+ * immediately following this structure.
+ */
+struct ethtool_regs {
+	uint32_t	cmd;
+	uint32_t	version;
+	uint32_t	len;
+	uint8_t	data[0];
+};
+
+/**
+ * struct ethtool_eeprom - EEPROM dump
+ * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or
+ *	%ETHTOOL_SEEPROM
+ * @magic: A 'magic cookie' value to guard against accidental changes.
+ *	The value passed in to %ETHTOOL_SEEPROM must match the value
+ *	returned by %ETHTOOL_GEEPROM for the same device.  This is
+ *	unused when @cmd is %ETHTOOL_GMODULEEEPROM.
+ * @offset: Offset within the EEPROM to begin reading/writing, in bytes
+ * @len: On entry, number of bytes to read/write.  On successful
+ *	return, number of bytes actually read/written.  In case of
+ *	error, this may indicate at what point the error occurred.
+ * @data: Buffer to read/write from
+ *
+ * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find
+ * the length of an on-board or module EEPROM, respectively.  They
+ * must allocate the buffer immediately following this structure.
+ */
+struct ethtool_eeprom {
+	uint32_t	cmd;
+	uint32_t	magic;
+	uint32_t	offset;
+	uint32_t	len;
+	uint8_t	data[0];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ *	for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ *	advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ *	combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ *	that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ *	its tx lpi (after reaching 'idle' state). Effective only when eee
+ *	was negotiated and tx_lpi_enabled was set.
+ */
+struct ethtool_eee {
+	uint32_t	cmd;
+	uint32_t	supported;
+	uint32_t	advertised;
+	uint32_t	lp_advertised;
+	uint32_t	eee_active;
+	uint32_t	eee_enabled;
+	uint32_t	tx_lpi_enabled;
+	uint32_t	tx_lpi_timer;
+	uint32_t	reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+	uint32_t   cmd;
+	uint32_t   type;
+	uint32_t   eeprom_len;
+	uint32_t   reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ *	a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ *	before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ *	a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ *	before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ *	statistics block updates.  Some drivers do not have an
+ *	in-memory statistic block, and in such cases this value is
+ *	ignored.  This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ *	a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ *	a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ *	sampling, measured in seconds.  Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies that interrupts
+ * should be coalesced until
+ *	(usecs > 0 && time_since_first_completion >= usecs) ||
+ *	(max_frames > 0 && completed_frames >= max_frames)
+ *
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated.  To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition time_since_first_completion >= usecs
+ *
+ * This is deprecated.  Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates.  Some drivers only implement
+ * one of RX or TX adaptive coalescing.  Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+	uint32_t	cmd;
+	uint32_t	rx_coalesce_usecs;
+	uint32_t	rx_max_coalesced_frames;
+	uint32_t	rx_coalesce_usecs_irq;
+	uint32_t	rx_max_coalesced_frames_irq;
+	uint32_t	tx_coalesce_usecs;
+	uint32_t	tx_max_coalesced_frames;
+	uint32_t	tx_coalesce_usecs_irq;
+	uint32_t	tx_max_coalesced_frames_irq;
+	uint32_t	stats_block_coalesce_usecs;
+	uint32_t	use_adaptive_rx_coalesce;
+	uint32_t	use_adaptive_tx_coalesce;
+	uint32_t	pkt_rate_low;
+	uint32_t	rx_coalesce_usecs_low;
+	uint32_t	rx_max_coalesced_frames_low;
+	uint32_t	tx_coalesce_usecs_low;
+	uint32_t	tx_max_coalesced_frames_low;
+	uint32_t	pkt_rate_high;
+	uint32_t	rx_coalesce_usecs_high;
+	uint32_t	rx_max_coalesced_frames_high;
+	uint32_t	tx_coalesce_usecs_high;
+	uint32_t	tx_max_coalesced_frames_high;
+	uint32_t	rate_sample_interval;
+};
+
+/**
+ * struct ethtool_ringparam - RX/TX ring parameters
+ * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM
+ * @rx_max_pending: Maximum supported number of pending entries per
+ *	RX ring.  Read-only.
+ * @rx_mini_max_pending: Maximum supported number of pending entries
+ *	per RX mini ring.  Read-only.
+ * @rx_jumbo_max_pending: Maximum supported number of pending entries
+ *	per RX jumbo ring.  Read-only.
+ * @tx_max_pending: Maximum supported number of pending entries per
+ *	TX ring.  Read-only.
+ * @rx_pending: Current maximum number of pending entries per RX ring
+ * @rx_mini_pending: Current maximum number of pending entries per RX
+ *	mini ring
+ * @rx_jumbo_pending: Current maximum number of pending entries per RX
+ *	jumbo ring
+ * @tx_pending: Current maximum supported number of pending entries
+ *	per TX ring
+ *
+ * If the interface does not have separate RX mini and/or jumbo rings,
+ * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0.
+ *
+ * There may also be driver-dependent minimum values for the number
+ * of entries per ring.
+ */
+struct ethtool_ringparam {
+	uint32_t	cmd;
+	uint32_t	rx_max_pending;
+	uint32_t	rx_mini_max_pending;
+	uint32_t	rx_jumbo_max_pending;
+	uint32_t	tx_max_pending;
+	uint32_t	rx_pending;
+	uint32_t	rx_mini_pending;
+	uint32_t	rx_jumbo_pending;
+	uint32_t	tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	uint32_t	cmd;
+	uint32_t	max_rx;
+	uint32_t	max_tx;
+	uint32_t	max_other;
+	uint32_t	max_combined;
+	uint32_t	rx_count;
+	uint32_t	tx_count;
+	uint32_t	other_count;
+	uint32_t	combined_count;
+};
+
+/**
+ * struct ethtool_pauseparam - Ethernet pause (flow control) parameters
+ * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM
+ * @autoneg: Flag to enable autonegotiation of pause frame use
+ * @rx_pause: Flag to enable reception of pause frames
+ * @tx_pause: Flag to enable transmission of pause frames
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ * If the link is autonegotiated, drivers should use
+ * mii_advertise_flowctrl() or similar code to set the advertised
+ * pause frame capabilities based on the @rx_pause and @tx_pause flags,
+ * even if @autoneg is zero.  They should also allow the advertised
+ * pause frame capabilities to be controlled directly through the
+ * advertising field of &struct ethtool_cmd.
+ *
+ * If @autoneg is non-zero, the MAC is configured to send and/or
+ * receive pause frames according to the result of autonegotiation.
+ * Otherwise, it is configured directly based on the @rx_pause and
+ * @tx_pause flags.
+ */
+struct ethtool_pauseparam {
+	uint32_t	cmd;
+	uint32_t	autoneg;
+	uint32_t	rx_pause;
+	uint32_t	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+
+/**
+ * enum ethtool_stringset - string set ID
+ * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST
+ * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS
+ * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with
+ *	%ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS
+ * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE;
+ *	now deprecated
+ * @ETH_SS_FEATURES: Device feature names
+ * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names
+ * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS
+ * @ETH_SS_PHY_TUNABLES: PHY tunable names
+ */
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,
+	ETH_SS_FEATURES,
+	ETH_SS_RSS_HASH_FUNCS,
+	ETH_SS_TUNABLES,
+	ETH_SS_PHY_STATS,
+	ETH_SS_PHY_TUNABLES,
+};
+
+/**
+ * struct ethtool_gstrings - string set for data tagging
+ * @cmd: Command number = %ETHTOOL_GSTRINGS
+ * @string_set: String set ID; one of &enum ethtool_stringset
+ * @len: On return, the number of strings in the string set
+ * @data: Buffer for strings.  Each string is null-padded to a size of
+ *	%ETH_GSTRING_LEN.
+ *
+ * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in
+ * the string set.  They must allocate a buffer of the appropriate
+ * size immediately following this structure.
+ */
+struct ethtool_gstrings {
+	uint32_t	cmd;
+	uint32_t	string_set;
+	uint32_t	len;
+	uint8_t	data[0];
+};
+
+/**
+ * struct ethtool_sset_info - string set information
+ * @cmd: Command number = %ETHTOOL_GSSET_INFO
+ * @sset_mask: On entry, a bitmask of string sets to query, with bits
+ *	numbered according to &enum ethtool_stringset.  On return, a
+ *	bitmask of those string sets queried that are supported.
+ * @data: Buffer for string set sizes.  On return, this contains the
+ *	size of each string set that was queried and supported, in
+ *	order of ID.
+ *
+ * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on
+ * return @sset_mask == 0x6 (sets 1, 2).  Then @data[0] contains the
+ * size of set 1 and @data[1] contains the size of set 2.
+ *
+ * Users must allocate a buffer of the appropriate size (4 * number of
+ * sets queried) immediately following this structure.
+ */
+struct ethtool_sset_info {
+	uint32_t	cmd;
+	uint32_t	reserved;
+	uint64_t	sset_mask;
+	uint32_t	data[0];
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ *	only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ *	test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),
+	ETH_TEST_FL_FAILED	= (1 << 1),
+	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
+	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
+};
+
+/**
+ * struct ethtool_test - device self-test invocation
+ * @cmd: Command number = %ETHTOOL_TEST
+ * @flags: A bitmask of flags from &enum ethtool_test_flags.  Some
+ *	flags may be set by the user on entry; others may be set by
+ *	the driver on return.
+ * @len: On return, the number of test results
+ * @data: Array of test results
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of test results that will be returned.  They must allocate a
+ * buffer of the appropriate size (8 * number of results) immediately
+ * following this structure.
+ */
+struct ethtool_test {
+	uint32_t	cmd;
+	uint32_t	flags;
+	uint32_t	reserved;
+	uint32_t	len;
+	uint64_t	data[0];
+};
+
+/**
+ * struct ethtool_stats - device-specific statistics
+ * @cmd: Command number = %ETHTOOL_GSTATS
+ * @n_stats: On return, the number of statistics
+ * @data: Array of statistics
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of statistics that will be returned.  They must allocate a
+ * buffer of the appropriate size (8 * number of statistics)
+ * immediately following this structure.
+ */
+struct ethtool_stats {
+	uint32_t	cmd;
+	uint32_t	n_stats;
+	uint64_t	data[0];
+};
+
+/**
+ * struct ethtool_perm_addr - permanent hardware address
+ * @cmd: Command number = %ETHTOOL_GPERMADDR
+ * @size: On entry, the size of the buffer.  On return, the size of the
+ *	address.  The command fails if the buffer is too small.
+ * @data: Buffer for the address
+ *
+ * Users must allocate the buffer immediately following this structure.
+ * A buffer size of %MAX_ADDR_LEN should be sufficient for any address
+ * type.
+ */
+struct ethtool_perm_addr {
+	uint32_t	cmd;
+	uint32_t	size;
+	uint8_t	data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
+	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
+	ETH_FLAG_RXHASH		= (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+	uint32_t	ip4src;
+	uint32_t	ip4dst;
+	uint16_t	psrc;
+	uint16_t	pdst;
+	uint8_t    tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+	uint32_t	ip4src;
+	uint32_t	ip4dst;
+	uint32_t	spi;
+	uint8_t    tos;
+};
+
+#define	ETH_RX_NFC_IP4	1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+	uint32_t	ip4src;
+	uint32_t	ip4dst;
+	uint32_t	l4_4_bytes;
+	uint8_t    tos;
+	uint8_t    ip_ver;
+	uint8_t    proto;
+};
+
+/**
+ * struct ethtool_tcpip6_spec - flow specification for TCP/IPv6 etc.
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tclass: Traffic Class
+ *
+ * This can be used to specify a TCP/IPv6, UDP/IPv6 or SCTP/IPv6 flow.
+ */
+struct ethtool_tcpip6_spec {
+	uint32_t	ip6src[4];
+	uint32_t	ip6dst[4];
+	uint16_t	psrc;
+	uint16_t	pdst;
+	uint8_t    tclass;
+};
+
+/**
+ * struct ethtool_ah_espip6_spec - flow specification for IPsec/IPv6
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @spi: Security parameters index
+ * @tclass: Traffic Class
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv6.
+ */
+struct ethtool_ah_espip6_spec {
+	uint32_t	ip6src[4];
+	uint32_t	ip6dst[4];
+	uint32_t	spi;
+	uint8_t    tclass;
+};
+
+/**
+ * struct ethtool_usrip6_spec - general flow specification for IPv6
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tclass: Traffic Class
+ * @l4_proto: Transport protocol number (nexthdr after any Extension Headers)
+ */
+struct ethtool_usrip6_spec {
+	uint32_t	ip6src[4];
+	uint32_t	ip6dst[4];
+	uint32_t	l4_4_bytes;
+	uint8_t    tclass;
+	uint8_t    l4_proto;
+};
+
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethtool_tcpip6_spec		tcp_ip6_spec;
+	struct ethtool_tcpip6_spec		udp_ip6_spec;
+	struct ethtool_tcpip6_spec		sctp_ip6_spec;
+	struct ethtool_ah_espip6_spec		ah_ip6_spec;
+	struct ethtool_ah_espip6_spec		esp_ip6_spec;
+	struct ethtool_usrip6_spec		usr_ip6_spec;
+	struct eth_header				ether_spec;
+	uint8_t					hdata[52];
+};
+
+/**
+ * struct ethtool_flow_ext - additional RX flow fields
+ * @h_dest: destination MAC address
+ * @vlan_etype: VLAN EtherType
+ * @vlan_tci: VLAN tag control information
+ * @data: user defined data
+ *
+ * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT
+ * is set in &struct ethtool_rx_flow_spec @flow_type.
+ * @h_dest is valid if %FLOW_MAC_EXT is set.
+ */
+struct ethtool_flow_ext {
+	uint8_t		padding[2];
+	unsigned char	h_dest[ETH_ALEN];
+	uint16_t		vlan_etype;
+	uint16_t		vlan_tci;
+	uint32_t		data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT or %FLOW_MAC_EXT flag
+ *	(see &struct ethtool_flow_ext description).
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ *	if packets should be discarded
+ * @location: Location of rule in the table.  Locations must be
+ *	numbered such that a flow matching multiple rules will be
+ *	classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+	uint32_t		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	uint64_t		ring_cookie;
+	uint32_t		location;
+};
+
+/* How rings are layed out when accessing virtual functions or
+ * offloaded queues is device specific. To allow users to do flow
+ * steering and specify these queues the ring cookie is partitioned
+ * into a 32bit queue index with an 8 bit virtual function id.
+ * This also leaves the 3bytes for further specifiers. It is possible
+ * future devices may support more than 256 virtual functions if
+ * devices start supporting PCIe w/ARI. However at the moment I
+ * do not know of any devices that support this so I do not reserve
+ * space for this at this time. If a future patch consumes the next
+ * byte it should be aware of this possiblity.
+ */
+#define ETHTOOL_RX_FLOW_SPEC_RING	0x00000000FFFFFFFFLL
+#define ETHTOOL_RX_FLOW_SPEC_RING_VF	0x000000FF00000000LL
+#define ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF 32
+static inline uint64_t ethtool_get_flow_spec_ring(uint64_t ring_cookie)
+{
+	return ETHTOOL_RX_FLOW_SPEC_RING & ring_cookie;
+};
+
+static inline uint64_t ethtool_get_flow_spec_ring_vf(uint64_t ring_cookie)
+{
+	return (ETHTOOL_RX_FLOW_SPEC_RING_VF & ring_cookie) >>
+				ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
+};
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.  If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values.  If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry.  On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules.  Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
+ * @fs.@location is the actual rule location.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows.  The special
+ * values are %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority).  Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+	uint32_t				cmd;
+	uint32_t				flow_type;
+	uint64_t				data;
+	struct ethtool_rx_flow_spec	fs;
+	uint32_t				rule_cnt;
+	uint32_t				rule_locs[0];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ *	indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values.  This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+	uint32_t	cmd;
+	uint32_t	size;
+	uint32_t	ring_index[0];
+};
+
+/**
+ * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key.
+ * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH
+ * @rss_context: RSS context identifier.
+ * @indir_size: On entry, the array size of the user buffer for the
+ *	indirection table, which may be zero, or (for %ETHTOOL_SRSSH),
+ *	%ETH_RXFH_INDIR_NO_CHANGE.  On return from %ETHTOOL_GRSSH,
+ *	the array size of the hardware indirection table.
+ * @key_size: On entry, the array size of the user buffer for the hash key,
+ *	which may be zero.  On return from %ETHTOOL_GRSSH, the size of the
+ *	hardware hash key.
+ * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
+ *	Valid values are one of the %ETH_RSS_HASH_*.
+ * @rsvd:	Reserved for future extensions.
+ * @rss_config: RX ring/queue index for each hash value i.e., indirection table
+ *	of @indir_size uint32_t elements, followed by hash key of @key_size
+ *	bytes.
+ *
+ * For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the
+ * size should be returned.  For %ETHTOOL_SRSSH, an @indir_size of
+ * %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested
+ * and a @indir_size of zero means the indir table should be reset to default
+ * values. An hfunc of zero means that hash function setting is not requested.
+ */
+struct ethtool_rxfh {
+	uint32_t   cmd;
+	uint32_t	rss_context;
+	uint32_t   indir_size;
+	uint32_t   key_size;
+	uint8_t	hfunc;
+	uint8_t	rsvd8[3];
+	uint32_t	rsvd32;
+	uint32_t   rss_config[0];
+};
+#define ETH_RXFH_INDIR_NO_CHANGE	0xffffffff
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+	uint32_t		 flow_type;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		struct eth_header				ether_spec;
+		uint8_t					hdata[72];
+	} h_u, m_u;
+
+	uint16_t	        vlan_tag;
+	uint16_t	        vlan_tag_mask;
+	uint64_t		data;
+	uint64_t		data_mask;
+
+	int32_t		action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+	uint32_t					cmd;
+	struct ethtool_rx_ntuple_flow_spec	fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME	128
+enum ethtool_flash_op_type {
+	ETHTOOL_FLASH_ALL_REGIONS	= 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+	uint32_t	cmd;
+	uint32_t	region;
+	char	data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ *        get and filled in by ethtool for set operation.
+ *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ *        firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+	uint32_t	cmd;
+	uint32_t	version;
+	uint32_t	flag;
+	uint32_t	len;
+	uint8_t	data[0];
+};
+
+#define ETH_FW_DUMP_DISABLE 0
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+	uint32_t	available;
+	uint32_t	requested;
+	uint32_t	active;
+	uint32_t	never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: On entry, the number of elements in the features[] array;
+ *	on return, the number of elements in features[] needed to hold
+ *	all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+	uint32_t	cmd;
+	uint32_t	size;
+	struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+	uint32_t	valid;
+	uint32_t	requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+	uint32_t	cmd;
+	uint32_t	size;
+	struct ethtool_set_features_block features[0];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ *
+ * Drivers should only report the filters they actually support without
+ * upscaling in the SIOCSHWTSTAMP ioctl. If the SIOCSHWSTAMP request for
+ * HWTSTAMP_FILTER_V1_SYNC is supported by HWTSTAMP_FILTER_V1_EVENT, then the
+ * driver should only report HWTSTAMP_FILTER_V1_EVENT in this op.
+ */
+struct ethtool_ts_info {
+	uint32_t	cmd;
+	uint32_t	so_timestamping;
+	int32_t	phc_index;
+	uint32_t	tx_types;
+	uint32_t	tx_reserved[3];
+	uint32_t	rx_filters;
+	uint32_t	rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ *	those bits were ignored.
+ *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ *      resulting state of bits masked by .valid is not equal to .requested.
+ *      Probably there are other device-specific constraints on some features
+ *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ *      here as though ignored bits were cleared.
+ *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ *      compatibility functions. Requested offload state cannot be properly
+ *      managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+	ETHTOOL_F_UNSUPPORTED__BIT,
+	ETHTOOL_F_WISH__BIT,
+	ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
+
+#define MAX_NUM_QUEUE		4096
+
+/**
+ * struct ethtool_per_queue_op - apply sub command to the queues in mask.
+ * @cmd: ETHTOOL_PERQUEUE
+ * @sub_command: the sub command which apply to each queues
+ * @queue_mask: Bitmap of the queues which sub command apply to
+ * @data: A complete command structure following for each of the queues addressed
+ */
+struct ethtool_per_queue_op {
+	uint32_t	cmd;
+	uint32_t	sub_command;
+	uint32_t	queue_mask[__KERNEL_DIV_ROUND_UP(MAX_NUM_QUEUE, 32)];
+	char	data[];
+};
+
+/**
+ * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters
+ * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM
+ * @active_fec: FEC mode which is active on porte
+ * @fec: Bitmask of supported/configured FEC modes
+ * @rsvd: Reserved for future extensions. i.e FEC bypass feature.
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ */
+struct ethtool_fecparam {
+	uint32_t   cmd;
+	/* bitmask of FEC modes */
+	uint32_t   active_fec;
+	uint32_t   fec;
+	uint32_t   reserved;
+};
+
+/**
+ * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration
+ * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported
+ * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver
+ * @ETHTOOL_FEC_OFF: No FEC Mode
+ * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode
+ * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode
+ */
+enum ethtool_fec_config_bits {
+	ETHTOOL_FEC_NONE_BIT,
+	ETHTOOL_FEC_AUTO_BIT,
+	ETHTOOL_FEC_OFF_BIT,
+	ETHTOOL_FEC_RS_BIT,
+	ETHTOOL_FEC_BASER_BIT,
+};
+
+#define ETHTOOL_FEC_NONE		(1 << ETHTOOL_FEC_NONE_BIT)
+#define ETHTOOL_FEC_AUTO		(1 << ETHTOOL_FEC_AUTO_BIT)
+#define ETHTOOL_FEC_OFF			(1 << ETHTOOL_FEC_OFF_BIT)
+#define ETHTOOL_FEC_RS			(1 << ETHTOOL_FEC_RS_BIT)
+#define ETHTOOL_FEC_BASER		(1 << ETHTOOL_FEC_BASER_BIT)
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* DEPRECATED, Get settings.
+					    * Please use ETHTOOL_GLINKSETTINGS
+					    */
+#define ETHTOOL_SSET		0x00000002 /* DEPRECATED, Set settings.
+					    * Please use ETHTOOL_SLINKSETTINGS
+					    */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
+
+#define ETHTOOL_GRSSH		0x00000046 /* Get RX flow hash configuration */
+#define ETHTOOL_SRSSH		0x00000047 /* Set RX flow hash configuration */
+#define ETHTOOL_GTUNABLE	0x00000048 /* Get tunable configuration */
+#define ETHTOOL_STUNABLE	0x00000049 /* Set tunable configuration */
+#define ETHTOOL_GPHYSTATS	0x0000004a /* get PHY-specific statistics */
+
+#define ETHTOOL_PERQUEUE	0x0000004b /* Set per queue options */
+
+#define ETHTOOL_GLINKSETTINGS	0x0000004c /* Get ethtool_link_settings */
+#define ETHTOOL_SLINKSETTINGS	0x0000004d /* Set ethtool_link_settings */
+#define ETHTOOL_PHY_GTUNABLE	0x0000004e /* Get PHY tunable configuration */
+#define ETHTOOL_PHY_STUNABLE	0x0000004f /* Set PHY tunable configuration */
+#define ETHTOOL_GFECPARAM	0x00000050 /* Get FEC settings */
+#define ETHTOOL_SFECPARAM	0x00000051 /* Set FEC settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Link mode bit indices */
+enum ethtool_link_mode_bit_indices {
+	ETHTOOL_LINK_MODE_10baseT_Half_BIT	= 0,
+	ETHTOOL_LINK_MODE_10baseT_Full_BIT	= 1,
+	ETHTOOL_LINK_MODE_100baseT_Half_BIT	= 2,
+	ETHTOOL_LINK_MODE_100baseT_Full_BIT	= 3,
+	ETHTOOL_LINK_MODE_1000baseT_Half_BIT	= 4,
+	ETHTOOL_LINK_MODE_1000baseT_Full_BIT	= 5,
+	ETHTOOL_LINK_MODE_Autoneg_BIT		= 6,
+	ETHTOOL_LINK_MODE_TP_BIT		= 7,
+	ETHTOOL_LINK_MODE_AUI_BIT		= 8,
+	ETHTOOL_LINK_MODE_MII_BIT		= 9,
+	ETHTOOL_LINK_MODE_FIBRE_BIT		= 10,
+	ETHTOOL_LINK_MODE_BNC_BIT		= 11,
+	ETHTOOL_LINK_MODE_10000baseT_Full_BIT	= 12,
+	ETHTOOL_LINK_MODE_Pause_BIT		= 13,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT	= 14,
+	ETHTOOL_LINK_MODE_2500baseX_Full_BIT	= 15,
+	ETHTOOL_LINK_MODE_Backplane_BIT		= 16,
+	ETHTOOL_LINK_MODE_1000baseKX_Full_BIT	= 17,
+	ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT	= 18,
+	ETHTOOL_LINK_MODE_10000baseKR_Full_BIT	= 19,
+	ETHTOOL_LINK_MODE_10000baseR_FEC_BIT	= 20,
+	ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT = 21,
+	ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT	= 22,
+	ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT	= 23,
+	ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT	= 24,
+	ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT	= 25,
+	ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT	= 26,
+	ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT	= 27,
+	ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT	= 28,
+	ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT	= 29,
+	ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT	= 30,
+	ETHTOOL_LINK_MODE_25000baseCR_Full_BIT	= 31,
+	ETHTOOL_LINK_MODE_25000baseKR_Full_BIT	= 32,
+	ETHTOOL_LINK_MODE_25000baseSR_Full_BIT	= 33,
+	ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT	= 34,
+	ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT	= 35,
+	ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT	= 36,
+	ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT	= 37,
+	ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT	= 38,
+	ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT	= 39,
+	ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT		= 40,
+	ETHTOOL_LINK_MODE_1000baseX_Full_BIT	= 41,
+	ETHTOOL_LINK_MODE_10000baseCR_Full_BIT	= 42,
+	ETHTOOL_LINK_MODE_10000baseSR_Full_BIT	= 43,
+	ETHTOOL_LINK_MODE_10000baseLR_Full_BIT	= 44,
+	ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT	= 45,
+	ETHTOOL_LINK_MODE_10000baseER_Full_BIT	= 46,
+	ETHTOOL_LINK_MODE_2500baseT_Full_BIT	= 47,
+	ETHTOOL_LINK_MODE_5000baseT_Full_BIT	= 48,
+
+	ETHTOOL_LINK_MODE_FEC_NONE_BIT	= 49,
+	ETHTOOL_LINK_MODE_FEC_RS_BIT	= 50,
+	ETHTOOL_LINK_MODE_FEC_BASER_BIT	= 51,
+
+	/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
+	 * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
+	 * macro for bits > 31. The only way to use indices > 31 is to
+	 * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
+	 */
+
+	__ETHTOOL_LINK_MODE_LAST
+	  = ETHTOOL_LINK_MODE_FEC_BASER_BIT,
+};
+
+#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name)	\
+	(1UL << (ETHTOOL_LINK_MODE_ ## base_name ## _BIT))
+
+/* DEPRECATED macros. Please migrate to
+ * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
+ * define any new SUPPORTED_* macro for bits > 31.
+ */
+#define SUPPORTED_10baseT_Half		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
+#define SUPPORTED_10baseT_Full		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
+#define SUPPORTED_100baseT_Half		__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
+#define SUPPORTED_100baseT_Full		__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
+#define SUPPORTED_1000baseT_Half	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
+#define SUPPORTED_1000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
+#define SUPPORTED_Autoneg		__ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
+#define SUPPORTED_TP			__ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
+#define SUPPORTED_AUI			__ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
+#define SUPPORTED_MII			__ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
+#define SUPPORTED_FIBRE			__ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
+#define SUPPORTED_BNC			__ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
+#define SUPPORTED_10000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
+#define SUPPORTED_Pause			__ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
+#define SUPPORTED_Asym_Pause		__ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
+#define SUPPORTED_2500baseX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
+#define SUPPORTED_Backplane		__ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
+#define SUPPORTED_1000baseKX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
+#define SUPPORTED_10000baseKX4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
+#define SUPPORTED_10000baseKR_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
+#define SUPPORTED_10000baseR_FEC	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
+#define SUPPORTED_20000baseMLD2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
+#define SUPPORTED_20000baseKR2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
+#define SUPPORTED_40000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
+#define SUPPORTED_40000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
+#define SUPPORTED_40000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
+#define SUPPORTED_40000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
+#define SUPPORTED_56000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
+#define SUPPORTED_56000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
+#define SUPPORTED_56000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
+#define SUPPORTED_56000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
+/* Please do not define any new SUPPORTED_* macro for bits > 31, see
+ * notice above.
+ */
+
+/*
+ * DEPRECATED macros. Please migrate to
+ * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
+ * define any new ADERTISE_* macro for bits > 31.
+ */
+#define ADVERTISED_10baseT_Half		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
+#define ADVERTISED_10baseT_Full		__ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
+#define ADVERTISED_100baseT_Half	__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
+#define ADVERTISED_100baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
+#define ADVERTISED_1000baseT_Half	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
+#define ADVERTISED_1000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
+#define ADVERTISED_Autoneg		__ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
+#define ADVERTISED_TP			__ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
+#define ADVERTISED_AUI			__ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
+#define ADVERTISED_MII			__ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
+#define ADVERTISED_FIBRE		__ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
+#define ADVERTISED_BNC			__ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
+#define ADVERTISED_10000baseT_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
+#define ADVERTISED_Pause		__ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
+#define ADVERTISED_Asym_Pause		__ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
+#define ADVERTISED_2500baseX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
+#define ADVERTISED_Backplane		__ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
+#define ADVERTISED_1000baseKX_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
+#define ADVERTISED_10000baseKX4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
+#define ADVERTISED_10000baseKR_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
+#define ADVERTISED_10000baseR_FEC	__ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
+#define ADVERTISED_20000baseMLD2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
+#define ADVERTISED_20000baseKR2_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
+#define ADVERTISED_40000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
+#define ADVERTISED_40000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
+#define ADVERTISED_40000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
+#define ADVERTISED_40000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
+#define ADVERTISED_56000baseKR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
+#define ADVERTISED_56000baseCR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
+#define ADVERTISED_56000baseSR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
+#define ADVERTISED_56000baseLR4_Full	__ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
+/* Please do not define any new ADVERTISED_* macro for bits > 31, see
+ * notice above.
+ */
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+ * Update drivers/net/phy/phy.c:phy_speed_to_str() and
+ * drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values.
+ */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define SPEED_5000		5000
+#define SPEED_10000		10000
+#define SPEED_14000		14000
+#define SPEED_20000		20000
+#define SPEED_25000		25000
+#define SPEED_40000		40000
+#define SPEED_50000		50000
+#define SPEED_56000		56000
+#define SPEED_100000		100000
+
+#define SPEED_UNKNOWN		-1
+
+static inline int ethtool_validate_speed(uint32_t speed)
+{
+	return speed <= INT_MAX || speed == SPEED_UNKNOWN;
+}
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
+
+static inline int ethtool_validate_duplex(uint8_t duplex)
+{
+	switch (duplex) {
+	case DUPLEX_HALF:
+	case DUPLEX_FULL:
+	case DUPLEX_UNKNOWN:
+		return 1;
+	}
+
+	return 0;
+}
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
+#define PORT_OTHER		0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00 /* PHY and MAC are in the same package */
+#define XCVR_EXTERNAL		0x01 /* PHY and MAC are in different packages */
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation. */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
+#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
+#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
+#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
+#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
+#define	AH_ESP_V4_FLOW	0x04	/* hash only */
+#define	TCP_V6_FLOW	0x05	/* hash or spec (tcp_ip6_spec; nfc only) */
+#define	UDP_V6_FLOW	0x06	/* hash or spec (udp_ip6_spec; nfc only) */
+#define	SCTP_V6_FLOW	0x07	/* hash or spec (sctp_ip6_spec; nfc only) */
+#define	AH_ESP_V6_FLOW	0x08	/* hash only */
+#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
+#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
+#define	AH_V6_FLOW	0x0b	/* hash or spec (ah_ip6_spec; nfc only) */
+#define	ESP_V6_FLOW	0x0c	/* hash or spec (esp_ip6_spec; nfc only) */
+#define	IPV4_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
+#define	IP_USER_FLOW	IPV4_USER_FLOW
+#define	IPV6_USER_FLOW	0x0e	/* spec only (usr_ip6_spec; nfc only) */
+#define	IPV4_FLOW	0x10	/* hash only */
+#define	IPV6_FLOW	0x11	/* hash only */
+#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
+#define	FLOW_MAC_EXT	0x40000000
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
+#define RX_CLS_LOC_ANY		0xffffffff
+#define RX_CLS_LOC_FIRST	0xfffffffe
+#define RX_CLS_LOC_LAST		0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079		0x1
+#define ETH_MODULE_SFF_8079_LEN		256
+#define ETH_MODULE_SFF_8472		0x2
+#define ETH_MODULE_SFF_8472_LEN		512
+#define ETH_MODULE_SFF_8636		0x3
+#define ETH_MODULE_SFF_8636_LEN		256
+#define ETH_MODULE_SFF_8436		0x4
+#define ETH_MODULE_SFF_8436_LEN		256
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+	ETH_RESET_AP		= 1 << 8,	/* Application processor */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
+
+/**
+ * struct ethtool_link_settings - link control and status
+ *
+ * IMPORTANT, Backward compatibility notice: When implementing new
+ *	user-space tools, please first try %ETHTOOL_GLINKSETTINGS, and
+ *	if it succeeds use %ETHTOOL_SLINKSETTINGS to change link
+ *	settings; do not use %ETHTOOL_SSET if %ETHTOOL_GLINKSETTINGS
+ *	succeeded: stick to %ETHTOOL_GLINKSETTINGS/%SLINKSETTINGS in
+ *	that case.  Conversely, if %ETHTOOL_GLINKSETTINGS fails, use
+ *	%ETHTOOL_GSET to query and %ETHTOOL_SSET to change link
+ *	settings; do not use %ETHTOOL_SLINKSETTINGS if
+ *	%ETHTOOL_GLINKSETTINGS failed: stick to
+ *	%ETHTOOL_GSET/%ETHTOOL_SSET in that case.
+ *
+ * @cmd: Command number = %ETHTOOL_GLINKSETTINGS or %ETHTOOL_SLINKSETTINGS
+ * @speed: Link speed (Mbps)
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ *	applicable.  For clause 45 PHYs this is the PRTAD.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ *	either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ *	protocols supported by the interface; 0 if unknown.
+ *	Read-only.
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ *	%ETH_TP_MDI_*.  If the status is unknown or not applicable, the
+ *	value will be %ETH_TP_MDI_INVALID.  Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ *	%ETH_TP_MDI_*.  If MDI(-X) control is not implemented, reads
+ *	yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ *	When written successfully, the link should be renegotiated if
+ *	necessary.
+ * @link_mode_masks_nwords: Number of 32-bit words for each of the
+ *	supported, advertising, lp_advertising link mode bitmaps. For
+ *	%ETHTOOL_GLINKSETTINGS: on entry, number of words passed by user
+ *	(>= 0); on return, if handshake in progress, negative if
+ *	request size unsupported by kernel: absolute value indicates
+ *	kernel expected size and all the other fields but cmd
+ *	are 0; otherwise (handshake completed), strictly positive
+ *	to indicate size used by kernel and cmd field stays
+ *	%ETHTOOL_GLINKSETTINGS, all other fields populated by driver. For
+ *	%ETHTOOL_SLINKSETTINGS: must be valid on entry, ie. a positive
+ *	value returned previously by %ETHTOOL_GLINKSETTINGS, otherwise
+ *	refused. For drivers: ignore this field (use kernel's
+ *	__ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
+ *	be overwritten by kernel.
+ * @supported: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features for which the interface
+ *	supports autonegotiation or auto-detection.  Read-only.
+ * @advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features that are advertised through
+ *	autonegotiation or enabled for auto-detection.
+ * @lp_advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, and other
+ *	link features that the link partner advertised through
+ *	autonegotiation; 0 if unknown or not applicable.  Read-only.
+ * @transceiver: Used to distinguish different possible PHY types,
+ *	reported consistently by PHYLIB.  Read-only.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes.  If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted.  For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt
+ * are not available in %ethtool_link_settings. Until all drivers are
+ * converted to ignore them or to the new %ethtool_link_settings API,
+ * for both queries and changes, users should always try
+ * %ETHTOOL_GLINKSETTINGS first, and if it fails with -ENOTSUPP stick
+ * only to %ETHTOOL_GSET and %ETHTOOL_SSET consistently. If it
+ * succeeds, then users should stick to %ETHTOOL_GLINKSETTINGS and
+ * %ETHTOOL_SLINKSETTINGS (which would support drivers implementing
+ * either %ethtool_cmd or %ethtool_link_settings).
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver.  They should use
+ * %ETHTOOL_GLINKSETTINGS to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SLINKSETTINGS.
+ *
+ * Drivers that implement %get_link_ksettings and/or
+ * %set_link_ksettings should ignore the @cmd
+ * and @link_mode_masks_nwords fields (any change to them overwritten
+ * by kernel), and rely only on kernel's internal
+ * %__ETHTOOL_LINK_MODE_MASK_NBITS and
+ * %ethtool_link_mode_mask_t. Drivers that implement
+ * %set_link_ksettings() should validate all fields other than @cmd
+ * and @link_mode_masks_nwords that are not described as read-only or
+ * deprecated, and must ignore all fields described as read-only.
+ */
+struct ethtool_link_settings {
+	uint32_t	cmd;
+	uint32_t	speed;
+	uint8_t	duplex;
+	uint8_t	port;
+	uint8_t	phy_address;
+	uint8_t	autoneg;
+	uint8_t	mdio_support;
+	uint8_t	eth_tp_mdix;
+	uint8_t	eth_tp_mdix_ctrl;
+	int8_t	link_mode_masks_nwords;
+	uint8_t	transceiver;
+	uint8_t	reserved1[3];
+	uint32_t	reserved[7];
+	uint32_t	link_mode_masks[0];
+	/* layout of link_mode_masks fields:
+	 * uint32_t map_supported[link_mode_masks_nwords];
+	 * uint32_t map_advertising[link_mode_masks_nwords];
+	 * uint32_t map_lp_advertising[link_mode_masks_nwords];
+	 */
+};
+#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/standard-headers/linux/input.h b/include/standard-headers/linux/input.h
index 939b627..6d6128c 100644
--- a/include/standard-headers/linux/input.h
+++ b/include/standard-headers/linux/input.h
@@ -28,8 +28,8 @@ struct input_event {
 #define input_event_sec time.tv_sec
 #define input_event_usec time.tv_usec
 #else
-	__kernel_ulong_t __sec;
-	__kernel_ulong_t __usec;
+	unsigned long __sec;
+	unsigned long __usec;
 #define input_event_sec  __sec
 #define input_event_usec __usec
 #endif
diff --git a/include/standard-headers/linux/kernel.h b/include/standard-headers/linux/kernel.h
new file mode 100644
index 0000000..1eeba2e
--- /dev/null
+++ b/include/standard-headers/linux/kernel.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_KERNEL_H
+#define _LINUX_KERNEL_H
+
+#include "standard-headers/linux/sysinfo.h"
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+
+#endif /* _LINUX_KERNEL_H */
diff --git a/include/standard-headers/linux/sysinfo.h b/include/standard-headers/linux/sysinfo.h
new file mode 100644
index 0000000..e3c06ac
--- /dev/null
+++ b/include/standard-headers/linux/sysinfo.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_SYSINFO_H
+#define _LINUX_SYSINFO_H
+
+#include "standard-headers/linux/types.h"
+
+#define SI_LOAD_SHIFT	16
+struct sysinfo {
+	long uptime;		/* Seconds since boot */
+	unsigned long loads[3];	/* 1, 5, and 15 minute load averages */
+	unsigned long totalram;	/* Total usable main memory size */
+	unsigned long freeram;	/* Available memory size */
+	unsigned long sharedram;	/* Amount of shared memory */
+	unsigned long bufferram;	/* Memory used by buffers */
+	unsigned long totalswap;	/* Total swap space size */
+	unsigned long freeswap;	/* swap space still available */
+	uint16_t procs;		   	/* Number of current processes */
+	uint16_t pad;		   	/* Explicit padding for m68k */
+	unsigned long totalhigh;	/* Total high memory size */
+	unsigned long freehigh;	/* Available high memory size */
+	uint32_t mem_unit;			/* Memory unit size in bytes */
+	char _f[20-2*sizeof(unsigned long)-sizeof(uint32_t)];	/* Padding: libc5 uses this.. */
+};
+
+#endif /* _LINUX_SYSINFO_H */
diff --git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h
index dc1ae08..4c58184 100644
--- a/linux-headers/asm-x86/kvm_para.h
+++ b/linux-headers/asm-x86/kvm_para.h
@@ -26,6 +26,7 @@
 #define KVM_FEATURE_PV_EOI		6
 #define KVM_FEATURE_PV_UNHALT		7
 #define KVM_FEATURE_PV_TLB_FLUSH	9
+#define KVM_FEATURE_ASYNC_PF_VMEXIT	10
 
 /* The last 8 bits are used to indicate how to interpret the flags field
  * in pvclock structure. If no bits are set, all flags are ignored.
diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index aed2230..a167be8 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -761,6 +761,7 @@ struct kvm_ppc_resize_hpt {
 #define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
 #define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
 #define KVM_GET_EMULATED_CPUID	  _IOWR(KVMIO, 0x09, struct kvm_cpuid2)
+#define KVM_GET_MSR_FEATURE_INDEX_LIST    _IOWR(KVMIO, 0x0a, struct kvm_msr_list)
 
 /*
  * Extension capability list.
@@ -934,6 +935,7 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_S390_AIS_MIGRATION 150
 #define KVM_CAP_PPC_GET_CPU_CHAR 151
 #define KVM_CAP_S390_BPB 152
+#define KVM_CAP_GET_MSR_FEATURES 153
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
index 9767172..849ba84 100755
--- a/scripts/update-linux-headers.sh
+++ b/scripts/update-linux-headers.sh
@@ -39,6 +39,9 @@ cp_portable() {
                                      -e 'input-event-codes' \
                                      -e 'sys/' \
                                      -e 'pvrdma_verbs' \
+                                     -e 'limits' \
+                                     -e 'linux/kernel' \
+                                     -e 'linux/sysinfo' \
                                      > /dev/null
     then
         echo "Unexpected #include in input file $f".
@@ -60,6 +63,10 @@ cp_portable() {
         -e '/sys\/ioctl.h/d' \
         -e 's/SW_MAX/SW_MAX_/' \
         -e 's/atomic_t/int/' \
+        -e 's/__kernel_long_t/long/' \
+        -e 's/__kernel_ulong_t/unsigned long/' \
+        -e 's/struct ethhdr/struct eth_header/' \
+        -e '/\#define _LINUX_ETHTOOL_H/a \\n\#include "net/eth.h"' \
         "$f" > "$to/$header";
 }
 
@@ -149,7 +156,9 @@ rm -rf "$output/include/standard-headers/linux"
 mkdir -p "$output/include/standard-headers/linux"
 for i in "$tmpdir"/include/linux/*virtio*.h "$tmpdir/include/linux/input.h" \
          "$tmpdir/include/linux/input-event-codes.h" \
-         "$tmpdir/include/linux/pci_regs.h"; do
+         "$tmpdir/include/linux/pci_regs.h" \
+         "$tmpdir/include/linux/ethtool.h" "$tmpdir/include/linux/kernel.h" \
+         "$tmpdir/include/linux/sysinfo.h"; do
     cp_portable "$i" "$output/include/standard-headers/linux"
 done
 
-- 
2.7.4



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]