OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]

Subject: [PATCH v2 1/2] content: net: Add VIRTIO_NET_F_CTRL_STEERING_MODE feature

From: Sameeh Jubran <sameeh.j@gmail.com>

This commit introduces steering mode into network device. Steering
mode is a general infrastructure for various steering modes that can
be implemented on top of it such as Automatic and RSS.

Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
 content.tex | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/content.tex b/content.tex
index c840588..3d538e8 100644
--- a/content.tex
+++ b/content.tex
@@ -3115,6 +3115,9 @@ features.
 \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
+\item[VIRTIO_NET_F_CTRL_STEERING_MODE(27)] Device supports configurable steering
+    mode.
 \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device / Feature bits / Feature bit requirements}
@@ -3317,6 +3320,8 @@ struct virtio_net_hdr {
         le16 csum_start;
         le16 csum_offset;
         le16 num_buffers;
+// Only if VIRTIO_NET_F_CTRL_STEERING_MODE has been negotiated
+        le64 hash;
@@ -4007,6 +4012,60 @@ VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command.
 The device MUST NOT queue packets on receive queues greater than
 \field{virtqueue_pairs} once it has placed the VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command in the used ring.
+\paragraph{Steering mode}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Steering mode}
+// steering mode flags
+#define STEERING_MODE_AUTO          1
+struct virtio_net_steering_modes {
+le32 steering_modes;
+struct virtio_net_steering_mode {
+le32 steering_mode;
+le32 command;
+    union {
+    }
+#define VIRTIO_NET_CTRL_STEERING_MODE                7
+#define VIRTIO_NET_CTRL_SM_CONTROL                    1
+If the VIRTIO_NET_F_CTRL_STEERING_MODE is negotiated the driver can send control commands for the
+configuring the steering mode. There are multiple steering modes and they can be configured using
+the VIRTIO_NET_CTRL_SM_CONTROL command. Each mode has it's own set of commands.
+The auto steering mode is the default mode if nothing else has been configured by the driver
+and the VIRTIO_NET_F_CTRL_STEERING_MODE feature is acked by the driver.
+The class VIRTIO_NET_CTRL_STEERING_MODE has two commands:
+\item VIRTIO_NET_CTRL_SM_GET_SUPPORTED_MODES is used for getting the supported steering modes by the device.
+	The command should be executed by the driver before attempting to configure the steering mode. Once the device
+	receives this command it should fill the virtio_net_steering_modes structure with the supported steering mode
+	flags.
+\item The command VIRTIO_NET_CTRL_SM_CONTROL is used for controlling the different steering modes. Each steering mode
+	has its own set of commands. When executing this command the structure virtio_net_steering_mode should be used as follows:
+	the \field{steering_mode} should be filled with one of the steering mode flags along with an appropriate command from the chosen
+	steering mode. The union of virtio_net_steering_mode should be used and filled as the mode's command suggests.
+If this feature has been negotiated, the virtio header has an additional
+\field{hash} field attached to it.
+\subparagraph{Automatic Receive Steering}{Device Types / Network Device / Device Operation / Control Virtqueue / Steering mode / Automatic Receive Steering}
+This is the default steering mode, please refer to the "Automatic receive steering in multiqueue" section.
 \subparagraph{Legacy Interface: Automatic receive steering in multiqueue mode}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode / Legacy Interface: Automatic receive steering in multiqueue mode}
 When using the legacy interface, transitional devices and drivers
 MUST format \field{virtqueue_pairs}

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]