[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [virtio-dev] [PATCH v4] content: Introduce VIRTIO_NET_F_STANDBY feature
On 11/28/2018 12:06 PM, Michael S. Tsirkin wrote:
I'm seriously doubtful that legacy Intel NIC hardware can do that instead of mucking around with software workaround in the PF driver. Actually, the same applies to other NIC vendors when hardware sees duplicate filters. There's no such control of precedence on one over the other.On Wed, Nov 28, 2018 at 10:39:55AM -0800, Samudrala, Sridhar wrote:On 11/28/2018 9:35 AM, Michael S. Tsirkin wrote:On Wed, Nov 28, 2018 at 09:31:32AM -0800, Samudrala, Sridhar wrote:On 11/28/2018 9:08 AM, Michael S. Tsirkin wrote:On Mon, Nov 26, 2018 at 12:22:56PM -0800, Samudrala, Sridhar wrote:Update: I have just set the vf mac's address to 0 (ip link set ens2f0 vf 1 mac 00:00:00:00:00:00) after unplugging it (the primary device) and the pings started working again on the failover interface. So it seems like the frames were arriving to the vf on the host.Yes. When the VF is unplugged, you need to reset the VFs MAC so that the packets with VMs MAC start flowing via VF, bridge and the virtio interface. Have you looked at this documentation that shows a sample script to initiate live migration? https://www.kernel.org/doc/html/latest/networking/net_failover.html -SridharInteresting I didn't notice it does this. So in fact just defining VF mac will immediately divert packets to the VF? Given guest driver did not initialize VF yet won't a bunch of packets be dropped?There is typo in my stmt above (VF->PF) When the VF is unplugged, you need to reset the VFs MAC so that the packets with VMs MAC start flowing via PF, bridge and the virtio interface. When the VF is plugged in, ideally the MAC filter for the VF should be added to the HW once the guest driver comes up and can receive packets. Currently with intel drivers, the filter gets added to HW as soon as the host admin sets the VFs MAC via ndo_set_vf_mac() api. So potentially there could be packet drops until the VF driver comes up in the VM.Can this be fixed in the intel drivers?I just checked and it looks like this seems to have been addressed in the ice 100Gb driver. Will bring this up issue internally to see if we can change this behavior in i40e/ixgbe drivers.Also what happens if the mac is programmed both in PF (e.g. with macvtap) and VF? Ideally VF will take precedence.