OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [PATCH v3 2/3] virtio-net: Introduce RSS receive steering feature


On Mon, Mar 02, 2020 at 12:58:34PM +0200, Yuri Benditovich wrote:
> All the classes of commands are defined without indentation.
> All the commands are defined with indentation of 1 space.
> Only the last one (VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET at the end of
> the file) does not have an indentation.

OK then, sorry about the noise.

> On Mon, Mar 2, 2020 at 12:54 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > On Mon, Mar 02, 2020 at 10:53:14AM +0200, Yuri Benditovich wrote:
> > > On Sun, Mar 1, 2020 at 9:58 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > > >
> > > > On Sun, Mar 01, 2020 at 04:33:01PM +0200, Yuri Benditovich wrote:
> > > > > RSS (Receive-side scaling) defines hash calculation
> > > > > rules and decision on receive virtqueue according to
> > > > > the calculated hash, provided mask to apply and
> > > > > provided indirection table containing indices of
> > > > > receive virqueues. The driver sends the control
> > > > > command to enable multiqueue and provide parameters
> > > > > for receive steering.
> > > > >
> > > > > Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
> > > > > ---
> > > > >  include/uapi/linux/virtio_net.h | 42 +++++++++++++++++++++++++++++++--
> > > > >  1 file changed, 40 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
> > > > > index 19e76b3e3a64..188ad3eecdc8 100644
> > > > > --- a/include/uapi/linux/virtio_net.h
> > > > > +++ b/include/uapi/linux/virtio_net.h
> > > > > @@ -57,6 +57,7 @@
> > > > >                                        * Steering */
> > > > >  #define VIRTIO_NET_F_CTRL_MAC_ADDR 23        /* Set MAC address */
> > > > >
> > > > > +#define VIRTIO_NET_F_RSS       60    /* Supports RSS RX steering */
> > > > >  #define VIRTIO_NET_F_RSC_EXT   61    /* extended coalescing info */
> > > > >  #define VIRTIO_NET_F_STANDBY   62    /* Act as standby for another device
> > > > >                                        * with the same MAC.
> > > > > @@ -70,6 +71,17 @@
> > > > >  #define VIRTIO_NET_S_LINK_UP 1       /* Link is up */
> > > > >  #define VIRTIO_NET_S_ANNOUNCE        2       /* Announcement is needed */
> > > > >
> > > > > +/* supported/enabled hash types */
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_IPv4          (1 << 0)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_TCPv4         (1 << 1)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_UDPv4         (1 << 2)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_IPv6          (1 << 3)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_TCPv6         (1 << 4)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_UDPv6         (1 << 5)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_IP_EX         (1 << 6)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_TCP_EX        (1 << 7)
> > > > > +#define VIRTIO_NET_RSS_HASH_TYPE_UDP_EX        (1 << 8)
> > > > > +
> > > > >  struct virtio_net_config {
> > > > >       /* The config defining mac address (if VIRTIO_NET_F_MAC) */
> > > > >       __u8 mac[ETH_ALEN];
> > > > > @@ -93,6 +105,12 @@ struct virtio_net_config {
> > > > >        * Any other value stands for unknown.
> > > > >        */
> > > > >       __u8 duplex;
> > > > > +     /* maximum size of RSS key */
> > > > > +     __u8 rss_max_key_size;
> > > > > +     /* maximum number of indirection table entries */
> > > > > +     __le16 rss_max_indirection_table_length;
> > > > > +     /* bitmask of supported VIRTIO_NET_RSS_HASH_ types */
> > > > > +     __le32 supported_hash_types;
> > > > >  } __attribute__((packed));
> > > > >
> > > > >  /*
> > > > > @@ -246,7 +264,9 @@ struct virtio_net_ctrl_mac {
> > > > >
> > > > >  /*
> > > > >   * Control Receive Flow Steering
> > > > > - *
> > > > > + */
> > > > > +#define VIRTIO_NET_CTRL_MQ   4
> > > > > +/*
> > > > >   * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
> > > > >   * enables Receive Flow Steering, specifying the number of the transmit and
> > > > >   * receive queues that will be used. After the command is consumed and acked by
> > > > > @@ -259,11 +279,29 @@ struct virtio_net_ctrl_mq {
> > > > >       __virtio16 virtqueue_pairs;
> > > > >  };
> > > > >
> > > > > -#define VIRTIO_NET_CTRL_MQ   4
> > > > >   #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET        0
> > > > >   #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
> > > > >   #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
> > > > >
> > > > > +/*
> > > > > + * The command VIRTIO_NET_CTRL_MQ_RSS_CONFIG has the same effect as
> > > > > + * VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET does and additionally configures
> > > > > + * the receive steering to use a hash calculated for incoming packet
> > > > > + * to decide on receive virtqueue to place the packet. The command
> > > > > + * also provides parameters to calculate a hash and receive virtqueue.
> > > > > + */
> > > > > +struct virtio_net_rss_config {
> > > > > +     __le32 hash_types;
> > > > > +     __le16 indirection_table_mask;
> > > > > +     __le16 unclassified_queue;
> > > > > +     __le16 indirection_table[1/* + indirection_table_mask */];
> > > > > +     __le16 max_tx_vq;
> > > > > +     __u8 hash_key_length;
> > > > > +     __u8 hash_key_data[/* hash_key_length */];
> > > > > +};
> > > > > +
> > > > > + #define VIRTIO_NET_CTRL_MQ_RSS_CONFIG          1
> > > > > +
> > > >
> > > >
> > > > Extra space here.
> > >
> > > Where exactly you want to remove the empty line?
> > > The format here is exactly as in other places:
> > > comment - structure - space - command - space
> >
> > + #define VIRTIO_NET_CTRL_MQ_RSS_CONFIG          1
> >
> > should be
> >
> > +#define VIRTIO_NET_CTRL_MQ_RSS_CONFIG          1
> >
> > >
> > > >
> > > > >  /*
> > > > >   * Control network offloads
> > > > >   *
> > > > > --
> > > > > 2.17.1
> > > >
> >



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]