[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [virtio-dev] [PATCH v3 00/15] virtio-mem: paravirtualized memory
Hi David,
I got a kernel warning with v2 and v3.
// start a QEMU that is get from https://github.com/davidhildenbrand/qemu/tree/virtio-mem-v2 and setup a file as a ide disk.
/home/teawater/qemu/qemu/x86_64-softmmu/qemu-system-x86_64 -machine pc-i440fx-2.1,accel=kvm,usb=off -cpu host -no-reboot -nographic -device ide-hd,drive=hd -drive if=none,id=hd,file=/home/teawater/old.img,format=raw -kernel /home/teawater/kernel/bk2/arch/x86/boot/bzImage -append "console=ttyS0 root=/dev/sda nokaslr swiotlb=noforce" -m 1g,slots=10,maxmem=2G -smp 1 -s -monitor unix:/home/teawater/qemu/m,server,nowait
// Setup virtio-mem and plug 256m memory in qemu monitor:
object_add memory-backend-ram,id=mem1,size=256m
device_add virtio-mem-pci,id=vm0,memdev=mem1
qom-set vm0 requested-size 256M
// Go back to the terminal and access file system will got following kernel warning.
[ 19.515549] pci 0000:00:04.0: [1af4:1015] type 00 class 0x00ff00
[ 19.516227] pci 0000:00:04.0: reg 0x10: [io 0x0000-0x007f]
[ 19.517196] pci 0000:00:04.0: BAR 0: assigned [io 0x1000-0x107f]
[ 19.517843] virtio-pci 0000:00:04.0: enabling device (0000 -> 0001)
[ 19.535957] PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 19.536507] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[ 19.537528] virtio_mem virtio0: start address: 0x100000000
[ 19.538094] virtio_mem virtio0: region size: 0x10000000
[ 19.538621] virtio_mem virtio0: device block size: 0x200000
[ 19.539186] virtio_mem virtio0: memory block size: 0x8000000
[ 19.539752] virtio_mem virtio0: subblock size: 0x400000
[ 19.540357] virtio_mem virtio0: plugged size: 0x0
[ 19.540834] virtio_mem virtio0: requested size: 0x0
[ 20.170441] virtio_mem virtio0: plugged size: 0x0
[ 20.170933] virtio_mem virtio0: requested size: 0x10000000
[ 20.172247] Built 1 zonelists, mobility grouping on. Total pages: 266012
[ 20.172955] Policy zone: Normal
/ # ls
[ 26.724565] ------------[ cut here ]------------
[ 26.725047] ata_piix 0000:00:01.1: DMA addr 0x000000010fc14000+49152 overflow (mask ffffffff, bus limit 0).
[ 26.726024] WARNING: CPU: 0 PID: 179 at /home/teawater/kernel/linux2/kernel/dma/direct.c:364 dma_direct_map_page+0x118/0x130
[ 26.727141] Modules linked in:
[ 26.727456] CPU: 0 PID: 179 Comm: ls Not tainted 5.6.0-rc5-next-20200311+ #9
[ 26.728163] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 26.729305] RIP: 0010:dma_direct_map_page+0x118/0x130
[ 26.729825] Code: 8b 1f e8 3b 70 59 00 48 8d 4c 24 08 48 89 c6 4c 89 2c 24 4d 89 e1 49 89 e8 48 89 da 48 c7 c7 08 6c 34 82 31 c0 e8 d8 8e f7 ff <00
[ 26.731683] RSP: 0000:ffffc90000213838 EFLAGS: 00010082
[ 26.732205] RAX: 0000000000000000 RBX: ffff88803ebeb1b0 RCX: ffffffff82665148
[ 26.732913] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000046
[ 26.733621] RBP: 000000000000c000 R08: 00000000000001df R09: 00000000000001df
[ 26.734338] R10: 0000000000000000 R11: ffffc900002135a8 R12: 00000000ffffffff
[ 26.735054] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88803d55f5b0
[ 26.735772] FS: 00000000024e9880(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[ 26.736579] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 26.737162] CR2: 00000000005bfc7f CR3: 0000000107e12004 CR4: 0000000000360ef0
[ 26.737879] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 26.738591] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 26.739307] Call Trace:
[ 26.739564] dma_direct_map_sg+0x64/0xb0
[ 26.739969] ? ata_scsi_write_same_xlat+0x350/0x350
[ 26.740461] ata_qc_issue+0x214/0x260
[ 26.740839] ata_scsi_queuecmd+0x16a/0x490
[ 26.741255] scsi_queue_rq+0x679/0xa60
[ 26.741639] blk_mq_dispatch_rq_list+0x90/0x510
[ 26.742099] ? elv_rb_del+0x1f/0x30
[ 26.742456] ? deadline_remove_request+0x6a/0xb0
[ 26.742926] blk_mq_do_dispatch_sched+0x78/0x100
[ 26.743397] blk_mq_sched_dispatch_requests+0xf9/0x170
[ 26.743924] __blk_mq_run_hw_queue+0x7e/0x130
[ 26.744365] __blk_mq_delay_run_hw_queue+0x107/0x150
[ 26.744874] blk_mq_run_hw_queue+0x61/0x100
[ 26.745299] blk_mq_sched_insert_requests+0x71/0x110
[ 26.745798] blk_mq_flush_plug_list+0x14b/0x210
[ 26.746258] blk_flush_plug_list+0xbf/0xe0
[ 26.746675] blk_finish_plug+0x27/0x40
[ 26.747056] read_pages+0x7c/0x190
[ 26.747399] __do_page_cache_readahead+0x19c/0x1b0
[ 26.747886] filemap_fault+0x54e/0x9a0
[ 26.748268] ? alloc_set_pte+0x102/0x610
[ 26.748673] ? walk_component+0x64/0x2e0
[ 26.749072] ? filemap_map_pages+0xfa/0x3f0
[ 26.749498] ext4_filemap_fault+0x2c/0x3b
[ 26.749911] __do_fault+0x38/0xb0
[ 26.750251] __handle_mm_fault+0xd2a/0x16d0
[ 26.750678] handle_mm_fault+0xe2/0x1f0
[ 26.751069] do_page_fault+0x250/0x590
[ 26.751448] async_page_fault+0x34/0x40
[ 26.751841] RIP: 0033:0x5bfc7f
[ 26.752155] Code: Bad RIP value.
[ 26.752481] RSP: 002b:00007ffef0289cd8 EFLAGS: 00010246
[ 26.752999] RAX: 0000000000000001 RBX: 00007ffef028af81 RCX: 00007ffef028af84
[ 26.753715] RDX: 00007ffef0289e01 RSI: 00007ffef0289ea8 RDI: 0000000000000001
[ 26.754424] RBP: 00000000000000ac R08: 0000000000000001 R09: 0000000000000006
[ 26.755144] R10: 000000000089fc18 R11: 0000000000000246 R12: 00007ffef0289ea8
[ 26.755853] R13: 000000000043a5f0 R14: 0000000000000000 R15: 0000000000000000
[ 26.756560] ---[ end trace 23cc3e9021358587 ]---
[ 26.778034] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.778690] ata2.00: failed command: READ DMA
[ 26.779131] ata2.00: cmd c8/00:e8:92:ad:00/00:00:00:00:00/e0 tag 0 dma 118784 in
[ 26.779131] res 50/00:00:0a:80:03/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.780691] ata2.00: status: { DRDY }
[ 26.781603] ata2.00: configured for MWDMA2
[ 26.782034] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 26.782958] sd 1:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 26.783646] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command
[ 26.784321] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 ad 92 00 00 e8 00
[ 26.785056] blk_update_request: I/O error, dev sda, sector 44434 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 26.786118] ata2: EH complete
[ 26.810033] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.810690] ata2.00: failed command: READ DMA
[ 26.811133] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.811133] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.812681] ata2.00: status: { DRDY }
[ 26.813569] ata2.00: configured for MWDMA2
[ 26.813992] ata2: EH complete
[ 26.826031] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.826687] ata2.00: failed command: READ DMA
[ 26.827131] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.827131] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.828668] ata2.00: status: { DRDY }
[ 26.829552] ata2.00: configured for MWDMA2
[ 26.829972] ata2: EH complete
[ 26.842030] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.842686] ata2.00: failed command: READ DMA
[ 26.843127] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.843127] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.844656] ata2.00: status: { DRDY }
[ 26.845538] ata2.00: configured for MWDMA2
[ 26.845961] ata2: EH complete
[ 26.858030] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.858690] ata2.00: failed command: READ DMA
[ 26.859132] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.859132] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.860656] ata2.00: status: { DRDY }
[ 26.861542] ata2.00: configured for MWDMA2
[ 26.861960] ata2: EH complete
[ 26.874030] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.874693] ata2.00: failed command: READ DMA
[ 26.875131] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.875131] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.876675] ata2.00: status: { DRDY }
[ 26.877554] ata2.00: configured for MWDMA2
[ 26.877976] ata2: EH complete
[ 26.890030] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.890655] ata2.00: failed command: READ DMA
[ 26.891082] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.891082] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.892544] ata2.00: status: { DRDY }
[ 26.893408] ata2.00: configured for MWDMA2
[ 26.893812] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 26.894698] sd 1:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 26.895356] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command
[ 26.895993] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 ad fa 00 00 08 00
[ 26.896693] blk_update_request: I/O error, dev sda, sector 44538 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 26.897668] ata2: EH complete
[ 26.922032] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.922652] ata2.00: failed command: READ DMA
[ 26.923080] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.923080] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.924538] ata2.00: status: { DRDY }
[ 26.925404] ata2.00: configured for MWDMA2
[ 26.925807] ata2: EH complete
[ 26.938031] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.938650] ata2.00: failed command: READ DMA
[ 26.939076] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.939076] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.940529] ata2.00: status: { DRDY }
[ 26.941391] ata2.00: configured for MWDMA2
[ 26.941793] ata2: EH complete
[ 26.954031] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.954652] ata2.00: failed command: READ DMA
[ 26.955079] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.955079] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.956536] ata2.00: status: { DRDY }
[ 26.957400] ata2.00: configured for MWDMA2
[ 26.957800] ata2: EH complete
[ 26.970031] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.970653] ata2.00: failed command: READ DMA
[ 26.971079] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.971079] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.972536] ata2.00: status: { DRDY }
[ 26.973402] ata2.00: configured for MWDMA2
[ 26.973804] ata2: EH complete
[ 26.986030] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 26.986654] ata2.00: failed command: READ DMA
[ 26.987082] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 26.987082] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 26.988541] ata2.00: status: { DRDY }
[ 26.989406] ata2.00: configured for MWDMA2
[ 26.989807] ata2: EH complete
[ 27.002031] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 27.002653] ata2.00: failed command: READ DMA
[ 27.003083] ata2.00: cmd c8/00:08:fa:ad:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 27.003083] res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[ 27.004541] ata2.00: status: { DRDY }
[ 27.005404] ata2.00: configured for MWDMA2
[ 27.005806] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[ 27.006688] sd 1:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current]
[ 27.007346] sd 1:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command
[ 27.007982] sd 1:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 ad fa 00 00 08 00
[ 27.008680] blk_update_request: I/O error, dev sda, sector 44538 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 27.009649] ata2: EH complete
Bus error
I cannot reproduce this warning with set file as nvdimm with following command.
sudo /home/teawater/qemu/qemu/x86_64-softmmu/qemu-system-x86_64 -machine pc,accel=kvm,kernel_irqchip,nvdimm -no-reboot -nographic -kernel /home/teawater/kernel/bk2/arch/x86/boot/bzImage -append "console=ttyS0 root=/dev/pmem0 swiotlb=noforce" -m 1g,slots=1,maxmem=2G -smp 1 -device nvdimm,id=nv0,memdev=mem0 -object memory-backend-file,id=mem0,mem-path=/home/teawater/old.img,size=268435456 -monitor unix:/home/teawater/qemu/m,server,nowait
Best,
Hui
> 2020å5æ7æ 18:31ïDavid Hildenbrand <david@redhat.com> åéï
>
> This series is based on latest linux-next. The patches are located at:
> https://github.com/davidhildenbrand/linux.git virtio-mem-v3
>
> Patch #1 - #10 where contained in v2 and only contain minor modifications
> (mostly smaller fixes). The remaining patches are new and contain smaller
> optimizations.
>
> Details about virtio-mem can be found in the cover letter of v2 [1]. A
> basic QEMU implementation was posted yesterday [2].
>
> [1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com
> [2] https://lkml.kernel.org/r/20200506094948.76388-1-david@redhat.com
>
> v2 -> v3:
> - "virtio-mem: Paravirtualized memory hotplug"
> -- Include "linux/slab.h" to fix build issues
> -- Remember the "region_size", helpful for patch #11
> -- Minor simplifaction in virtio_mem_overlaps_range()
> -- Use notifier_from_errno() instead of notifier_to_errno() in notifier
> -- More reliable check for added memory when unloading the driver
> - "virtio-mem: Allow to specify an ACPI PXM as nid"
> -- Also print the nid
> - Added patch #11-#15
>
> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
> Cc: Samuel Ortiz <samuel.ortiz@intel.com>
> Cc: Robert Bradford <robert.bradford@intel.com>
> Cc: Luiz Capitulino <lcapitulino@redhat.com>
> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
> Cc: teawater <teawaterz@linux.alibaba.com>
> Cc: Igor Mammedov <imammedo@redhat.com>
> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
>
> David Hildenbrand (15):
> virtio-mem: Paravirtualized memory hotplug
> virtio-mem: Allow to specify an ACPI PXM as nid
> virtio-mem: Paravirtualized memory hotunplug part 1
> virtio-mem: Paravirtualized memory hotunplug part 2
> mm: Allow to offline unmovable PageOffline() pages via
> MEM_GOING_OFFLINE
> virtio-mem: Allow to offline partially unplugged memory blocks
> mm/memory_hotplug: Introduce offline_and_remove_memory()
> virtio-mem: Offline and remove completely unplugged memory blocks
> virtio-mem: Better retry handling
> MAINTAINERS: Add myself as virtio-mem maintainer
> virtio-mem: Add parent resource for all added "System RAM"
> virtio-mem: Drop manual check for already present memory
> virtio-mem: Unplug subblocks right-to-left
> virtio-mem: Use -ETXTBSY as error code if the device is busy
> virtio-mem: Try to unplug the complete online memory block first
>
> MAINTAINERS | 7 +
> drivers/acpi/numa/srat.c | 1 +
> drivers/virtio/Kconfig | 17 +
> drivers/virtio/Makefile | 1 +
> drivers/virtio/virtio_mem.c | 1962 +++++++++++++++++++++++++++++++
> include/linux/memory_hotplug.h | 1 +
> include/linux/page-flags.h | 10 +
> include/uapi/linux/virtio_ids.h | 1 +
> include/uapi/linux/virtio_mem.h | 208 ++++
> mm/memory_hotplug.c | 81 +-
> mm/page_alloc.c | 26 +
> mm/page_isolation.c | 9 +
> 12 files changed, 2314 insertions(+), 10 deletions(-)
> create mode 100644 drivers/virtio/virtio_mem.c
> create mode 100644 include/uapi/linux/virtio_mem.h
>
> --
> 2.25.3
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]