[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [virtio-dev] [PATCH v7 15/15] firmware: arm_scmi: Add virtio transport
On Tue, Aug 03, 2021 at 02:10:24PM +0100, Cristian Marussi wrote:
> From: Igor Skalkin <igor.skalkin@opensynergy.com>
>
> This transport enables communications with an SCMI platform through virtio;
> the SCMI platform will be represented by a virtio device.
>
> Implement an SCMI virtio driver according to the virtio SCMI device spec
> [1]. Virtio device id 32 has been reserved for the SCMI device [2].
>
> The virtio transport has one Tx channel (virtio cmdq, A2P channel) and
> at most one Rx channel (virtio eventq, P2A channel).
>
> The following feature bit defined in [1] is not implemented:
> VIRTIO_SCMI_F_SHARED_MEMORY.
>
> The number of messages which can be pending simultaneously is restricted
> according to the virtqueue capacity negotiated at probing time.
>
> As soon as Rx channel message buffers are allocated or have been read
> out by the arm-scmi driver, feed them back to the virtio device.
>
> Since some virtio devices may not have the short response time exhibited
> by SCMI platforms using other transports, set a generous response
> timeout.
>
> SCMI polling mode is not supported by this virtio transport since deemed
> meaningless: polling mode operation is offered by the SCMI core to those
> transports that could not provide a completion interrupt on the TX path,
> which is never the case for virtio whose core callbacks can easily call
> into core scmi_rx_callback upon messages reception.
>
> [1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
> [2] https://www.oasis-open.org/committees/ballot.php?id=3496
>
> Cc: "Michael S. Tsirkin" <mst@redhat.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
> [ Peter: Adapted patch for submission to upstream. ]
> Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
> Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
> [ Cristian: simplified driver logic, changed link_supplier and channel
> available/setup logic, removed dummy callbacks ]
> Co-developed-by: Cristian Marussi <cristian.marussi@arm.com>
> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> ---
> NOTE THAT VIRTIO TRANSPORT IS ADDED AS default=n
>
> V6 --> V7
> - renamed desc init/exit to transport_init/exit
> - reviewed Kconfig option to fit V7 ARM_SCMI Kconfig
>
> V5 --> V6
> - removed usage of delegated xfers
> - using new scmi_rx_callback with priv argument
> - removed .dummy clear_channel/.poll_done callbacks
> - added missing spinlock comments
> - updated Copyrights
>
> V4 --> V5
> - adapted Virtio transport config to new SCMI Kconfig layout
> - removed support for polling
> - added validate virtio method support
> - removed usage of raw_payload helpers
> - removed dynamic search of matching devices
> - added one single statically configured device
>
> V3 --> V4
> - using delegated xfers
> - using raw_payload msg helpers
> ---
> MAINTAINERS | 1 +
> drivers/firmware/arm_scmi/Kconfig | 11 +
> drivers/firmware/arm_scmi/Makefile | 1 +
> drivers/firmware/arm_scmi/common.h | 3 +
> drivers/firmware/arm_scmi/driver.c | 3 +
> drivers/firmware/arm_scmi/virtio.c | 491 +++++++++++++++++++++++++++++
> include/uapi/linux/virtio_ids.h | 1 +
> include/uapi/linux/virtio_scmi.h | 24 ++
> 8 files changed, 535 insertions(+)
> create mode 100644 drivers/firmware/arm_scmi/virtio.c
> create mode 100644 include/uapi/linux/virtio_scmi.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a61f4f3b78a9..db1c7b74642e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17940,6 +17940,7 @@ F: drivers/regulator/scmi-regulator.c
> F: drivers/reset/reset-scmi.c
> F: include/linux/sc[mp]i_protocol.h
> F: include/trace/events/scmi.h
> +F: include/uapi/linux/virtio_scmi.h
For all virtio bits please include
L: virtualization@lists.linux-foundation.org
as well.
Thanks!
>
> SYSTEM RESET/SHUTDOWN DRIVERS
> M: Sebastian Reichel <sre@kernel.org>
> diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
> index 24fed705b02c..7f4d2435503b 100644
> --- a/drivers/firmware/arm_scmi/Kconfig
> +++ b/drivers/firmware/arm_scmi/Kconfig
> @@ -66,6 +66,17 @@ config ARM_SCMI_TRANSPORT_SMC
> If you want the ARM SCMI PROTOCOL stack to include support for a
> transport based on SMC, answer Y.
>
> +config ARM_SCMI_TRANSPORT_VIRTIO
> + bool "SCMI transport based on VirtIO"
> + depends on VIRTIO
> + select ARM_SCMI_HAVE_TRANSPORT
> + select ARM_SCMI_HAVE_MSG
> + help
> + This enables the virtio based transport for SCMI.
> +
> + If you want the ARM SCMI PROTOCOL stack to include support for a
> + transport based on VirtIO, answer Y.
> +
> endif #ARM_SCMI_PROTOCOL
>
> config ARM_SCMI_POWER_DOMAIN
> diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
> index aaad9f6589aa..1dcf123d64ab 100644
> --- a/drivers/firmware/arm_scmi/Makefile
> +++ b/drivers/firmware/arm_scmi/Makefile
> @@ -5,6 +5,7 @@ scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
> scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += mailbox.o
> scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += smc.o
> scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
> +scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
> scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
> scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
> $(scmi-transport-y)
> diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> index 7864c21269b0..dea1bfbe1052 100644
> --- a/drivers/firmware/arm_scmi/common.h
> +++ b/drivers/firmware/arm_scmi/common.h
> @@ -418,6 +418,9 @@ extern const struct scmi_desc scmi_mailbox_desc;
> #ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
> extern const struct scmi_desc scmi_smc_desc;
> #endif
> +#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
> +extern const struct scmi_desc scmi_virtio_desc;
> +#endif
>
> void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
> void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index aaca01a4d752..00fcacd06562 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -1983,6 +1983,9 @@ static const struct of_device_id scmi_of_match[] = {
> #endif
> #ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
> { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
> +#endif
> +#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
> + { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
> #endif
> { /* Sentinel */ },
> };
> diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c
> new file mode 100644
> index 000000000000..3dacf794b177
> --- /dev/null
> +++ b/drivers/firmware/arm_scmi/virtio.c
> @@ -0,0 +1,491 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Virtio Transport driver for Arm System Control and Management Interface
> + * (SCMI).
> + *
> + * Copyright (C) 2020-2021 OpenSynergy.
> + * Copyright (C) 2021 ARM Ltd.
> + */
> +
> +/**
> + * DOC: Theory of Operation
> + *
> + * The scmi-virtio transport implements a driver for the virtio SCMI device.
> + *
> + * There is one Tx channel (virtio cmdq, A2P channel) and at most one Rx
> + * channel (virtio eventq, P2A channel). Each channel is implemented through a
> + * virtqueue. Access to each virtqueue is protected by spinlocks.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/slab.h>
> +#include <linux/virtio.h>
> +#include <linux/virtio_config.h>
> +
> +#include <uapi/linux/virtio_ids.h>
> +#include <uapi/linux/virtio_scmi.h>
> +
> +#include "common.h"
> +
> +#define VIRTIO_SCMI_MAX_MSG_SIZE 128 /* Value may be increased. */
> +#define VIRTIO_SCMI_MAX_PDU_SIZE \
> + (VIRTIO_SCMI_MAX_MSG_SIZE + SCMI_MSG_MAX_PROT_OVERHEAD)
> +#define DESCRIPTORS_PER_TX_MSG 2
> +
> +/**
> + * struct scmi_vio_channel - Transport channel information
> + *
> + * @vqueue: Associated virtqueue
> + * @cinfo: SCMI Tx or Rx channel
> + * @free_list: List of unused scmi_vio_msg, maintained for Tx channels only
> + * @is_rx: Whether channel is an Rx channel
> + * @ready: Whether transport user is ready to hear about channel
> + * @max_msg: Maximum number of pending messages for this channel.
> + * @lock: Protects access to all members except ready.
> + * @ready_lock: Protects access to ready. If required, it must be taken before
> + * lock.
> + */
> +struct scmi_vio_channel {
> + struct virtqueue *vqueue;
> + struct scmi_chan_info *cinfo;
> + struct list_head free_list;
> + bool is_rx;
> + bool ready;
> + unsigned int max_msg;
> + /* lock to protect access to all members except ready. */
> + spinlock_t lock;
> + /* lock to rotects access to ready flag. */
> + spinlock_t ready_lock;
> +};
> +
> +/**
> + * struct scmi_vio_msg - Transport PDU information
> + *
> + * @request: SDU used for commands
> + * @input: SDU used for (delayed) responses and notifications
> + * @list: List which scmi_vio_msg may be part of
> + * @rx_len: Input SDU size in bytes, once input has been received
> + */
> +struct scmi_vio_msg {
> + struct scmi_msg_payld *request;
> + struct scmi_msg_payld *input;
> + struct list_head list;
> + unsigned int rx_len;
> +};
> +
> +/* Only one SCMI VirtIO device can possibly exist */
> +static struct virtio_device *scmi_vdev;
> +
> +static bool scmi_vio_have_vq_rx(struct virtio_device *vdev)
> +{
> + return virtio_has_feature(vdev, VIRTIO_SCMI_F_P2A_CHANNELS);
> +}
> +
> +static int scmi_vio_feed_vq_rx(struct scmi_vio_channel *vioch,
> + struct scmi_vio_msg *msg)
> +{
> + struct scatterlist sg_in;
> + int rc;
> + unsigned long flags;
> +
> + sg_init_one(&sg_in, msg->input, VIRTIO_SCMI_MAX_PDU_SIZE);
> +
> + spin_lock_irqsave(&vioch->lock, flags);
> +
> + rc = virtqueue_add_inbuf(vioch->vqueue, &sg_in, 1, msg, GFP_ATOMIC);
> + if (rc)
> + dev_err_once(vioch->cinfo->dev,
> + "failed to add to virtqueue (%d)\n", rc);
> + else
> + virtqueue_kick(vioch->vqueue);
> +
> + spin_unlock_irqrestore(&vioch->lock, flags);
> +
> + return rc;
> +}
> +
> +static void scmi_finalize_message(struct scmi_vio_channel *vioch,
> + struct scmi_vio_msg *msg)
> +{
> + if (vioch->is_rx) {
> + scmi_vio_feed_vq_rx(vioch, msg);
> + } else {
> + unsigned long flags;
> +
> + spin_lock_irqsave(&vioch->lock, flags);
> + list_add(&msg->list, &vioch->free_list);
> + spin_unlock_irqrestore(&vioch->lock, flags);
> + }
> +}
> +
> +static void scmi_vio_complete_cb(struct virtqueue *vqueue)
> +{
> + unsigned long ready_flags;
> + unsigned long flags;
> + unsigned int length;
> + struct scmi_vio_channel *vioch;
> + struct scmi_vio_msg *msg;
> + bool cb_enabled = true;
> +
> + if (WARN_ON_ONCE(!vqueue->vdev->priv))
> + return;
> + vioch = &((struct scmi_vio_channel *)vqueue->vdev->priv)[vqueue->index];
> +
> + for (;;) {
> + spin_lock_irqsave(&vioch->ready_lock, ready_flags);
maybe take the lock out of the loop for speed?
> +
> + if (!vioch->ready) {
> + if (!cb_enabled)
> + (void)virtqueue_enable_cb(vqueue);
> + goto unlock_ready_out;
> + }
> +
> + spin_lock_irqsave(&vioch->lock, flags);
no reason to re-save interrupts here - saved already ...
> + if (cb_enabled) {
> + virtqueue_disable_cb(vqueue);
> + cb_enabled = false;
> + }
> + msg = virtqueue_get_buf(vqueue, &length);
> + if (!msg) {
> + if (virtqueue_enable_cb(vqueue))
> + goto unlock_out;
> + cb_enabled = true;
> + }
> + spin_unlock_irqrestore(&vioch->lock, flags);
> +
> + if (msg) {
> + msg->rx_len = length;
> + scmi_rx_callback(vioch->cinfo,
> + msg_read_header(msg->input), msg);
> +
> + scmi_finalize_message(vioch, msg);
> + }
> +
> + spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
> + }
> +
> +unlock_out:
> + spin_unlock_irqrestore(&vioch->lock, flags);
> +unlock_ready_out:
> + spin_unlock_irqrestore(&vioch->ready_lock, ready_flags);
> +}
> +
> +static const char *const scmi_vio_vqueue_names[] = { "tx", "rx" };
> +
> +static vq_callback_t *scmi_vio_complete_callbacks[] = {
> + scmi_vio_complete_cb,
> + scmi_vio_complete_cb
> +};
> +
> +static unsigned int virtio_get_max_msg(struct scmi_chan_info *base_cinfo)
> +{
> + struct scmi_vio_channel *vioch = base_cinfo->transport_info;
> +
> + return vioch->max_msg;
> +}
> +
> +static int virtio_link_supplier(struct device *dev)
> +{
> + if (!scmi_vdev) {
> + dev_notice_once(dev,
> + "Deferring probe after not finding a bound scmi-virtio device\n");
> + return -EPROBE_DEFER;
> + }
> +
> + if (!device_link_add(dev, &scmi_vdev->dev,
> + DL_FLAG_AUTOREMOVE_CONSUMER)) {
> + dev_err(dev, "Adding link to supplier virtio device failed\n");
> + return -ECANCELED;
> + }
> +
> + return 0;
> +}
> +
> +static bool virtio_chan_available(struct device *dev, int idx)
> +{
> + struct scmi_vio_channel *channels, *vioch = NULL;
> +
> + if (WARN_ON_ONCE(!scmi_vdev))
> + return false;
> +
> + channels = (struct scmi_vio_channel *)scmi_vdev->priv;
> +
> + switch (idx) {
> + case VIRTIO_SCMI_VQ_TX:
> + vioch = &channels[VIRTIO_SCMI_VQ_TX];
> + break;
> + case VIRTIO_SCMI_VQ_RX:
> + if (scmi_vio_have_vq_rx(scmi_vdev))
> + vioch = &channels[VIRTIO_SCMI_VQ_RX];
> + break;
> + default:
> + return false;
> + }
> +
> + return vioch && !vioch->cinfo ? true : false;
> +}
> +
> +static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
> + bool tx)
> +{
> + unsigned long flags;
> + struct scmi_vio_channel *vioch;
> + int index = tx ? VIRTIO_SCMI_VQ_TX : VIRTIO_SCMI_VQ_RX;
> + int i;
> +
> + if (!scmi_vdev)
> + return -EPROBE_DEFER;
> +
> + vioch = &((struct scmi_vio_channel *)scmi_vdev->priv)[index];
> +
> + for (i = 0; i < vioch->max_msg; i++) {
> + struct scmi_vio_msg *msg;
> +
> + msg = devm_kzalloc(cinfo->dev, sizeof(*msg), GFP_KERNEL);
> + if (!msg)
> + return -ENOMEM;
> +
> + if (tx) {
> + msg->request = devm_kzalloc(cinfo->dev,
> + VIRTIO_SCMI_MAX_PDU_SIZE,
> + GFP_KERNEL);
> + if (!msg->request)
> + return -ENOMEM;
> + }
> +
> + msg->input = devm_kzalloc(cinfo->dev, VIRTIO_SCMI_MAX_PDU_SIZE,
> + GFP_KERNEL);
> + if (!msg->input)
> + return -ENOMEM;
> +
> + if (tx) {
> + spin_lock_irqsave(&vioch->lock, flags);
> + list_add_tail(&msg->list, &vioch->free_list);
> + spin_unlock_irqrestore(&vioch->lock, flags);
> + } else {
> + scmi_vio_feed_vq_rx(vioch, msg);
> + }
> + }
> +
> + spin_lock_irqsave(&vioch->lock, flags);
> + cinfo->transport_info = vioch;
> + /* Indirectly setting channel not available any more */
> + vioch->cinfo = cinfo;
> + spin_unlock_irqrestore(&vioch->lock, flags);
> +
> + spin_lock_irqsave(&vioch->ready_lock, flags);
> + vioch->ready = true;
> + spin_unlock_irqrestore(&vioch->ready_lock, flags);
> +
> + return 0;
> +}
> +
> +static int virtio_chan_free(int id, void *p, void *data)
> +{
> + unsigned long flags;
> + struct scmi_chan_info *cinfo = p;
> + struct scmi_vio_channel *vioch = cinfo->transport_info;
> +
> + spin_lock_irqsave(&vioch->ready_lock, flags);
> + vioch->ready = false;
> + spin_unlock_irqrestore(&vioch->ready_lock, flags);
> +
> + scmi_free_channel(cinfo, data, id);
> +
> + spin_lock_irqsave(&vioch->lock, flags);
> + vioch->cinfo = NULL;
> + spin_unlock_irqrestore(&vioch->lock, flags);
> +
> + return 0;
> +}
> +
> +static int virtio_send_message(struct scmi_chan_info *cinfo,
> + struct scmi_xfer *xfer)
> +{
> + struct scmi_vio_channel *vioch = cinfo->transport_info;
> + struct scatterlist sg_out;
> + struct scatterlist sg_in;
> + struct scatterlist *sgs[DESCRIPTORS_PER_TX_MSG] = { &sg_out, &sg_in };
> + unsigned long flags;
> + int rc;
> + struct scmi_vio_msg *msg;
> +
> + spin_lock_irqsave(&vioch->lock, flags);
> +
> + if (list_empty(&vioch->free_list)) {
> + spin_unlock_irqrestore(&vioch->lock, flags);
> + return -EBUSY;
> + }
> +
> + msg = list_first_entry(&vioch->free_list, typeof(*msg), list);
> + list_del(&msg->list);
> +
> + msg_tx_prepare(msg->request, xfer);
> +
> + sg_init_one(&sg_out, msg->request, msg_command_size(xfer));
> + sg_init_one(&sg_in, msg->input, msg_response_size(xfer));
> +
> + rc = virtqueue_add_sgs(vioch->vqueue, sgs, 1, 1, msg, GFP_ATOMIC);
> + if (rc) {
> + list_add(&msg->list, &vioch->free_list);
> + dev_err_once(vioch->cinfo->dev,
why are all of these warnings once? There'll never be too many of these
and it can make debugging harder.
> + "%s() failed to add to virtqueue (%d)\n", __func__,
> + rc);
> + } else {
> + virtqueue_kick(vioch->vqueue);
> + }
> +
> + spin_unlock_irqrestore(&vioch->lock, flags);
> +
> + return rc;
> +}
> +
> +static void virtio_fetch_response(struct scmi_chan_info *cinfo,
> + struct scmi_xfer *xfer)
> +{
> + struct scmi_vio_msg *msg = xfer->priv;
> +
> + if (msg) {
> + msg_fetch_response(msg->input, msg->rx_len, xfer);
> + xfer->priv = NULL;
> + }
> +}
> +
> +static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
> + size_t max_len, struct scmi_xfer *xfer)
> +{
> + struct scmi_vio_msg *msg = xfer->priv;
> +
> + if (msg) {
> + msg_fetch_notification(msg->input, msg->rx_len, max_len, xfer);
> + xfer->priv = NULL;
> + }
> +}
> +
> +static const struct scmi_transport_ops scmi_virtio_ops = {
> + .link_supplier = virtio_link_supplier,
> + .chan_available = virtio_chan_available,
> + .chan_setup = virtio_chan_setup,
> + .chan_free = virtio_chan_free,
> + .get_max_msg = virtio_get_max_msg,
> + .send_message = virtio_send_message,
> + .fetch_response = virtio_fetch_response,
> + .fetch_notification = virtio_fetch_notification,
> +};
> +
> +static int scmi_vio_probe(struct virtio_device *vdev)
> +{
> + struct device *dev = &vdev->dev;
> + struct scmi_vio_channel *channels;
> + bool have_vq_rx;
> + int vq_cnt;
> + int i;
> + int ret;
> + struct virtqueue *vqs[VIRTIO_SCMI_VQ_MAX_CNT];
> +
> + /* Only one SCMI VirtiO device allowed */
> + if (scmi_vdev)
> + return -EINVAL;
Or EBUSY maybe? And print an error message pls so users
can figure out what is going on.
> +
> + have_vq_rx = scmi_vio_have_vq_rx(vdev);
> + vq_cnt = have_vq_rx ? VIRTIO_SCMI_VQ_MAX_CNT : 1;
> +
> + channels = devm_kcalloc(dev, vq_cnt, sizeof(*channels), GFP_KERNEL);
> + if (!channels)
> + return -ENOMEM;
> +
> + if (have_vq_rx)
> + channels[VIRTIO_SCMI_VQ_RX].is_rx = true;
> +
> + ret = virtio_find_vqs(vdev, vq_cnt, vqs, scmi_vio_complete_callbacks,
> + scmi_vio_vqueue_names, NULL);
> + if (ret) {
> + dev_err(dev, "Failed to get %d virtqueue(s)\n", vq_cnt);
And free allocated memory here?
> + return ret;
> + }
> +
> + for (i = 0; i < vq_cnt; i++) {
> + unsigned int sz;
> +
> + spin_lock_init(&channels[i].lock);
> + spin_lock_init(&channels[i].ready_lock);
> + INIT_LIST_HEAD(&channels[i].free_list);
> + channels[i].vqueue = vqs[i];
> +
> + sz = virtqueue_get_vring_size(channels[i].vqueue);
> + /* Tx messages need multiple descriptors. */
> + if (!channels[i].is_rx)
> + sz /= DESCRIPTORS_PER_TX_MSG;
> +
> + if (sz > MSG_TOKEN_MAX) {
> + dev_info_once(dev,
> + "%s virtqueue could hold %d messages. Only %ld allowed to be pending.\n",
> + channels[i].is_rx ? "rx" : "tx",
> + sz, MSG_TOKEN_MAX);
> + sz = MSG_TOKEN_MAX;
> + }
> + channels[i].max_msg = sz;
What happens if sz is too small here? E.g. 0? Should we fail probe?
> + }
> +
> + vdev->priv = channels;
> + scmi_vdev = vdev;
So this is read in parallel, unless there's a lock I think you need an
smp_wmb here and WRITE_ONCE. Or maybe add locking instead so we
do not worry about ordering ...
> +
> + return 0;
> +}
> +
> +static void scmi_vio_remove(struct virtio_device *vdev)
> +{
> + vdev->config->reset(vdev);
This will stop processing buffers immediately.
You generally need to do something about outstanding
buffers though.
> + vdev->config->del_vqs(vdev);
> + scmi_vdev = NULL;
Well doing this here does not prevent some users being outstanding.
I.e. I see device_link_add above but we should do
device_link_del somewhere ...
> +}
> +
> +static int scmi_vio_validate(struct virtio_device *vdev)
> +{
> + if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) {
> + dev_err(&vdev->dev,
> + "device does not comply with spec version 1.x\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static unsigned int features[] = {
> + VIRTIO_SCMI_F_P2A_CHANNELS,
> +};
> +
> +static const struct virtio_device_id id_table[] = {
> + { VIRTIO_ID_SCMI, VIRTIO_DEV_ANY_ID },
> + { 0 }
> +};
> +
> +static struct virtio_driver virtio_scmi_driver = {
> + .driver.name = "scmi-virtio",
> + .driver.owner = THIS_MODULE,
> + .feature_table = features,
> + .feature_table_size = ARRAY_SIZE(features),
> + .id_table = id_table,
> + .probe = scmi_vio_probe,
> + .remove = scmi_vio_remove,
> + .validate = scmi_vio_validate,
> +};
> +
> +static int __init virtio_scmi_init(void)
> +{
> + return register_virtio_driver(&virtio_scmi_driver);
> +}
> +
> +static void __exit virtio_scmi_exit(void)
> +{
> + unregister_virtio_driver(&virtio_scmi_driver);
> +}
> +
> +const struct scmi_desc scmi_virtio_desc = {
> + .transport_init = virtio_scmi_init,
> + .transport_exit = virtio_scmi_exit,
> + .ops = &scmi_virtio_ops,
> + .max_rx_timeout_ms = 60000, /* for non-realtime virtio devices */
> + .max_msg = 0, /* overridden by virtio_get_max_msg() */
> + .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE,
> +};
> diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
> index 70a8057ad4bb..f74155f6882d 100644
> --- a/include/uapi/linux/virtio_ids.h
> +++ b/include/uapi/linux/virtio_ids.h
> @@ -55,6 +55,7 @@
> #define VIRTIO_ID_FS 26 /* virtio filesystem */
> #define VIRTIO_ID_PMEM 27 /* virtio pmem */
> #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */
> +#define VIRTIO_ID_SCMI 32 /* virtio SCMI */
> #define VIRTIO_ID_BT 40 /* virtio bluetooth */
>
> /*
> diff --git a/include/uapi/linux/virtio_scmi.h b/include/uapi/linux/virtio_scmi.h
> new file mode 100644
> index 000000000000..f8ddd04a3ace
> --- /dev/null
> +++ b/include/uapi/linux/virtio_scmi.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
> +/*
> + * Copyright (C) 2020-2021 OpenSynergy GmbH
> + * Copyright (C) 2021 ARM Ltd.
> + */
> +
> +#ifndef _UAPI_LINUX_VIRTIO_SCMI_H
> +#define _UAPI_LINUX_VIRTIO_SCMI_H
> +
> +#include <linux/virtio_types.h>
> +
> +/* Device implements some SCMI notifications, or delayed responses. */
> +#define VIRTIO_SCMI_F_P2A_CHANNELS 0
> +
> +/* Device implements any SCMI statistics shared memory region */
> +#define VIRTIO_SCMI_F_SHARED_MEMORY 1
> +
> +/* Virtqueues */
> +
> +#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */
> +#define VIRTIO_SCMI_VQ_RX 1 /* eventq */
> +#define VIRTIO_SCMI_VQ_MAX_CNT 2
> +
> +#endif /* _UAPI_LINUX_VIRTIO_SCMI_H */
> --
> 2.17.1
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]