[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [virtio-dev] [PATCH v8] virtio-net: support device stats
On Tue, 18 Jan 2022 02:16:35 -0500, Michael S. Tsirkin <mst@redhat.com> wrote:
> On Tue, Jan 18, 2022 at 11:34:25AM +0800, Xuan Zhuo wrote:
> > On Tue, 18 Jan 2022 11:26:21 +0800, Jason Wang <jasowang@redhat.com> wrote:
> > > On Mon, Jan 17, 2022 at 3:22 PM Xuan Zhuo <xuanzhuo@linux.alibaba.com> wrote:
> > > >
> > > > On Mon, 17 Jan 2022 15:06:52 +0800, Jason Wang <jasowang@redhat.com> wrote:
> > > > >
> > > > > å 2022/1/17 äå10:14, Xuan Zhuo åé:
> > > > > > On Sat, 15 Jan 2022 13:17:26 -0500, Michael S. Tsirkin <mst@redhat.com> wrote:
> > > > > >> On Tue, Jan 11, 2022 at 12:01:25PM +0800, Xuan Zhuo wrote:
> > > > > >>> This patch allows the driver to obtain some statistics from the device.
> > > > > >>>
> > > > > >>> In the back-end implementation, we can count a lot of such information,
> > > > > >>> which can be used for debugging and judging the running status of the
> > > > > >>> back-end. We hope to directly display it to the user through ethtool.
> > > > > >>>
> > > > > >>> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> > > > > >>> Reviewed-by: Jason Wang <jasowang@redhat.com>
> > > > > >>> ---
> > > > > >>>
> > > > > >>> v8:
> > > > > >>> 1. Modified based on comments by Cornelia Huck
> > > > > >>>
> > > > > >>> v7:
> > > > > >>> 1. add rx_reset, tx_reset
> > > > > >>> 2. add device normative and dirver normative
> > > > > >>> 3. add comments for *_packets, *_bytres
> > > > > >>>
> > > > > >>> v6:
> > > > > >>> 1. correct the names and descriptions of some stats items
> > > > > >>>
> > > > > >>> v5:
> > > > > >>> 1. add VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ
> > > > > >>> 2. more item for virtio_net_ctrl_reply_stats_queue_pair
> > > > > >>>
> > > > > >>> v4:
> > > > > >>> 1. remove dev_stats_num, {rx|tx}_stats_num
> > > > > >>> 2. Use two commands to get the stats of queue pair and dev respectively
> > > > > >>>
> > > > > >>> v3 changes:
> > > > > >>> 1. add dev_version
> > > > > >>> 2. use queue_pair_index replace rx_num, tx_num
> > > > > >>> 3. Explain the processing when the device and driver support different numbers
> > > > > >>> of stats
> > > > > >>>
> > > > > >>> conformance.tex | 2 +
> > > > > >>> content.tex | 133 +++++++++++++++++++++++++++++++++++++++++++++++-
> > > > > >>> 2 files changed, 134 insertions(+), 1 deletion(-)
> > > > > >>>
> > > > > >>> diff --git a/conformance.tex b/conformance.tex
> > > > > >>> index 42f8537..950924e 100644
> > > > > >>> --- a/conformance.tex
> > > > > >>> +++ b/conformance.tex
> > > > > >>> @@ -142,6 +142,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
> > > > > >>> \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
> > > > > >>> \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Offloads State Configuration / Setting Offloads State}
> > > > > >>> \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) }
> > > > > >>> +\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Device stats}
> > > > > >>> \end{itemize}
> > > > > >>>
> > > > > >>> \conformance{\subsection}{Block Driver Conformance}\label{sec:Conformance / Driver Conformance / Block Driver Conformance}
> > > > > >>> @@ -401,6 +402,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
> > > > > >>> \item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Gratuitous Packet Sending}
> > > > > >>> \item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Automatic receive steering in multiqueue mode}
> > > > > >>> \item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) / RSS processing}
> > > > > >>> +\item \ref{devicenormative:Device Types / Network Device / Device Operation / Control Virtqueue / Device stats}
> > > > > >>> \end{itemize}
> > > > > >>>
> > > > > >>> \conformance{\subsection}{Block Device Conformance}\label{sec:Conformance / Device Conformance / Block Device Conformance}
> > > > > >>> diff --git a/content.tex b/content.tex
> > > > > >>> index cf20570..fa385e2 100644
> > > > > >>> --- a/content.tex
> > > > > >>> +++ b/content.tex
> > > > > >>> @@ -3092,6 +3092,9 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits
> > > > > >>> \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
> > > > > >>> channel.
> > > > > >>>
> > > > > >>> +\item[VIRTIO_NET_F_CTRL_STATS(55)] Device can provide device-level statistics
> > > > > >>> + to the driver through the control channel.
> > > > > >>> +
> > > > > >>> \item[VIRTIO_NET_F_HOST_USO (56)] Device can receive USO packets. Unlike UFO
> > > > > >>> (fragmenting the packet) the USO splits large UDP packet
> > > > > >>> to several segments when each of these smaller packets has UDP header.
> > > > > >>> @@ -3137,6 +3140,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device
> > > > > >>> \item[VIRTIO_NET_F_GUEST_ANNOUNCE] Requires VIRTIO_NET_F_CTRL_VQ.
> > > > > >>> \item[VIRTIO_NET_F_MQ] Requires VIRTIO_NET_F_CTRL_VQ.
> > > > > >>> \item[VIRTIO_NET_F_CTRL_MAC_ADDR] Requires VIRTIO_NET_F_CTRL_VQ.
> > > > > >>> +\item[VIRTIO_NET_F_CTRL_STATS] Requires VIRTIO_NET_F_CTRL_VQ.
> > > > > >>> \item[VIRTIO_NET_F_RSC_EXT] Requires VIRTIO_NET_F_HOST_TSO4 or VIRTIO_NET_F_HOST_TSO6.
> > > > > >>> \item[VIRTIO_NET_F_RSS] Requires VIRTIO_NET_F_CTRL_VQ.
> > > > > >>> \end{description}
> > > > > >>> @@ -4015,6 +4019,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
> > > > > >>> u8 command;
> > > > > >>> u8 command-specific-data[];
> > > > > >>> u8 ack;
> > > > > >>> + u8 command-specific-data-reply[];
> > > > > >>> };
> > > > > >>>
> > > > > >>> /* ack values */
> > > > > >> we now need to document which commands include the reply,
> > > > > >> otherwise reader will be confused.
> > > > > > OK.
> > > > > >
> > > > > >>> @@ -4023,7 +4028,8 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
> > > > > >>> \end{lstlisting}
> > > > > >>>
> > > > > >>> The \field{class}, \field{command} and command-specific-data are set by the
> > > > > >>> -driver, and the device sets the \field{ack} byte. There is little it can
> > > > > >>> +driver, and the device sets the \field{ack} byte and optionally
> > > > > >>> +\field{command-specific-data-reply}. There is little it can
> > > > > >>> do
> > > > > >> Now "it" refers to device where it used to refer to the driver.
> > > > > > There is little it can except issue a diagnostic if \field{ack} is not VIRTIO_NET_OK.
> > > > > >
> > > > > > I don't feel like this has changed or affected anything.
> > > > > > Can you help me change it?
> > > > > >
> > > > > >
> > > > > >>> except issue a diagnostic if \field{ack} is not
> > > > > >>> VIRTIO_NET_OK.
> > > > > >>>
> > > > > >>> @@ -4471,6 +4477,131 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
> > > > > >>> according to the native endian of the guest rather than
> > > > > >>> (necessarily when not using the legacy interface) little-endian.
> > > > > >>>
> > > > > >>> +\paragraph{Device stats}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Device stats}
> > > > > >>> +
> > > > > >>> +If the VIRTIO_NET_F_CTRL_STATS feature is negotiated, the driver can
> > > > > >>> +get device stats from the device in \field{command-specific-data-reply}.
> > > > > >>> +
> > > > > >>> +To get the stats, the following definitions are used:
> > > > > >>> +\begin{lstlisting}
> > > > > >>> +#define VIRTIO_NET_CTRL_STATS 6
> > > > > >>> +#define VIRTIO_NET_CTRL_STATS_GET_DEV 0
> > > > > >>> +#define VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ 1
> > > > > >>> +#define VIRTIO_NET_CTRL_STATS_GET_QUEUE_PAIR 2
> > > > > >>> +\end{lstlisting}
> > > > > >>> +
> > > > > >>> +The following layout structures are used:
> > > > > >>> +
> > > > > >>> +\field{command-specific-data}
> > > > > >>> +\begin{lstlisting}
> > > > > >>> +struct virtio_net_ctrl_stats_queue_pair {
> > > > > >>> + le64 queue_pair_index;
> > > > > >>> +}
> > > > > >>> +\end{lstlisting}
> > > > > >>> +
> > > > > >>> +\field{command-specific-data-reply}
> > > > > >>> +\begin{lstlisting}
> > > > > >>> +struct virtio_net_ctrl_reply_stats_dev {
> > > > > >>> + le64 dev_reset; // The number of device resets.
> > > > > >> while we already have some places using // comments, they
> > > > > >> are not used consistently. Better to use /* text */ for now.
> > > > > > OK.
> > > > > >
> > > > > >>> +}
> > > > > >>
> > > > > >>
> > > > > >> I am still worrying about this one. I think it's a bit vague.
> > > > > >> Some types of reset will zero this counter, others will not.
> > > > > >> Also, this looks more like a generic capability than anything
> > > > > >> specific to net. And this raises questions about .
> > > > > >
> > > > > > I think, I should define that the device will not set this variable to 0 during
> > > > > > reset.
> > > > > >
> > > > > > The purpose of adding this is to count the number of times the user deletes/adds
> > > > > > the network card. The virtio-net device may be deleted/added by the user
> > > > > > multiple times, and this is reflected in the device layer as the number of
> > > > > > resets.
> > > > > >
> > > > > >>
> > > > > >>
> > > > > >>> +
> > > > > >>> +struct virtio_net_ctrl_reply_stats_cvq {
> > > > > >>> + le64 request_num; // The number of requests.
> > > > > >> We call them commands elsewhere. It is however unclear whether
> > > > > >> the request for the stats itself is included in the counter.
> > > > > >> Also, do these counters reset on device reset? I would
> > > > > >> assume so but given dev_reset does not reset it's hard to be
> > > > > >> sure.
> > > > > >
> > > > > > I will change request -> command.
> > > > > >
> > > > > > We should really define that the device should not reset these statistics during
> > > > > > reset
> > > > > >
> > > > > >
> > > > > >>> + le64 ok_num; // The number of ok acks.
> > > > > >>> + le64 err_num; // The number of err acks.
> > > > > >> A bit more precise pls: e.g. "the number of commands where ack was
> > > > > >> VIRTIO_NET_OK"?
> > > > > >
> > > > > > OK
> > > > > >
> > > > > >>
> > > > > >>> +
> > > > > >>> + le64 req_rx_promisc; // The number of requests with command VIRTIO_NET_CTRL_RX_PROMISC.
> > > > > >>> + le64 req_rx_allmulti; // The number of requests with command VIRTIO_NET_CTRL_RX_ALLMULTI.
> > > > > >>> + le64 req_rx_alluni; // The number of requests with command VIRTIO_NET_CTRL_RX_ALLUNI.
> > > > > >>> + le64 req_rx_nomulti; // The number of requests with command VIRTIO_NET_CTRL_RX_NOMULTI.
> > > > > >>> + le64 req_rx_nouni; // The number of requests with command VIRTIO_NET_CTRL_RX_NOUNI.
> > > > > >>> + le64 req_rx_nobcast; // The number of requests with command VIRTIO_NET_CTRL_RX_NOBCAST.
> > > > > >>> + le64 req_mac_table_set; // The number of requests with command VIRTIO_NET_CTRL_MAC_TABLE_SET.
> > > > > >>> + le64 req_mac_addr_set; // The number of requests with command VIRTIO_NET_CTRL_MAC_ADDR_SET.
> > > > > >>> + le64 req_vlan_add; // The number of requests with command VIRTIO_NET_CTRL_VLAN_ADD.
> > > > > >>> + le64 req_vlan_del; // The number of requests with command VIRTIO_NET_CTRL_VLAN_DEL.
> > > > > >>> + le64 req_announce_ack; // The number of requests with command VIRTIO_NET_CTRL_ANNOUNCE_ACK.
> > > > > >>> + le64 req_mq_vq_pairs_set; // The number of requests with command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET.
> > > > > >>> + le64 req_mq_rss_config; // The number of requests with command VIRTIO_NET_CTRL_MQ_RSS_CONFIG.
> > > > > >>> + le64 req_mq_hash_config; // The number of requests with command VIRTIO_NET_CTRL_MQ_HASH_CONFIG.
> > > > > >>> + le64 req_guest_offloads_set; // The number of requests with command VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET.
> > > > > >>> +}
> > > > > >>
> > > > > >> I just had an idea:
> > > > > >> how about the query passes in the command we are debugging instead?
> > > > > >> this way we do not need to extend this each time.
> > > > > >>
> > > > > > Do you mean command-specific-data uses a structure like this:
> > > > > >
> > > > > > {
> > > > > > le64 class;
> > > > > > le64 command;
> > > > > > }
> > > > > >
> > > > > > This is indeed a really great idea.
> > > > >
> > > > >
> > > > > This probably only work if we mandate the dependency to stats for any
> > > > > new added control vq features.
> > > > >
> > > >
> > > > For new commands, if the device does not support it, then doing so will
> > > > definitely get an ERR. If the device supports it, we don't need to modify the
> > > > spec. But this seems to be a problem for migration.
> > >
> > > Yes, as discussed, we need to keep migration compatibility here.
> > >
> > > >
> > > >
> > > > >
> > > > > >
> > > > > >
> > > > > >>
> > > > > >>
> > > > > >>> +
> > > > > >>> +struct virtio_net_ctrl_reply_stats_queue_pair {
> > > > > >>> + /* rx stats */
> > > > > >>> + le64 rx_packets; // The number of packets recived by device, including the dropped packets by device.
> > > > > >>> + le64 rx_bytes; // The number of bytes recived by device, including the dropped packets by device.
> > > > > >> typos: received
> > > > > >>
> > > > > >>
> > > > > >>> +
> > > > > >>> + le64 rx_notification; // The number of notifications from driver.
> > > > > >>> + le64 rx_interrupt; // The number of interrupts generated by device.
> > > > > >>> +
> > > > > >>> + le64 rx_drop; // The number of packets dropped by the rx queue. Contains all kinds of packet drop.
> > > > > >>> + le64 rx_drop_overruns; // The number of packets dropped by the rx queue when no more descriptors were available.
> > > > > >>> + le64 rx_drop_oversize; // The number of oversized packets received by the rx queue.
> > > > > >> What does oversized mean in this context? does it apply to
> > > > > >> mergeable buffers?
> > > > > > For mergeable buffers this statistic is meaningless.
> > > > >
> > > > >
> > > > > I guess not, we may run out of descriptors even in this case.
> > > > >
> > > >
> > > > I guess, you may not have noticed, that case should be rx_drop_overruns.
> > >
> > > Probably, but I wonder how much value it would be for maintaining two
> > > separate counters. Can we unify them?
> >
> > rx_drop_overruns: means the backend is busy.
> > rx_drop_oversize: means received an oversized package.
> >
> > So, I think we should keep these two.
>
> Given it's only without mergeable, will this be ever set
> in practice? I don't like wasting a counter on something never set.
OK, I see.
Thanks.
>
>
> > >
> > > >
> > > > >
> > > > > >
> > > > > >>> +
> > > > > >>> + le64 rx_csum_valid; // The number of packets with VIRTIO_NET_HDR_F_DATA_VALID.
> > > > > >>> + le64 rx_csum_partial; // The number of packets with VIRTIO_NET_HDR_F_NEEDS_CSUM.
> > > > > >>> + le64 rx_csum_bad; // The number of packets with abnormal csum.
> > > > > >>> + le64 rx_csum_none; // The number of packets without hardware csum.
> > > > > >> I assume they are only incremented with VIRTIO_NET_F_GUEST_CSUM?
> > > > > > Yes
> > > > > >
> > > > > >>> +
> > > > > >>> + le64 rx_gso_packets; // The number of gso packets received by rx.
> > > > > >> let's spell it out: I think this means any packet
> > > > > >> put into VQ and with gso_type != VIRTIO_NET_HDR_GSO_NONE
> > > > > > Yes
> > > > > >
> > > > > >
> > > > > >>> + le64 rx_gso_bytes; // The number of gso bytes received by rx.
> > > > > >> this one is a bit vague: I assume these are bytes written into the RX VQ buffers?
> > > > > >> the difference is that multiple packets are combined into a
> > > > > >> single gso packet.
> > > > > >> and does this include the virtio net header?
> > > > > > I think all *_bytes statistics do not include virtio net header, the packet
> > > > > > bytes we care about does not include virtio net header.
> > > > > >
> > > > > > Multiple packets are combined into one, and some network headers, such as
> > > > > > ip/tcp, etc., are also removed. The final count is the bytes that are finalized
> > > > > > to the RV VQ buffers.
> > > > > >
> > > > > >
> > > > > >>> + le64 rx_reset; // The number of queue resets.
> > > > > >>> +
> > > > > >>> + /* tx stats */
> > > > > >>> + le64 tx_packets; // The number of packets sent by device, excluding the dropped packets by device.
> > > > > >>> + le64 tx_bytes; // The number of bytes sent by device, excluding the dropped packets by device.
> > > > > >> same question: are we talking about bytes sent by device? or
> > > > > >> received from guest for transmission?
> > > > > > The number of bytes sent by device.
> > > > > >
> > > > > >>> +
> > > > > >>> + le64 tx_notification; // The number of notifications from driver.
> > > > > >>> + le64 tx_interrupt; // The number of interrupts generated by device.
> > > > > >>> +
> > > > > >>> + le64 tx_drop; // The number of packets dropped by the tx queue. Contains all kinds of packet drop.
> > > > > >>> + le64 tx_drop_desc_err; // The number of packets dropped when the descriptor is in an error state.
> > > > > >> what is a descriptor in error state?
> > > > > > such as len == 0.
> > > > > >
> > > > > >
> > > > > >>> +
> > > > > >>> + le64 tx_csum_none; // The number of packets that doesn't require hardware csum.
> > > > > >>> + le64 tx_csum_partial; // The number of packets that requires hardware csum.
> > > > > >>> +
> > > > > >>> + le64 tx_gso_packets; // The number of gso packets transmitted.
> > > > > >>> + le64 tx_gso_bytes; // The number of gso bytes transmitted.
> > > > > >> point is, gso packets are not transmitted. they are received from
> > > > > >> guest. is this what this means?
> > > > > > Yes.
> > > > >
> > > > >
> > > > > Or it could be case of TSO in the case of TX?
> > > >
> > > >
> > > > Will TSO be anything special?
> > >
> > > For real hardware: it won't transmit GSO packets, but it can do
> > > hardware segmentation. I meant we could cover this in this counter.
> > > For software devices: it can transmit GSO packets.
> >
> >
> > Oh thanks, I forgot about this situation.
> >
> > tx_gso_* of course includes the case of TSO. I will explain this in the next
> > version.
> >
> > Thanks.
> >
> > >
> > > Thanks
> > >
> > > >
> > > > Thanks.
> > > >
> > > > >
> > > > > Thanks
> > > > >
> > > > >
> > > > > >
> > > > > >> gso bytes probably somehow
> > > > > >> means bytes in gso packets, but again this is a bit vague.
> > > > > > It should be defined, I think it should be defined as the number of bytes from
> > > > > > the guest.
> > > > > >
> > > > > >
> > > > > >>> + le64 tx_reset; // The number of queue resets.
> > > > > >> queue reset counter sounds like a useful generic capability.
> > > > > >> is this with the new features jason added recently?
> > > > > >> can we add it to all devices?
> > > > > > It's the one I submitted earlier.
> > > > > >
> > > > > > https://github.com/oasis-tcs/virtio-spec/issues/124
> > > > > >
> > > > > > The purpose of adding this is that the network device will disable/enable the
> > > > > > queue. The statistics of the corresponding device is queue_reset.
> > > > > >
> > > > > > Thank you very much.
> > > > > >
> > > > > >>> +}
> > > > > >>> +\end{lstlisting}
> > > > > >>> +
> > > > > >>> +All device stats are divided into three categories:
> > > > > >>> +\begin{itemize}
> > > > > >>> + \item the stats of the device.
> > > > > >>> + \begin{itemize}
> > > > > >>> + \item command: VIRTIO_NET_CTRL_STATS_GET_DEV
> > > > > >>> + \item command-specific-data-reply structure: virtio_net_ctrl_reply_stats_dev
> > > > > >>> + \end{itemize}
> > > > > >>> +
> > > > > >>> + \item the stats of the controlq.
> > > > > >>> + \begin{itemize}
> > > > > >>> + \item command: VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ
> > > > > >>> + \item command-specific-data-reply structure: virtio_net_ctrl_reply_stats_cvq
> > > > > >>> + \end{itemize}
> > > > > >>> +
> > > > > >>> + \item the stats of the queue pair. This contains the stats of rx and tx.
> > > > > >>> + \begin{itemize}
> > > > > >>> + \item command: VIRTIO_NET_CTRL_STATS_GET_QUEUE_PAIR
> > > > > >>> + \item command-specific-data structure: virtio_net_ctrl_stats_queue_pair
> > > > > >>> + \item command-specific-data-reply structure: virtio_net_ctrl_reply_stats_queue_pair
> > > > > >>> + \end{itemize}
> > > > > >>> +\end{itemize}
> > > > > >>> +
> > > > > >>> +\devicenormative{\subparagraph}{Device stats}{Device Types / Network Device / Device Operation / Control Virtqueue / Device stats}
> > > > > >>> +If \field{queue_pair_index} is out of range for a
> > > > > >>> +VIRTIO_NET_CTRL_STATS_GET_QUEUE_PAIR command, the device MUST set \field{ack} in
> > > > > >>> +virtio_net_ctrl to VIRTIO_NET_ERR.
> > > > > >>> +
> > > > > >>> +If VIRTIO_NET_F_CTRL_STATS has been negotiated, the device MUST support the
> > > > > >>> +VIRTIO_NET_CTRL_STATS_GET_DEV, VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ and
> > > > > >>> +VIRTIO_NET_CTRL_STATS_GET_QUEUE_PAIR commands.
> > > > > >>> +
> > > > > >>> +\drivernormative{\subparagraph}{Device stats}{Device Types / Network Device / Device Operation / Control Virtqueue / Device stats}
> > > > > >>> +
> > > > > >>> +\field{command-specific-data} MUST be empty for VIRTIO_NET_CTRL_STATS_GET_DEV
> > > > > >>> +and VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ.
> > > > > >>>
> > > > > >>> \subsubsection{Legacy Interface: Framing Requirements}\label{sec:Device
> > > > > >>> Types / Network Device / Legacy Interface: Framing Requirements}
> > > > > >>> --
> > > > > >>> 2.31.0
> > > > > >>>
> > > > > >>>
> > > > > >>> ---------------------------------------------------------------------
> > > > > >>> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > > > > >>> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> > > > >
> > > >
> > > > ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> > > >
> > >
>
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]