[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [RFC v2] virtio-net: Add RoCE (RDMA over Converged Ethernet) support
Hi all,
This RFC aims to introduce our recent work on enabling RoCE support
for virtio-net device.
To support RoCE, three types of virtqueues including RDMA send virtqueue,
RDMA receive virtqueue and RDMA completion virtqueue are introduced.
And control virtqueue is reused to support the RDMA control messages.
Now we support some basic RDMA semantics such as send/receive
and read/write operation.
To test with our demo:
1. Build Guest kernel [1] with config INFINIBAND_VIRTIO_RDMA
2. Build QEMU [2] with config VHOST_USER_RDMA
3. Build rdma-core [3]
4. Build and install DPDK (NOTE that we only tested on DPDK 20.11.3)
5. Build vhost-user-rdma [4]
6. Run vhost-user-rdma with command:
$ ./vhost-user-rdma --vdev 'net_tap0' --lcore '1-3' -- -s '/tmp/vhost-rdma0'
7. Run qemu with command:
$ qemu-system-x86_64 -chardev socket,path=/tmp/vhost-rdma0,id=vrdma \
-device vhost-user-rdma-pci,page-per-vq,chardev=vrdma ...
[1] https://github.com/bytedance/linux/tree/virtio-net-roce
[2] https://github.com/bytedance/qemu/tree/vhost-user-rdma
[3] https://github.com/YongjiXie/rdma-core/tree/virtio-rdma
[4] https://github.com/YongjiXie/vhost-user-rdma
We have already tested it with ibv_rc_pingpong, ibv_ud_pingpong and some
others in rdma-core.
TODO:
1. Add support for Base Memory Management Extensions
2. Add support for atomic operation
3. Add support for SRQ
4. Add support for virtqueue resize
5. Add support for enabling/disabling virtqueue at runtime
Please review, thanks!
V1 to V2:
- Rework the implementation via extending virtio-net instead of
introducing a new device type [Jason]
- Add address handle support
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Co-developed-by: Wei Junji <weijunji@bytedance.com>
Signed-off-by: Wei Junji <weijunji@bytedance.com>
---
content.tex | 858 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 854 insertions(+), 4 deletions(-)
diff --git a/content.tex b/content.tex
index 7508dd1..646d82a 100644
--- a/content.tex
+++ b/content.tex
@@ -3008,7 +3008,10 @@ \section{Network Device}\label{sec:Device Types / Network Device}
placed in one virtqueue for receiving packets, and outgoing
packets are enqueued into another for transmission in that order.
A third command queue is used to control advanced filtering
-features.
+features. And if RoCE (RDMA over Converged Ethernet) capability
+is enabled, the virtio network device can also support transmitting
+and receiving RDMA message through RDMA send virtqueue, RDMA receive
+virtqueue and RDMA completion virtqueue.
\subsection{Device ID}\label{sec:Device Types / Network Device / Device ID}
@@ -3023,13 +3026,24 @@ \subsection{Virtqueues}\label{sec:Device Types / Network Device / Virtqueues}
\item[2(N-1)] receiveqN
\item[2(N-1)+1] transmitqN
\item[2N] controlq
+\item[2N+1] rdma_completeq1
+\item[\ldots]
+\item[2N+M] rdma_completeqM
+\item[2N+M+1] rdma_transmitq1
+\item[2N+M+2] rdma_receiveq1
+\item[\ldots]
+\item[2N+M+2L-1] rdma_transmitqL
+\item[2N+M+2L] rdma_receiveqL
\end{description}
N=1 if neither VIRTIO_NET_F_MQ nor VIRTIO_NET_F_RSS are negotiated, otherwise N is set by
- \field{max_virtqueue_pairs}.
+ \field{max_virtqueue_pairs}. M is set by \field{max_rdma_cqs} and L is set by
+ \field{max_rdma_qps}.
controlq only exists if VIRTIO_NET_F_CTRL_VQ set.
+ rdma_completeq, rdma_transmitq and rdma_receiveq only exist if VIRTIO_NET_F_ROCE set
+
\subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits}
\begin{description}
@@ -3084,6 +3098,9 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits
\item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
channel.
+\item[VIRTIO_NET_F_ROCE(55)] Device supports RoCE (RDMA over Converged Ethernet)
+ capability.
+
\item[VIRTIO_NET_F_HOST_USO (56)] Device can receive USO packets. Unlike UFO
(fragmenting the packet) the USO splits large UDP packet
to several segments when each of these smaller packets has UDP header.
@@ -3129,6 +3146,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device
\item[VIRTIO_NET_F_GUEST_ANNOUNCE] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_MQ] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_CTRL_MAC_ADDR] Requires VIRTIO_NET_F_CTRL_VQ.
+\item[VIRTIO_NET_F_ROCE] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_RSC_EXT] Requires VIRTIO_NET_F_HOST_TSO4 or VIRTIO_NET_F_HOST_TSO6.
\item[VIRTIO_NET_F_RSS] Requires VIRTIO_NET_F_CTRL_VQ.
\end{description}
@@ -3190,6 +3208,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
u8 rss_max_key_size;
le16 rss_max_indirection_table_length;
le32 supported_hash_types;
+ le32 max_rdma_qps;
+ le32 max_rdma_cps;
};
\end{lstlisting}
The following field, \field{rss_max_key_size} only exists if VIRTIO_NET_F_RSS or VIRTIO_NET_F_HASH_REPORT is set.
@@ -3204,11 +3224,23 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
Field \field{supported_hash_types} contains the bitmask of supported hash types.
See \ref{sec:Device Types / Network Device / Device Operation / Processing of Incoming Packets / Hash calculation for incoming packets / Supported/enabled hash types} for details of supported hash types.
+Field \field{max_rdma_qps} only exists if VIRTIO_NET_F_ROCE is set.
+It specifies the maximum number of queue pairs (send virtqueue and receive virtqueue) for RoCE usage.
+
+Field \field{max_rdma_cqs} only exists if VIRTIO_NET_F_ROCE is set.
+It specifies the maximum number of completion virtqueue for RoCE usage.
+
\devicenormative{\subsubsection}{Device configuration layout}{Device Types / Network Device / Device configuration layout}
The device MUST set \field{max_virtqueue_pairs} to between 1 and 0x8000 inclusive,
if it offers VIRTIO_NET_F_MQ.
+The device MUST set \field{max_rdma_qps} to between 1 an 16384 inclusive,
+if it offers VIRTIO_NET_F_ROCE.
+
+The device MUST set \field{max_rdma_cqs} to between 1 an 16384 inclusive,
+if it offers VIRTIO_NET_F_ROCE.
+
The device MUST set \field{mtu} to between 68 and 65535 inclusive,
if it offers VIRTIO_NET_F_MTU.
@@ -3306,6 +3338,12 @@ \subsection{Device Initialization}\label{sec:Device Types / Network Device / Dev
\item If the VIRTIO_NET_F_CTRL_VQ feature bit is negotiated,
identify the control virtqueue.
+\item If the VIRTIO_NET_F_ROCE feature bit is negotiated,
+ identify the the RDMA completion virtqueues, up to max_rdma_cqs.
+
+\item If the VIRTIO_NET_F_ROCE feature bit is negotiated,
+ identify the the RDMA send and receive virtqueues, up to max_rdma_qps.
+
\item Fill the receive queues with buffers: see \ref{sec:Device Types / Network Device / Device Operation / Setting Up Receive Buffers}.
\item Even with VIRTIO_NET_F_MQ, only receiveq1, transmitq1 and
@@ -4007,6 +4045,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
u8 command;
u8 command-specific-data[];
u8 ack;
+ u8 ack-specific-data[];
};
/* ack values */
@@ -4015,8 +4054,8 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
\end{lstlisting}
The \field{class}, \field{command} and command-specific-data are set by the
-driver, and the device sets the \field{ack} byte. There is little it can
-do except issue a diagnostic if \field{ack} is not
+driver, and the device sets the \field{ack} byte and ack-specific-data. There
+is little it can do except issue a diagnostic if \field{ack} is not
VIRTIO_NET_OK.
\paragraph{Packet Receive Filtering}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Packet Receive Filtering}
@@ -4463,6 +4502,534 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
according to the native endian of the guest rather than
(necessarily when not using the legacy interface) little-endian.
+\paragraph{RoCE Configuration}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / RoCE Configuration}
+
+If the driver negotiates the VIRTIO_NET_F_ROCE feature bit (depends on VIRTIO_NET_F_CTRL_VQ),
+it can send control commands for RoCE usage. The following commands are defined now:
+
+\begin{lstlisting}
+#define VIRTIO_NET_CTRL_ROCE 6
+ #define VIRTIO_NET_CTRL_ROCE_QUERY_DEVICE 0
+ #define VIRTIO_NET_CTRL_ROCE_QUERY_PORT 1
+ #define VIRTIO_NET_CTRL_ROCE_CREATE_CQ 2
+ #define VIRTIO_NET_CTRL_ROCE_DESTROY_CQ 3
+ #define VIRTIO_NET_CTRL_ROCE_CREATE_PD 4
+ #define VIRTIO_NET_CTRL_ROCE_DESTROY_PD 5
+ #define VIRTIO_NET_CTRL_ROCE_GET_DMA_MR 6
+ #define VIRTIO_NET_CTRL_ROCE_REG_USER_MR 7
+ #define VIRTIO_NET_CTRL_ROCE_DEREG_MR 8
+ #define VIRTIO_NET_CTRL_ROCE_CREATE_QP 9
+ #define VIRTIO_NET_CTRL_ROCE_MODIFY_QP 10
+ #define VIRTIO_NET_CTRL_ROCE_QUERY_QP 11
+ #define VIRTIO_NET_CTRL_ROCE_DESTROY_QP 12
+ #define VIRTIO_NET_CTRL_ROCE_CREATE_AH 13
+ #define VIRTIO_NET_CTRL_ROCE_DESTROY_AH 14
+ #define VIRTIO_NET_CTRL_ROCE_ADD_GID 15
+ #define VIRTIO_NET_CTRL_ROCE_DEL_GID 16
+ #define VIRTIO_NET_CTRL_ROCE_REQ_NOTIFY_CQ 17
+\end{lstlisting}
+
+\begin{description}
+\item[VIRTIO_NET_CTRL_ROCE_QUERY_DEVICE] Query the attributes of device.
+ No command-specific-data;
+ the ack-specific-data is \field{struct virtio_rdma_ack_query_device}.
+
+\begin{lstlisting}
+struct virtio_rdma_ack_query_device {
+#define VIRTIO_IB_DEVICE_RC_RNR_NAK_GEN (1 << 0)
+ /* Capabilities mask */
+ le64 device_cap_flags;
+ /* Largest contiguous block that can be registered */
+ le64 max_mr_size;
+ /* Supported memory shift sizes */
+ le64 page_size_cap;
+ /* Hardware version */
+ le32 hw_ver;
+ /* Maximum number of outstanding Work Requests (WR) on Send Queue (SQ) and Receive Queue (RQ) */
+ le32 max_qp_wr;
+ /* Maximum number of scatter/gather (s/g) elements per WR for SQ for non RDMA Read operations */
+ le32 max_send_sge;
+ /* Maximum number of s/g elements per WR for RQ for non RDMA Read operations */
+ le32 max_recv_sge;
+ /* Maximum number of s/g per WR for RDMA Read operations */
+ le32 max_sge_rd;
+ /* Maximum size of Completion Queue (CQ) */
+ le32 max_cqe;
+ /* Maximum number of Memory Regions (MR) */
+ le32 max_mr;
+ /* Maximum number of Protection Domains (PD) */
+ le32 max_pd;
+ /* Maximum number of RDMA Read perations that can be outstanding per Queue Pair (QP) */
+ le32 max_qp_rd_atom;
+ /* Maximum depth per QP for initiation of RDMA Read operations */
+ le32 max_qp_init_rd_atom;
+ /* Maximum number of Address Handles (AH) */
+ le32 max_ah;
+ /* Local CA ack delay */
+ u8 local_ca_ack_delay;
+ /* Padding */
+ u8 padding[3];
+ /* Reserved for future */
+ le32 reserved[14];
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_QUERY_PORT] Query the attributes of port.
+ No command-specific-data;
+ the ack-specific-data is \field{struct virtio_rdma_ack_query_port}.
+
+\begin{lstlisting}
+struct virtio_rdma_ack_query_port {
+ /* Length of source Global Identifier (GID) table */
+ le32 gid_tbl_len;
+ /* Maximum message size */
+ le32 max_msg_sz;
+ /* Reserved for future */
+ le32 reserved[6];
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_CREATE_CQ] Create a Completion Queue (CQ).
+ The command-specific-data is \field{struct virtio_rdma_cmd_create_cq};
+ the ack-specific-data is \field{struct virtio_rdma_ack_create_cq}.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_create_cq {
+ /* Size of CQ */
+ le32 cqe;
+};
+
+struct virtio_rdma_ack_create_cq {
+ /* The index of CQ */
+ le32 cqn;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_DESTROY_CQ] Destroy a Completion Queue.
+ The command-specific-data is \field{struct virtio_rdma_cmd_destroy_cq};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_destroy_cq {
+ /* The index of CQ */
+ le32 cqn;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_CREATE_PD] Create a Protection Domain (PD).
+ No command-specific-data;
+ the ack-specific-data is \field{struct virtio_rdma_ack_create_pd}.
+
+\begin{lstlisting}
+struct virtio_rdma_ack_create_pd {
+ /* The handle of PD */
+ le32 pdn;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_DESTORY_PD] Destroy a Protection Domain.
+ The command-specific-data is \field{virtio_rdma_cmd_destroy_pd};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_destroy_pd {
+ /* The handle of PD */
+ le32 pdn;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_GET_DMA_MR] Get the DMA Memory Region (MR).
+ associated with one protection domain.
+ The command-specific-data is \field{virtio_rdma_cmd_get_dma_mr};
+ the ack-specific-data is \field{virtio_rdma_ack_get_dma_mr}.
+
+\begin{lstlisting}
+enum virtio_ib_access_flags {
+ VIRTIO_IB_ACCESS_LOCAL_WRITE = (1 << 0),
+ VIRTIO_IB_ACCESS_REMOTE_WRITE = (1 << 1),
+ VIRTIO_IB_ACCESS_REMOTE_READ = (1 << 2),
+};
+
+struct virtio_rdma_cmd_get_dma_mr {
+ /* The handle of PD which the MR associated with */
+ le32 pdn;
+ /* MR's protection attributes, enum virtio_ib_access_flags */
+ le32 access_flags;
+};
+
+struct virtio_rdma_ack_get_dma_mr {
+ /* The handle of MR */
+ le32 mrn;
+ /* MR's local access key */
+ le32 lkey;
+ /* MR's remote access key */
+ le32 rkey;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_REG_USER_MR] Register a user Memory Region
+ associated with one Protection Domain.
+ The command-specific-data is \field{virtio_rdma_cmd_reg_user_mr};
+ the ack-specific-data is \field{virtio_rdma_ack_reg_user_mr}.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_reg_user_mr {
+ /* The handle of PD which the MR associated with */
+ le32 pdn;
+ /* MR's protection attributes, enum virtio_ib_access_flags */
+ le32 access_flags;
+ /* Starting virtual address of MR */
+ le64 virt_addr;
+ /* Length of MR */
+ le64 length;
+ /* Size of the below page array */
+ le32 npages;
+ /* Padding */
+ le32 padding;
+ /* Array to store physical address of each page in MR */
+ le64 pages[];
+};
+
+struct virtio_rdma_ack_reg_user_mr {
+ /* The handle of MR */
+ le32 mrn;
+ /* MR's local access key */
+ le32 lkey;
+ /* MR's remote access key */
+ le32 rkey;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_DEREG_MR] De-register a Memory Region.
+ The command-specific-data is \field{virtio_rdma_cmd_dereg_mr};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_dereg_mr {
+ /* The handle of MR */
+ le32 mrn;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_CREATE_QP] Create a Queue Pair (Send Queue and Receive Queue).
+ The command-specific-data is \field{virtio_rdma_cmd_create_qp};
+ the ack-specific-data is \field{virtio_rdma_ack_create_qp}.
+
+\begin{lstlisting}
+struct virtio_rdma_qp_cap {
+ /* Maximum number of outstanding WRs in SQ */
+ le32 max_send_wr;
+ /* Maximum number of outstanding WRs in RQ */
+ le32 max_recv_wr;
+ /* Maximum number of s/g elements per WR in SQ */
+ le32 max_send_sge;
+ /* Maximum number of s/g elements per WR in RQ */
+ le32 max_recv_sge;
+ /* Maximum number of data (bytes) that can be posted inline to SQ */
+ le32 max_inline_data;
+ /* Padding */
+ le32 padding;
+};
+
+struct virtio_rdma_cmd_create_qp {
+ /* The handle of PD which the QP associated with */
+ le32 pdn;
+#define VIRTIO_IB_QPT_SMI 0
+#define VIRTIO_IB_QPT_GSI 1
+#define VIRTIO_IB_QPT_RC 2
+#define VIRTIO_IB_QPT_UC 3
+#define VIRTIO_IB_QPT_UD 4
+ /* QP's type */
+ u8 qp_type;
+ /* If set, each WR submitted to the SQ generates a completion entry */
+ u8 sq_sig_all;
+ /* Padding */
+ u8 padding[2];
+ /* The index of CQ which the SQ associated with */
+ le32 send_cqn;
+ /* The index of CQ which the RQ associated with */
+ le32 recv_cqn;
+ /* QP's capabilities */
+ struct virtio_rdma_qp_cap cap;
+ /* Reserved for future */
+ le32 reserved[4];
+};
+
+struct virtio_rdma_ack_create_qp {
+ /* The index of QP */
+ le32 qpn;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_MODIFY_QP] Modify the attributes of a Queue Pair.
+ The command-specific-data is \field{virtio_rdma_cmd_modify_qp};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_global_route {
+ /* Destination GID or MGID */
+ u8 dgid[16];
+ /* Flow label */
+ le32 flow_label;
+ /* Source GID index */
+ u8 sgid_index;
+ /* Hop limit */
+ u8 hop_limit;
+ /* Traffic class */
+ u8 traffic_class;
+ /* Padding */
+ u8 padding;
+};
+
+struct virtio_rdma_ah_attr {
+ /* Global Routing Header (GRH) attributes */
+ virtio_rdma_global_route grh;
+ /* Destination MAC address */
+ u8 dmac[6];
+ /* Reserved for future */
+ u8 reserved[10];
+};
+
+enum virtio_ib_qp_attr_mask {
+ VIRTIO_IB_QP_STATE = (1 << 0),
+ VIRTIO_IB_QP_CUR_STATE = (1 << 1),
+ VIRTIO_IB_QP_ACCESS_FLAGS = (1 << 2),
+ VIRTIO_IB_QP_QKEY = (1 << 3),
+ VIRTIO_IB_QP_AV = (1 << 4),
+ VIRTIO_IB_QP_PATH_MTU = (1 << 5),
+ VIRTIO_IB_QP_TIMEOUT = (1 << 6),
+ VIRTIO_IB_QP_RETRY_CNT = (1 << 7),
+ VIRTIO_IB_QP_RNR_RETRY = (1 << 8),
+ VIRTIO_IB_QP_RQ_PSN = (1 << 9),
+ VIRTIO_IB_QP_MAX_QP_RD_ATOMIC = (1 << 10),
+ VIRTIO_IB_QP_MIN_RNR_TIMER = (1 << 11),
+ VIRTIO_IB_QP_SQ_PSN = (1 << 12),
+ VIRTIO_IB_QP_MAX_DEST_RD_ATOMIC = (1 << 13),
+ VIRTIO_IB_QP_CAP = (1 << 14),
+ VIRTIO_IB_QP_DEST_QPN = (1 << 15),
+ VIRTIO_IB_QP_RATE_LIMIT = (1 << 16),
+};
+
+enum virtio_ib_qp_state {
+ VIRTIO_IB_QPS_RESET,
+ VIRTIO_IB_QPS_INIT,
+ VIRTIO_IB_QPS_RTR,
+ VIRTIO_IB_QPS_RTS,
+ VIRTIO_IB_QPS_SQD,
+ VIRTIO_IB_QPS_SQE,
+ VIRTIO_IB_QPS_ERR
+};
+
+enum virtio_ib_mtu {
+ VIRTIO_IB_MTU_256 = 1,
+ VIRTIO_IB_MTU_512 = 2,
+ VIRTIO_IB_MTU_1024 = 3,
+ VIRTIO_IB_MTU_2048 = 4,
+ VIRTIO_IB_MTU_4096 = 5
+};
+
+struct virtio_rdma_cmd_modify_qp {
+ /* The index of QP */
+ le32 qpn;
+ /* The mask of attributes needs to be modified, enum virtio_ib_qp_attr_mask */
+ le32 attr_mask;
+ /* Move the QP to this state, enum virtio_ib_qp_state */
+ u8 qp_state;
+ /* Current QP state, enum virtio_ib_qp_state */
+ u8 cur_qp_state;
+ /* Path MTU (valid only for RC/UC QPs), enum virtio_ib_mtu */
+ u8 path_mtu;
+ /* Number of outstanding RDMA Read operations on destination QP (valid only for RC QPs) */
+ u8 max_rd_atomic;
+ /* Number of responder resources for handling incoming RDMA Read operations (valid only for RC QPs) */
+ u8 max_dest_rd_atomic;
+ /* Minimum RNR (Receiver Not Ready) NAK timer (valid only for RC QPs) */
+ u8 min_rnr_timer;
+ /* Local ack timeout (valid only for RC QPs) */
+ u8 timeout;
+ /* Retry count (valid only for RC QPs) */
+ u8 retry_cnt;
+ /* RNR retry (valid only for RC QPs) */
+ u8 rnr_retry;
+ /* Padding */
+ u8 padding[7];
+ /* Q_Key for the QP (valid only for UD QPs) */
+ le32 qkey;
+ /* PSN for RQ (valid only for RC/UC QPs) */
+ le32 rq_psn;
+ /* PSN for SQ */
+ le32 sq_psn;
+ /* Destination QP number (valid only for RC/UC QPs) */
+ le32 dest_qp_num;
+ /* Mask of enabled remote access operations (valid only for RC/UC QPs), enum virtio_ib_access_flags */
+ le32 qp_access_flags;
+ /* Rate limit in kbps for packet pacing */
+ le32 rate_limit;
+ /* QP capabilities */
+ struct virtio_rdma_qp_cap cap;
+ /* Address Vector (valid only for RC/UC QPs) */
+ struct virtio_rdma_ah_attr ah_attr;
+ /* Reserved for future */
+ le32 reserved[4];
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_QUERY_QP] Query the attributes of a Queue Pair.
+ The command-specific-data is \field{virtio_rdma_cmd_query_qp};
+ the ack-specific-data is \field{virtio_rdma_ack_query_qp}.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_query_qp {
+ /* The index of QP */
+ le32 qpn;
+ /* The mask of attributes need to be queried, enum virtio_ib_qp_attr_mask */
+ le32 attr_mask;
+};
+
+struct virtio_rdma_ack_query_qp {
+ /* Move the QP to this state, enum virtio_ib_qp_state */
+ u8 qp_state;
+ /* Path MTU (valid only for RC/UC QPs), enum virtio_ib_mtu */
+ u8 path_mtu;
+ /* Is the SQ draining */
+ u8 sq_draining;
+ /* Number of outstanding RDMA read operations on destination QP (valid only for RC QPs) */
+ u8 max_rd_atomic;
+ /* Number of responder resources for handling incoming RDMA read operations (valid only for RC QPs) */
+ u8 max_dest_rd_atomic;
+ /* Minimum RNR NAK timer (valid only for RC QPs) */
+ u8 min_rnr_timer;
+ /* Local ack timeout (valid only for RC QPs) */
+ u8 timeout;
+ /* Retry count (valid only for RC QPs) */
+ u8 retry_cnt;
+ /* RNR retry (valid only for RC QPs) */
+ u8 rnr_retry;
+ /* Padding */
+ u8 padding[7];
+ /* Q_Key for the QP (valid only for UD QPs) */
+ le32 qkey;
+ /* PSN for RQ (valid only for RC/UC QPs) */
+ le32 rq_psn;
+ /* PSN for SQ */
+ le32 sq_psn;
+ /* Destination QP number (valid only for RC/UC QPs) */
+ le32 dest_qp_num;
+ /* Mask of enabled remote access operations (valid only for RC/UC QPs), enum virtio_ib_access_flags */
+ le32 qp_access_flags;
+ /* Rate limit in kbps for packet pacing */
+ le32 rate_limit;
+ /* QP capabilities */
+ struct virtio_rdma_qp_cap cap;
+ /* Address Vector (valid only for RC/UC QPs) */
+ struct virtio_rdma_ah_attr ah_attr;
+ /* Reserved for future */
+ le32 reserved[4];
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_DESTROY_QP] Destroy a Queue Pair.
+ The command-specific-data is \field{virtio_rdma_cmd_destroy_qp};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_destroy_qp {
+ /* The index of QP */
+ le32 qpn;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_CREATE_AH] Create a Address Handle (AH).
+ The command-specific-data is \field{virtio_rdma_cmd_create_ah};
+ the ack-specific-data is \field{virtio_rdma_ack_create_ah}.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_create_ah {
+ /* The handle of PD which the AH associated with */
+ le32 pdn;
+ /* Padding */
+ le32 padding;
+ /* Address Vector */
+ struct virtio_rdma_ah_attr ah_attr;
+};
+
+struct virtio_rdma_ack_create_ah {
+ /* The address handle */
+ le32 ah;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_DESTROY_AH] Destroy a Address Handle.
+ The command-specific-data is \field{virtio_rdma_cmd_destroy_ah};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_destroy_ah {
+ /* The handle of PD which the AH associated with */
+ le32 pdn;
+ /* The address handle */
+ le32 ah;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_ADD_GID] Add a Global Identifier (GID).
+ The command-specific-data is \field{virtio_rdma_cmd_add_gid};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_add_gid {
+ /* Index of GID */
+ le16 index;
+ /* Padding */
+ le16 padding[3];
+ /* GID to be added */
+ u8 gid[16];
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_DEL_GID] Delete a Global Identifier.
+ The command-specific-data is \field{virtio_rdma_cmd_del_gid};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_del_gid {
+ /* Index of GID */
+ le16 index;
+};
+\end{lstlisting}
+
+\item[VIRTIO_NET_CTRL_ROCE_REQ_NOTIFY_CQ] Request a completion notification
+ on a Completion Queue.
+ The command-specific-data is \field{virtio_rdma_cmd_req_notify};
+ no ack-specific-data.
+
+\begin{lstlisting}
+struct virtio_rdma_cmd_req_notify {
+ /* The index of CQ */
+ le32 cqn;
+#define VIRTIO_IB_NOTIFY_SOLICITED (1 << 0)
+#define VIRTIO_IB_NOTIFY_NEXT_COMPLETION (1 << 1)
+ /* Notify flags */
+ le32 flags;
+};
+\end{lstlisting}
+
+\end{description}
+
+\drivernormative{\subparagraph}{RoCE Configuration}{Device Types / Network Device / Device Operation / Control Virtqueue / RoCE Configuration}
+
+A driver MUST initialize the completion virtqueue and fill it with
+enough entries after command VIRTIO_NET_CTRL_ROCE_CREATE_CQ is
+successfully executed.
+
+A driver MUST reset the completion virtqueue after
+command VIRTIO_NET_CTRL_ROCE_DESTROY_CQ is successfully executed.
+
+A driver MUST initialize the send virtqueue and receive virtqueue after
+command VIRTIO_NET_CTRL_ROCE_CREATE_QP is successfully executed.
+
+A driver MUST reset the send virtqueue and receive virtqueue after
+command VIRTIO_NET_CTRL_ROCE_DESTROY_QP is successfully executed.
\subsubsection{Legacy Interface: Framing Requirements}\label{sec:Device
Types / Network Device / Legacy Interface: Framing Requirements}
@@ -4496,6 +5063,289 @@ \subsubsection{Legacy Interface: Framing Requirements}\label{sec:Device
See \ref{sec:Basic
Facilities of a Virtio Device / Virtqueues / Message Framing}.
+\subsubsection{RoCE Support}\label{sec:Device Types / Network Device / Device Operation / RoCE Support}
+
+RDMA over Converged Ethernet (RoCE) is a network protocol that allows
+remote direct memory access (RDMA) over an Ethernet network. To support
+RoCE (if VIRTIO_NET_F_ROCE is negotiated), in addtion to the control
+virtqueue support mentioned in \ref{sec:Device Types / Network Device /
+Device Operation / Control Virtqueue / RoCE Configuration}, multiple
+types of virtqueues including send virtqueue, receive virtqueue and
+completion virtqueue are introduced.
+
+The send virtqueue contains elements that describe the data to be
+transmitted.
+
+Requests (device-readable) have the following format:
+
+\begin{lstlisting}
+enum virtio_ib_wr_opcode {
+ VIRTIO_IB_WR_RDMA_WRITE,
+ VIRTIO_IB_WR_RDMA_WRITE_WITH_IMM,
+ VIRTIO_IB_WR_SEND,
+ VIRTIO_IB_WR_SEND_WITH_IMM,
+ VIRTIO_IB_WR_RDMA_READ,
+};
+
+struct virtio_rdma_sge {
+ le64 addr;
+ le32 length;
+ le32 lkey;
+};
+
+struct virtio_rdma_sq_req {
+ /* User defined WR ID */
+ le64 wr_id;
+ /* WR opcode, enum virtio_ib_wr_opcode */
+ u8 opcode;
+#define VIRTIO_IB_SEND_FENCE (1 << 0)
+#define VIRTIO_IB_SEND_SIGNALED (1 << 1)
+#define VIRTIO_IB_SEND_SOLICITED (1 << 2)
+#define VIRTIO_IB_SEND_INLINE (1 << 3)
+ /* Flags of the WR properties */
+ u8 send_flags;
+ /* Padding */
+ le16 padding;
+ /* Immediate data (in network byte order) to send */
+ le32 imm_data;
+ union {
+ struct {
+ /* Start address of remote memory buffer */
+ le64 remote_addr;
+ /* Key of the remote MR */
+ le32 rkey;
+ } rdma;
+ struct {
+ /* Index of the destination QP */
+ le32 remote_qpn;
+ /* Q_Key of the destination QP */
+ le32 remote_qkey;
+ /* Address Handle */
+ le32 ah;
+ } ud;
+ /* Reserved for future */
+ le64 reserved[4];
+ };
+ /* Inline data */
+ u8 inline_data[512];
+ union {
+ /* Length of sg_list */
+ le32 num_sge;
+ /* Length of inline data */
+ le16 inline_len;
+ };
+ /* Reserved for future */
+ le32 reserved2[3];
+ /* Scatter/gather list */
+ struct virtio_rdma_sge sg_list[];
+};
+\end{lstlisting}
+
+The receive virtqueue contains elements that describe where to place incoming data.
+
+Requests (device-readable) have the following format:
+
+\begin{lstlisting}
+struct virtio_rdma_rq_req {
+ /* User defined WR ID */
+ le64 wr_id;
+ /* Length of sg_list */
+ le32 num_sge;
+ /* Reserved for future */
+ le32 reserved[3];
+ /* Scatter/gather list */
+ struct virtio_rdma_sge sg_list[];
+};
+\end{lstlisting}
+
+The completion virtqueue is used to notify the completion of requests in
+send virtqueue or receive virtqueue.
+
+Requests (device-writable) have the following format:
+
+\begin{lstlisting}
+enum virtio_ib_wc_opcode {
+ VIRTIO_IB_WC_SEND,
+ VIRTIO_IB_WC_RDMA_WRITE,
+ VIRTIO_IB_WC_RDMA_READ,
+ VIRTIO_IB_WC_RECV,
+ VIRTIO_IB_WC_RECV_RDMA_WITH_IMM,
+};
+
+enum virtio_ib_wc_status {
+ /* Operation completed successfully */
+ VIRTIO_IB_WC_SUCCESS,
+ /* Local Length Error */
+ VIRTIO_IB_WC_LOC_LEN_ERR,
+ /* Local QP Operation Error */
+ VIRTIO_IB_WC_LOC_QP_OP_ERR,
+ /* Local Protection Error */
+ VIRTIO_IB_WC_LOC_PROT_ERR,
+ /* Work Request Flushed Error */
+ VIRTIO_IB_WC_WR_FLUSH_ERR,
+ /* Bad Response Error */
+ VIRTIO_IB_WC_BAD_RESP_ERR,
+ /* Local Access Error */
+ VIRTIO_IB_WC_LOC_ACCESS_ERR,
+ /* Remote Invalid Request Error */
+ VIRTIO_IB_WC_REM_INV_REQ_ERR,
+ /* Remote Access Error */
+ VIRTIO_IB_WC_REM_ACCESS_ERR,
+ /* Remote Operation Error */
+ VIRTIO_IB_WC_REM_OP_ERR,
+ /* Transport Retry Counter Exceeded */
+ VIRTIO_IB_WC_RETRY_EXC_ERR,
+ /* RNR Retry Counter Exceeded */
+ VIRTIO_IB_WC_RNR_RETRY_EXC_ERR,
+ /* Remote Aborted Error */
+ VIRTIO_IB_WC_REM_ABORT_ERR,
+ /* Fatal Error */
+ VIRTIO_IB_WC_FATAL_ERR,
+ /* Response Timeout Error */
+ VIRTIO_IB_WC_RESP_TIMEOUT_ERR,
+ /* General Error */
+ VIRTIO_IB_WC_GENERAL_ERR
+};
+
+struct virtio_rdma_cq_req {
+ /* User defined WR ID */
+ le64 wr_id;
+ /* Work completion status, enum virtio_ib_wc_status */
+ u8 status;
+ /* WR opcode, enum virtio_ib_wc_opcode */
+ u8 opcode;
+ /* Padding */
+ le16 padding;
+ /* Vendor error */
+ le32 vendor_err;
+ /* Number of bytes transferred */
+ le32 byte_len;
+ /* Immediate data (in network byte order) to send */
+ le32 imm_data;
+ /* Local QP number of completed WR */
+ le32 qp_num;
+ /* Source QP number (remote QP number) of completed WR (valid only for UD QPs) */
+ le32 src_qp;
+#define VIRTIO_IB_WC_GRH (1 << 0)
+#define VIRTIO_IB_WC_WITH_IMM (1 << 1)
+ /* Work completion flag */
+ le32 wc_flags;
+ /* Reserved for future */
+ le32 reserved[3];
+};
+\end{lstlisting}
+
+\paragraph{Send Operation}\label{sec:Device Types / Network Device / Device Operation / RoCE Support / Send Operation}
+
+The send operation allows us to send data to a remote QPâs Receive Queue.
+The receiver MUST have previously posted a receive buffer to receive the data.
+
+To do a send operation, a request with \field{opcode} set to
+VIRTIO_IB_WR_SEND or VIRTIO_IB_WR_SEND_WITH_IMM MUST be posted to the Send
+Queue as one output descriptor and the device is notified of the new entry.
+
+\drivernormative{\subparagraph}{Send Operation}{Device Types / Network Device / Device Operation / RoCE Support / Send Operation}
+
+If VIRTIO_IB_SEND_INLINE is set in \field{send_flags}, the driver MUST fill
+send buffer into \field{inline_data} field and set \field{inline_len} to the
+length of the buffer. Otherwise, the driver MUST fill \field{sg_list} to
+describe the buffer.
+
+\devicenormative{\subparagraph}{Send Operation}{Device Types / Network Device / Device Operation / RoCE Support / Send Operation}
+
+If \field{opcode} is not set to VIRTIO_IB_WR_SEND_WITH_IMM, the device MUST
+ignore \field{imm_data}.
+
+If the QP type is UD, the device MUST validate \field{ud.ah}.
+
+If VIRTIO_IB_SEND_INLINE is not set in \field{send_flags}, the device MUST
+validate the \field{addr}, \field{length} and \field{lkey} in \field{sg_list}.
+
+\paragraph{Receive Operation}\label{sec:Device Types / Network Device / Device Operation / RoCE Support / Receive Operation}
+
+The receive operation allows us to receive data from remote QP.
+It's the corresponding operation to a send operation.
+
+To do a receive operation, a request MUST be posted to the Receive
+Queue as one output descriptor and the device is notified of the new entry.
+
+\drivernormative{\subparagraph}{Receive Operation}{Device Types / Network Device / Device Operation / RoCE Support / Receive Operation}
+
+The driver MUST fill \field{sg_list} to describe the receive buffer.
+
+\devicenormative{\subparagraph}{Receive Operation}{Device Types / Network Device / Device Operation / RoCE Support / Receive Operation}
+
+The device MUST validate the \field{addr}, \field{length} and \field{lkey}
+in \field{sg_list}.
+
+\paragraph{Write Operation}\label{sec:Device Types / Network Device / Device Operation / RoCE Support / Write Operation}
+
+The write operation allows us to write data to the local memory buffer
+in remote side with no notification. The remote side wouldn't be aware
+that this operation being done.
+
+To do a write operation, a request with \field{opcode} set to
+VIRTIO_IB_WR_RDMA_WRITE or VIRTIO_IB_WR_RDMA_WRITE_WITH_IMM MUST be
+posted to the Send Queue as one output descriptor and the device is
+notified of the new entry.
+
+\drivernormative{\subparagraph}{Write Operation}{Device Types / Network Device / Device Operation / RoCE Support / Write Operation}
+
+The driver MUST fill \field{sg_list} to describe the write buffer.
+
+The driver MUST fill \field{rdma.remote_addr} and \field{rdma.rkey} to
+identify the remote buffer.
+
+\devicenormative{\subparagraph}{Write Operation}{Device Types / Network Device / Device Operation / RoCE Support / Write Operation}
+
+If \field{opcode} is not set to VIRTIO_IB_WR_RDMA_WRITE_WITH_IMM, the device
+MUST ignore \field{imm_data}.
+
+The device MUST validate the \field{addr}, \field{length} and \field{lkey}
+in \field{sg_list}.
+
+\paragraph{Read Operation}\label{sec:Device Types / Network Device / Device Operation / RoCE Support / Read Operation}
+
+The read operation allows us to read data from the local memory buffer
+in remote side with no notification. The remote side wouldn't be aware
+that this operation being done.
+
+To do a read operation, a request with \field{opcode} set to
+VIRTIO_IB_WR_RDMA_READ MUST be posted to the Send Queue as one output
+descriptor and the device is notified of the new entry.
+
+\drivernormative{\subparagraph}{Read Operation}{Device Types / Network Device / Device Operation / RoCE Support / Read Operation}
+
+The driver MUST fill \field{sg_list} to describe the read buffer.
+
+The driver MUST fill \field{rdma.remote_addr} and \field{rdma.rkey} to
+identify the remote buffer.
+
+\devicenormative{\subparagraph}{Read Operation}{Device Types / Network Device / Device Operation / RoCE Support / Read Operation}
+
+The device MUST validate the \field{addr}, \field{length} and \field{lkey}
+in \field{sg_list}.
+
+\paragraph{Completion Notification}\label{sec:Device Types / Network Device / Device Operation / RoCE Support / Completion Notification}
+
+After above operation is completed, a completion notification MUST
+be triggered by the device. To achieve that, the device MUST consume
+an entry of the Completion Queue associated with the Send Queue/Receive
+Queue which the operation belongs to.
+
+\drivernormative{\subparagraph}{Completion Notification}{Device Types / Network Device / Device Operation / RoCE Support / Completion Notification}
+
+The driver MUST fill the Completion Queue with enough entries previously.
+
+\devicenormative{\subparagraph}{Completion Notification}{Device Types / Network Device / Device Operation / RoCE Support / Completion Notification}
+
+If \field{imm_data} is valid, the device MUST set VIRTIO_IB_WC_WITH_IMM to
+\field{wc_flags}.
+
+The device MUST set \field{wr_id} to the value of \field{wr_id} of
+corresponding \field{struct virtio_rdma_sq_req} or
+\field{struct virtio_rdma_rq_req}.
+
\section{Block Device}\label{sec:Device Types / Block Device}
The virtio block device is a simple virtual block device (ie.
--
2.11.0
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]