[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [virtio-dev] [RFC PATCH v3] virtio-blk: add zoned block device specification
On Thu, 4 Aug 2022 at 18:41, Dmitry Fomichev <dmitry.fomichev@wdc.com> wrote:
Hi Dmitry,
I think RFC can be removed from the Subject line for the next revision
of this patch.
For instructions on how to bring this to a Technical Committee vote, see:
https://github.com/oasis-tcs/virtio-spec#use-of-github-issues
>
> Introduce support for Zoned Block Devices to virtio.
>
> Zoned Block Devices (ZBDs) aim to achieve a better capacity, latency
> and/or cost characteristics compared to commonly available block
> devices by getting the entire LBA space of the device divided to block
> regions that are much larger than the LBA size. These regions are
> called zones and they can only be written sequentially. More details
> about ZBDs can be found at
>
> https://zonedstorage.io/docs/introduction/zoned-storage .
>
> In its current form, the virtio protocol for block devices (virtio-blk)
> is not aware of ZBDs but it allows the guest to successfully scan a
> host-managed drive provided by the host. As the result, the
> host-managed drive appears at the guest as a regular drive that will
> operate erroneously under the most common write workloads.
>
> To fix this, the virtio-blk protocol needs to be extended to add the
> capabilities to convey the zone characteristics of host ZBDs to the
> guest and to provide the support for ZBD-specific commands - Report
> Zones, four zone operations and (optionally) Zone Append. The proposed
> standard extension aims to provide this functionality.
>
> This patch extends the virtio-blk section of virtio specification with
> the minimum set of requirements that are necessary to support ZBDs.
> The resulting device model is a subset of the models defined in ZAC/ZBC
> and ZNS standards documents. The included functionality mirrors
> the existing Linux kernel block layer ZBD support and should be
> sufficient to handle the host-managed and host-aware HDDs that are on
> the market today as well as ZNS SSDs that are entering the market at
> the moment of this patch submission.
>
> I have developed a proof of concept patch series that adds ZBD support
> to virtio-blk Linux kernel driver by implementing the protocol
> extensions defined in the spec patch. I would like to receive feedback
> on this specification patch before posting that series to the block
> LKML.
>
> I would like to thank the following people for their useful feedback
> and suggestions while working on the initial iterations of this patch.
>
> Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Matias Bjørling <Matias.Bjorling@wdc.com>
> Niklas Cassel <Niklas.Cassel@wdc.com>
> Hans Holmberg <Hans.Holmberg@wdc.com>
>
> v1 -> v2:
>
> Address Stefan's review comments:
>
> - move normative clauses to normative sections
>
> - remove the "partial" bit in zone report
>
> - change layout of virtio_blk_zoned_req. The "all" flag becomes a bit
> in "zone" bit field struct. This leaves 31 bits for potential future
> extensions. Move the status byte to be the last one in the struct
>
> - set ZBD-specific error codes in the status field, not in
> "zoned_result" field. The former "zoned_result" member now becomes
> "append_sector"
>
> - make a few editorial changes
>
> v2 -> v3:
>
> A few changes made as the result of off-list discussions with Stefan,
> Damien and Hannes:
>
> - drop virtblk_zoned_req for zoned devices and define a union for
> virtio request in header that is specific to ZONE APPEND request
>
> - drop support for ALL bit in all zone operations except for RESET
> ZONE. For this zone management operation, define a new request type,
> VIRTIO_BLK_T_ZONE_RESET_ALL. This way, the zone management out
> request header is no longer necessary
>
> - editorial changes
>
> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
> ---
> content.tex | 660 +++++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 658 insertions(+), 2 deletions(-)
>
> diff --git a/content.tex b/content.tex
> index 7508dd1..cfb8727 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -4557,6 +4557,13 @@ \subsection{Feature bits}\label{sec:Device Types / Block Device / Feature bits}
> maximum erase sectors count in \field{max_secure_erase_sectors} and
> maximum erase segment number in \field{max_secure_erase_seg}.
>
> +\item[VIRTIO_BLK_F_ZONED(17)] Device is a Zoned Block Device, that is, a device
> + that follows the zoned storage device behavior that is also supported by
> + industry standards such as the T10 Zoned Block Command standard (ZBC r05) or
> + the NVMe(TM) NVM Express Zoned Namespace Command Set Specification 1.1b
> + (ZNS). For brevity, these standard documents are referred as "ZBD standards"
> + from this point on in the text.
> +
> \end{description}
>
> \subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types / Block Device / Feature bits / Legacy Interface: Feature bits}
> @@ -4589,6 +4596,75 @@ \subsection{Device configuration layout}\label{sec:Device Types / Block Device /
> \field{max_secure_erase_sectors} \field{secure_erase_sector_alignment} are expressed
> in 512-byte units if the VIRTIO_BLK_F_SECURE_ERASE feature bit is negotiated.
>
> +If the VIRTIO_BLK_F_ZONED feature is negotiated, then in
> +\field{virtio_blk_zoned_characteristics},
> +\begin{itemize}
> +\item \field{zone_sectors} value is expressed in 512-byte sectors.
> +\item \field{max_append_sectors} value is expressed in 512-byte sectors.
> +\item \field{write_granularity} value is expressed in bytes.
> +\end{itemize}
> +
> +The \field{model} field in \field{zoned} may have the following values:
> +VIRTIO_BLK_Z_NONE(0), VIRTIO_BLK_Z_HM(1) and VIRTIO_BLK_Z_HA(2).
> +
> +\begin{lstlisting}
> +#define VIRTIO_BLK_Z_NONE 0
> +#define VIRTIO_BLK_Z_HM 1
> +#define VIRTIO_BLK_Z_HA 2
> +\end{lstlisting}
> +
> +Depending on their design, zoned block devices may follow several possible
> +models of operation. The three models that are standardized for ZBDs are
> +drive-managed, host-managed and host-aware.
> +
> +While being zoned internally, drive-managed ZBDs behave exactly like regular,
> +non-zoned block devices. For the purposes of virtio standardization,
> +drive-managed ZBDs can always be treated as non-zoned devices. These devices
> +have the VIRTIO_BLK_Z_NONE model value set in the \field{model} field in
> +\field{zoned}.
> +
> +Devices that offer VIRTIO_BLK_F_ZONED feature while reporting VIRTIO_BLK_Z_NONE
> +zoned model commonly do so for testing and development purposes.
> +
> +Host-managed zoned block devices have their LBA range divided to Sequential
> +Write Required (SWR) zones that require some additional handling from the host
> +for sustainable operation. All write requests to SWR zones must be sequential
> +and the zones with some data need to be reset before that data can be rewritten.
> +Host-managed devices support a set of ZBD-specific I/O requests that can be used
> +by the host to manage device zones. Host-managed devices report VIRTIO_BLK_Z_HM
> +in the \field{model} field in \field{zoned}.
> +
> +Host-aware zoned block devices have their LBA range divided to Sequential
> +Write Preferred (SWP) zones that support the random write access, similar to
> +regular non-zoned devices. However, the device I/O performance might not be
> +optimal if SWP zones are used in a random I/O pattern. SWP zones also support
> +the same set of ZBD-specific I/O requests as host-managed devices that allow
> +host-aware devices to be managed by any host that supports zoned block devices
> +to achieve its optimum performance. Host-aware devices report VIRTIO_BLK_Z_HA
> +in the \field{model} field in \field{zoned}.
> +
> +Both SWR zones and SWP zones are sometimes referred as sequential zones.
> +
> +During device operation, sequential zones can be in one of the following states:
> +empty, implicitly-open, explicitly-open, closed and full. The state machine that
> +governs the transitions between these states is described later in this document.
> +
> +SWR and SWP zones consume volatile device resources while being in certain
> +states and the device may set limits on the number of zones that can be in these
> +states simultaneously.
> +
> +Zoned block devices use two internal counters to account for the device
> +resources in use, the number of currently open zones and the number of currently
> +active zones.
> +
> +Any zone state transition from a state that doesn't consume a zone resource to a
> +state that consumes the same resource increments the internal device counter for
> +that resource. Any zone transition out of a state that consumes a zone resource
> +to a state that doesn't consume the same resource decrements the counter. Any
> +request that causes the device to exceed the reported zone resource limits is
> +terminated by the device with a "zone resources exceeded" error as defined for
> +specific commands later.
> +
> \begin{lstlisting}
> struct virtio_blk_config {
> le64 capacity;
> @@ -4623,6 +4699,15 @@ \subsection{Device configuration layout}\label{sec:Device Types / Block Device /
> le32 max_secure_erase_sectors;
> le32 max_secure_erase_seg;
> le32 secure_erase_sector_alignment;
> + struct virtio_blk_zoned_characteristics {
> + le32 zone_sectors;
> + le32 max_open_zones;
> + le32 max_active_zones;
> + le32 max_append_sectors;
> + le32 write_granularity;
> + u8 model;
> + u8 unused2[3];
> + } zoned;
> };
> \end{lstlisting}
>
> @@ -4686,6 +4771,10 @@ \subsection{Device Initialization}\label{sec:Device Types / Block Device / Devic
> \field{secure_erase_sector_alignment} can be used by OS when splitting a
> request based on alignment.
>
> +\item If the VIRTIO_BLK_F_ZONED feature is negotiated, the fields in
> + \field{zoned} can be read by the driver to determine the zone
> + characteristics of the device. All \field{zoned} fields are read-only.
> +
> \end{enumerate}
>
> \drivernormative{\subsubsection}{Device Initialization}{Device Types / Block Device / Device Initialization}
> @@ -4701,6 +4790,30 @@ \subsection{Device Initialization}\label{sec:Device Types / Block Device / Devic
> The driver MUST NOT read \field{writeback} before setting
> the FEATURES_OK \field{device status} bit.
>
> +Drivers SHOULD NOT negotiate VIRTIO_BLK_F_ZONED feature if they are incapable
> +of supporting devices with the VIRTIO_BLK_Z_HM or VIRTIO_BLK_Z_HA zoned model.
> +
> +If the VIRTIO_BLK_F_ZONED feature is offered by the device with the
> +VIRTIO_BLK_Z_HM zone model, then
> +\begin{itemize}
> +\item the VIRTIO_BLK_F_DISCARD feature must not be offered by the driver.
> +
> +\item if the driver sets both VIRTIO_BLK_F_DISCARD and VIRTIO_BLK_F_ZONED
> + feature bits, the device must fail by not setting FEATURES_OK bit.
> +\end{itemize}
> +
> +If the VIRTIO_BLK_F_ZONED feature is negotiated, then
> +\begin{itemize}
> +\item if the driver that can not support host-managed zoned devices
> + reads VIRTIO_BLK_Z_HM from the \field{model} field of \field{zoned}, the
> + driver MUST NOT set FEATURES_OK flag and instead set the FAILED bit.
> +
> +\item if the driver that can not support support zoned devices reads
> + VIRTIO_BLK_Z_HA from the \field{model} field of \field{zoned}, the driver
> + MAY handle the device as a non-zoned device. In this case, the
> + driver SHOULD ignore all other fields in \field{zoned}.
> +\end{itemize}
> +
> \devicenormative{\subsubsection}{Device Initialization}{Device Types / Block Device / Device Initialization}
>
> Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it
> @@ -4712,6 +4825,74 @@ \subsection{Device Initialization}\label{sec:Device Types / Block Device / Devic
> The device MUST initialize padding bytes \field{unused0} and
> \field{unused1} to 0.
>
> +If the device that is being initialized is a not a zoned device, the device
> +SHOULD NOT offer the VIRTIO_BLK_F_ZONED feature.
> +
> +If the VIRTIO_BLK_F_ZONED bit is not set by the driver,
> +\begin{itemize}
> +\item the device with the VIRTIO_BLK_Z_HA zone model SHOULD proceed with the
> + initialization while setting all zoned characteristics fields to zero.
> +
> +\item the device with the VIRTIO_BLK_Z_HM zone model MUST fail to set the
> + FEATURES_OK device status bit when the driver writes the Device Status
> + field.
> +\end{itemize}
> +
> +If the VIRTIO_BLK_F_ZONED feature is negotiated, then the \field{model} field in
> +\field{zoned} struct in the configuration space MUST be set by the device
> +\begin{itemize}
> +\item to the value of VIRTIO_BLK_Z_NONE if it operates as a drive-managed
> + zoned block device or a non-zoned block device.
> +
> +\item to the value of VIRTIO_BLK_Z_HM if it operates as a host-managed zoned
> + block device.
> +
> +\item to the value of VIRTIO_BLK_Z_HA if it operates as a host-aware zoned
> + block device.
> +\end{itemize}
> +
> +If the VIRTIO_BLK_F_ZONED feature is negotiated,
> +\begin{itemize}
> +\item the \field{zone_sectors} field of \field{zoned} MUST be set by the device
> + to the size of a single zone on the device. All zones of the device have the
> + same size indicated by \field{zone_sectors} except for the last zone that
> + MAY be smaller than all other zones. The driver can calculate the number of
> + zones on the device as
> + \begin{lstlisting}
> + nr_zones = (capacity + zone_sectors - 1) / zone_sectors;
> + \end{lstlisting}
> + and the size of the last zone as
> + \begin{lstlisting}
> + zs_last = capacity - (nr_zones - 1) * zone_sectors;
> + \end{lstlisting}
> +
> +\item The \field{max_open_zones} field of the \field{zoned} structure MUST be
> + set by the device to the maximum number of zones that can be open on the
> + device (zones in the implicit open or explicit open state). A value
> + of zero indicates that the device does not have any limit on the number of
> + open zones.
> +
> +\item The \field{max_active_zones} field of the \field{zoned} structure MUST
> + be set by the device to the maximum number zones that can be active on the
> + device (zones in the implicit open, explicit open or closed state). A value
> + of zero indicates that the device does not have any limit on the number of
> + active zones.
> +
> +\item the \field{max_append_sectors} field of \field{zoned} MUST be set by
> + the device to the maximum data size of a VIRTIO_BLK_T_ZONE_APPEND request
> + that can be successfully issued to the device. The value of this field MUST
> + NOT exceed the \field{seg_max} * \field{size_max} value. A device MAY set
> + the \field{max_append_sectors} to zero if it doesn't support
> + VIRTIO_BLK_T_ZONE_APPEND requests.
> +
> +\item the \field{write_granularity} field of \field{zoned} MUST be set by the
> + device to the offset and size alignment constraint for VIRTIO_BLK_T_OUT
> + and VIRTIO_BLK_T_ZONE_APPEND requests issued to a sequential zone of the
> + device.
> +
> +\item the device MUST initialize padding bytes \field{unused2} to 0.
> +\end{itemize}
> +
> \subsubsection{Legacy Interface: Device Initialization}\label{sec:Device Types / Block Device / Device Initialization / Legacy Interface: Device Initialization}
>
> Because legacy devices do not have FEATURES_OK, transitional devices
> @@ -4738,7 +4919,8 @@ \subsubsection{Legacy Interface: Device Initialization}\label{sec:Device Types /
> \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Operation}
>
> The driver queues requests to the virtqueues, and they are used by
> -the device (not necessarily in order). Each request is of form:
> +the device (not necessarily in order). If the VIRTIO_BLK_F_ZONED feature
> +is not negotiated, then each request is of form:
Is this sentence still needed? This revision of the spec seems to use
struct virtio_blk_req for both zoned and non-zoned devices, so I think
this sentence can be dropped.
>
> \begin{lstlisting}
> struct virtio_blk_req {
> @@ -4746,7 +4928,15 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> le32 reserved;
> le64 sector;
> u8 data[];
> - u8 status;
> + union {
> + u8 status;
> +
> + struct {
> + u8 status;
> + u8 reserved[3];
> + le64 append_sector;
Align to 8 bytes instead of 4 bytes so that append_sector has natural alignment?
> + } zone_append_in_hdr;
> + };
> };
> \end{lstlisting}
>
> @@ -4853,6 +5043,290 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> command produces VIRTIO_BLK_S_IOERR. A segment may have completed
> successfully, failed, or not been processed by the device.
>
> +The following requirements only apply if the VIRTIO_BLK_F_ZONED feature is
> +negotiated.
> +
> +In addition to the request types defined for non-zoned devices, the type of the
> +request can be a zone report (VIRTIO_BLK_T_ZONE_REPORT), an explicit zone open
> +(VIRTIO_BLK_T_ZONE_OPEN), an explicit zone close (VIRTIO_BLK_T_ZONE_CLOSE), a
> +zone finish (VIRTIO_BLK_T_ZONE_FINISH), a zone_append
> +(VIRTIO_BLK_T_ZONE_APPEND), a zone reset (VIRTIO_BLK_T_ZONE_RESET) or a zone
> +reset all (VIRTIO_BLK_T_ZONE_RESET_ALL).
> +
> +\begin{lstlisting}
> +#define VIRTIO_BLK_T_ZONE_APPEND 15
> +#define VIRTIO_BLK_T_ZONE_REPORT 16
> +#define VIRTIO_BLK_T_ZONE_OPEN 18
> +#define VIRTIO_BLK_T_ZONE_CLOSE 20
> +#define VIRTIO_BLK_T_ZONE_FINISH 22
> +#define VIRTIO_BLK_T_ZONE_RESET 24
> +#define VIRTIO_BLK_T_ZONE_RESET_ALL 26
> +\end{lstlisting}
> +
> +Requests of type VIRTIO_BLK_T_OUT, VIRTIO_BLK_T_ZONE_OPEN,
> +VIRTIO_BLK_T_ZONE_CLOSE, VIRTIO_BLK_T_ZONE_FINISH, VIRTIO_BLK_T_ZONE_APPEND,
> +VIRTIO_BLK_T_ZONE_RESET or VIRTIO_BLK_T_ZONE_RESET_ALL may be completed by the
> +device with VIRTIO_BLK_S_OK, VIRTIO_BLK_S_IOERR or VIRTIO_BLK_S_UNSUPP
> +\field{status}, or, additionally, with VIRTIO_BLK_S_ZONE_INVALID_CMD,
> +VIRTIO_BLK_S_ZONE_UNALIGNED_WP, VIRTIO_BLK_S_ZONE_OPEN_RESOURCE or
> +VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE ZBD-specific status codes.
> +
> +\begin{lstlisting}
> +#define VIRTIO_BLK_S_ZONE_INVALID_CMD 3
> +#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP 4
> +#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE 5
> +#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6
> +\end{lstlisting}
> +
> +Requests of the type VIRTIO_BLK_T_ZONE_REPORT are reads and requests of the type
> +VIRTIO_BLK_T_ZONE_APPEND transfer data from the device. VIRTIO_BLK_T_ZONE_OPEN,
> +VIRTIO_BLK_T_ZONE_CLOSE, VIRTIO_BLK_T_ZONE_FINISH, VIRTIO_BLK_T_ZONE_RESET and
> +VIRTIO_BLK_T_ZONE_RESET_ALL are non-data requests.
> +
> +In ZBD standards, the VIRTIO_BLK_T_ZONE_REPORT request belongs to "Zone
> +Management Receive" command category and VIRTIO_BLK_T_ZONE_OPEN,
> +VIRTIO_BLK_T_ZONE_CLOSE, VIRTIO_BLK_T_ZONE_FINISH and
> +VIRTIO_BLK_T_ZONE_RESET/VIRTIO_BLK_T_ZONE_RESET_ALL requests are categorized as
> +"Zone Management Send" commands. VIRTIO_BLK_T_ZONE_APPEND is categorized
> +separately from the zone management commands and is the only request that uses
> +\field{zone_append_in_hdr} structure in \field{virtio_blk_req} to return
> +to the driver the sector at which the data has been appended to the zone.
> +
> +VIRTIO_BLK_T_ZONE_REPORT is a read request that returns the information about
> +the current state of zones on the device starting from the zone containing the
> +\field{sector} of the request. The report consists of a header followed by zero
> +or more zone descriptors.
> +
> +A zone report reply has the following structure:
> +
> +\begin{lstlisting}
> +struct virtio_blk_zone_report {
> + le64 nr_zones;
> + u8 reserved[56];
> + struct virtio_blk_zone_descriptor zones[];
> +};
> +\end{lstlisting}
> +
> +The device sets the \field{nr_zones} field in the report header to the number of
> +fully transferred zone descriptors in the data buffer.
> +
> +A zone descriptor has the following structure:
> +
> +\begin{lstlisting}
> +struct virtio_blk_zone_descriptor {
> + le64 z_cap;
> + le64 z_start;
> + le64 z_wp;
> + u8 z_type;
> + u8 z_state;
> + u8 reserved[38];
> +};
> +\end{lstlisting}
> +
> +The zone descriptor field \field{z_type} \field{virtio_blk_zone_descriptor}
> +indicates the type of the zone. The available types are VIRTIO_BLK_ZT_CONV(1),
> +VIRTIO_BLK_ZT_SWR(2) or VIRTIO_BLK_ZT_SWP(3).
> +
> +\begin{lstlisting}
> +#define VIRTIO_BLK_ZT_CONV 1
> +#define VIRTIO_BLK_ZT_SWR 2
> +#define VIRTIO_BLK_ZT_SWP 3
> +\end{lstlisting}
> +
> +Read and write operations into zones with the VIRTIO_BLK_ZT_CONV (Conventional)
> +type have the same behavior as read and write operations on a regular block
> +device. Any block in a conventional zone can be read or written at any time and
> +in any order.
> +
> +Zones with VIRTIO_BLK_ZT_SWR can be read randomly, but must be written
> +sequentially at a certain point in the zone called the Write Pointer (WP). With
> +every write, the Write Pointer is incremented by the number of sectors written.
> +
> +Zones with VIRTIO_BLK_ZT_SWP can be read randomly and should be written
> +sequentially, similarly to SWR zones. However, SWP zones can accept random write
> +operations, that is, VIRTIO_BLK_T_OUT requests with a start sector different
> +from the zone write pointer position.
> +
> +The field \field{z_state} of \field{virtio_blk_zone_descriptor} indicates the
> +state of the device zone. The available zone states are VIRTIO_BLK_ZS_NOT_WP(0),
> +VIRTIO_BLK_ZS_EMPTY(1), VIRTIO_BLK_ZS_IOPEN(2), VIRTIO_BLK_ZS_EOPEN(3),
> +VIRTIO_BLK_ZS_CLOSED(4), VIRTIO_BLK_ZS_RDONLY(13), VIRTIO_BLK_ZS_FULL(14) and
> +VIRTIO_BLK_ZS_OFFLINE(15).
> +
> +\begin{lstlisting}
> +#define VIRTIO_BLK_ZS_NOT_WP 0
> +#define VIRTIO_BLK_ZS_EMPTY 1
> +#define VIRTIO_BLK_ZS_IOPEN 2
> +#define VIRTIO_BLK_ZS_EOPEN 3
> +#define VIRTIO_BLK_ZS_CLOSED 4
> +#define VIRTIO_BLK_ZS_RDONLY 13
> +#define VIRTIO_BLK_ZS_FULL 14
> +#define VIRTIO_BLK_ZS_OFFLINE 15
> +\end{lstlisting}
> +
> +Zones of the type VIRTIO_BLK_ZT_CONV are always reported by the device to be in
> +the VIRTIO_BLK_ZS_NOT_WP state. Zones of the types VIRTIO_BLK_ZT_SWR and
> +VIRTIO_BLK_ZT_SWP can not transition to the VIRTIO_BLK_ZS_NOT_WP state.
> +
> +Zones in VIRTIO_BLK_ZS_EMPTY (Empty), VIRTIO_BLK_ZS_IOPEN (Implicitly Open),
> +VIRTIO_BLK_ZS_EOPEN (Explicitly Open) and VIRTIO_BLK_ZS_CLOSED (Closed) state
> +are writable, but zones in VIRTIO_BLK_ZS_RDONLY (Read-Only), VIRTIO_BLK_ZS_FULL
> +(Full) and VIRTIO_BLK_ZS_OFFLINE (Offline) state are not. The write pointer
> +value (\field{z_wp}) is not valid for Read-Only, Full and Offline zones.
> +
> +The zone descriptor field \field{z_cap} contains the maximum number of 512-byte
> +sectors that are available to be written with user data when the zone is in the
> +Empty state. This value shall be less than or equal to the \field{zone_sectors}
> +value in \field{virtio_blk_zoned_characteristics} structure in the device
> +configuration space.
> +
> +The zone descriptor field \field{z_start} contains the 64-bit address of the
> +first 512-byte sector of the zone.
> +
> +The zone descriptor field \field{z_wp} contains the 64-bit sector address where
> +the next write operation for this zone should be issued. This value is undefined
> +for conventional zones and for zones in VIRTIO_BLK_ZS_RDONLY, VIRTIO_BLK_ZS_FULL
> +and VIRTIO_BLK_ZS_OFFLINE state.
> +
> +Depending on their state, zones consume resources as follows:
> +\begin{itemize}
> +\item a zone in VIRTIO_BLK_ZS_IOPEN and VIRTIO_BLK_ZS_EOPEN state consumes one
> + open zone resource and, additionally,
> +
> +\item a zone in VIRTIO_BLK_ZS_IOPEN, VIRTIO_BLK_ZS_EOPEN and
> + VIRTIO_BLK_ZS_CLOSED state consumes one active resource.
> +\end{itemize}
> +
> +Attempts for zone transitions that violate zone resource limits must fail with
> +VIRTIO_BLK_S_ZONE_OPEN_RESOURCE or VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE
> +\field{status}.
> +
> +Zones in the VIRTIO_BLK_ZS_EMPTY (Empty) state have the write pointer value
> +equal to the start sector of the zone. In this state, the entire capacity of the
> +zone is available for writing. A zone can transition from this state to
> +\begin{itemize}
> +\item VIRTIO_BLK_ZS_IOPEN when a successful VIRTIO_BLK_T_OUT request or
> + VIRTIO_BLK_T_ZONE_APPEND with a non-zero data size is received for the zone.
> +
> +\item VIRTIO_BLK_ZS_EOPEN when a successful VIRTIO_BLK_T_ZONE_OPEN request is
> + received for the zone
> +\end{itemize}
> +
> +When a VIRTIO_BLK_T_ZONE_RESET request is issued to an Empty zone, the request
> +is completed successfully and the zone stays in the VIRTIO_BLK_ZS_EMPTY state.
> +
> +Zones in the VIRTIO_BLK_ZS_IOPEN (Implicitly Open) state transition from
> +this state to
> +\begin{itemize}
> +\item VIRTIO_BLK_ZS_EMPTY when a successful VIRTIO_BLK_T_ZONE_RESET request is
> + received for the zone,
> +
> +\item VIRTIO_BLK_ZS_EOPEN when a successful VIRTIO_BLK_T_ZONE_OPEN request is
> + received for the zone,
> +
> +\item VIRTIO_BLK_ZS_CLOSED when a successful VIRTIO_BLK_T_ZONE_CLOSE request is
> + received for the zone,
> +
> +\item VIRTIO_BLK_ZS_CLOSED implicitly by the device when another zone is
> + entering the VIRTIO_BLK_ZS_IOPEN or VIRTIO_BLK_ZS_EOPEN state and the number
> + of currently open zones is at \field{max_open_zones} limit,
> +
> +\item VIRTIO_BLK_ZS_FULL when a successful VIRTIO_BLK_T_ZONE_FINISH request is
> + received for the zone.
> +
> +\item VIRTIO_BLK_ZS_FULL when a successful VIRTIO_BLK_T_OUT or
> + VIRTIO_BLK_T_ZONE_APPEND request that causes the zone to reach its writable
> + capacity is received for the zone.
> +\end{itemize}
> +
> +Zones in the VIRTIO_BLK_ZS_EOPEN (Explicitly Open) state transition from
> +this state to
> +\begin{itemize}
> +\item VIRTIO_BLK_ZS_EMPTY when a successful VIRTIO_BLK_T_ZONE_RESET request is
> + received for the zone,
> +
> +\item VIRTIO_BLK_ZS_EMPTY when a successful VIRTIO_BLK_T_ZONE_CLOSE request is
> + received for the zone and the write pointer of the zone has the value equal
> + to the start sector of the zone,
> +
> +\item VIRTIO_BLK_ZS_CLOSED when a successful VIRTIO_BLK_T_ZONE_CLOSE request is
> + received for the zone and the zone write pointer is larger then the start
> + sector of the zone,
> +
> +\item VIRTIO_BLK_ZS_FULL when a successful VIRTIO_BLK_T_ZONE_FINISH request is
> + received for the zone,
> +
> +\item VIRTIO_BLK_ZS_FULL when a successful VIRTIO_BLK_T_OUT or
> + VIRTIO_BLK_T_ZONE_APPEND request that causes the zone to reach its writable
> + capacity is received for the zone.
> +\end{itemize}
> +
> +When a VIRTIO_BLK_T_ZONE_EOPEN request is issued to an Explicitly Open zone, the
> +request is completed successfully and the zone stays in the VIRTIO_BLK_ZS_EOPEN
> +state.
> +
> +Zones in the VIRTIO_BLK_ZS_CLOSED (Closed) state transition from this state
> +to
> +\begin{itemize}
> +\item VIRTIO_BLK_ZS_EMPTY when a successful VIRTIO_BLK_T_ZONE_RESET request is
> + received for the zone,
> +
> +\item VIRTIO_BLK_ZS_IOPEN when a successful VIRTIO_BLK_T_OUT request or
> + VIRTIO_BLK_T_ZONE_APPEND with a non-zero data size is received for the zone.
> +
> +\item VIRTIO_BLK_ZS_EOPEN when a successful VIRTIO_BLK_T_ZONE_OPEN request is
> + received for the zone,
> +\end{itemize}
> +
> +When a VIRTIO_BLK_T_ZONE_CLOSE request is issued to a Closed zone, the request
> +is completed successfully and the zone stays in the VIRTIO_BLK_ZS_CLOSED state.
> +
> +Zones in the VIRTIO_BLK_ZS_FULL (Full) state can transition from this state to
> +VIRTIO_BLK_ZS_EMPTY when a successful VIRTIO_BLK_T_ZONE_RESET request is
> +received for the zone
> +
> +When a VIRTIO_BLK_T_ZONE_FINISH request is issued to a Full zone, the request
> +is completed successfully and the zone stays in the VIRTIO_BLK_ZS_FULL state.
> +
> +The device may automatically transition zones to VIRTIO_BLK_ZS_RDONLY
> +(Read-Only) or VIRTIO_BLK_ZS_OFFLINE (Offline) state from any other state. The
> +device may also automatically transition zones in the Read-Only state to the
> +Offline state. Zones in the Offline state may not transition to any other state.
> +Such automatic transitions usually indicate hardware failures. The previously
> +written data may only be read from zones in the Read-Only state. Zones in the
> +Offline state can not be read or written.
> +
> +VIRTIO_BLK_S_ZONE_UNALIGNED_WP is set by the device when the request received
> +from the driver attempts to perform a write to an SWR zone and at least one of
> +the following conditions is met:
> +
> +\begin{itemize}
> +\item the starting sector of the request is not equal to the current value of
> + the zone write pointer.
> +
> +\item the ending sector of the request data multiplied by 512 is not a multiple
> + of the value reported by the device in the field \field{write_granularity}
> + in the device configuration space.
> +\end{itemize}
> +
> +VIRTIO_BLK_S_ZONE_OPEN_RESOURCE is set by the device when a zone operation or
> +write request received from the driver can not be handled without exceeding the
> +\field{max_open_zones} limit value reported by the device in the configuration
> +space.
> +
> +VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE is set by the device when a zone operation or
> +write request received from the driver can not be handled without exceeding the
> +\field{max_active_zones} limit value reported by the device in the configuration
> +space.
> +
> +A zone transition request that leads to both the \field{max_open_zones} and the
> +\field{max_active_zones} limits to be exceeded is terminated by the device with
> +VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE \field{status} value.
> +
> +The device SHALL report all other error conditions related to zoned block model
> +operation by setting the VIRTIO_BLK_S_ZONE_INVALID_CMD value in
> +\field{status} of \field{virtio_blk_req} structure.
> +
> \drivernormative{\subsubsection}{Device Operation}{Device Types / Block Device / Device Operation}
>
> A driver MUST NOT submit a request which would cause a read or write
> @@ -4899,6 +5373,51 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> successfully, failed, or were processed by the device at all if the request
> failed with VIRTIO_BLK_S_IOERR.
>
> +The following requirements only apply if the VIRTIO_BLK_F_ZONED feature is
> +negotiated.
> +
> +When forming a VIRTIO_BLK_T_ZONE_REPORT request, the driver sets the sector
> +address of the starting zone to report to \field{sector}.
This is not a MUST/SHOULD/MAY statements. This is a clue that some of
these paragraphs should be moved to the non-normative section that
describes how things work. The normative sections only have
requirements for device and driver implementors, they don't explain
how the device works.
> +
> +VIRTIO_BLK_T_ZONE_OPEN, VIRTIO_BLK_T_ZONE_CLOSE, VIRTIO_BLK_T_ZONE_FINISH and
> +VIRTIO_BLK_T_ZONE_RESET requests make the zone operation to act on a particular
> +zone specified by the zone sector address in the \field{sector} of the request.
> +The zone sector address is a 64-bit value expressed in 512-byte units that
> +points at the first sector in the target zone.
Normally the struct virtio_blk_req sector field is expressed in bytes.
If I'm interpreting this text correctly the zone management commands
change the field's meaning to sector units?
> +
> +VIRTIO_BLK_T_ZONE_RESET_ALL request acts upon all applicable zones of the
> +device. For this request, the driver MUST set the field \field{sector} to zero
> +value.
> +
> +The \field{sector} field of the VIRTIO_BLK_T_ZONE_APPEND request MUST specify
> +the first sector of the zone to which data is to be appended at the position of
> +the write pointer. The zone sector address is a 64-bit value expressed in
> +512-byte units that points anywhere in the target zone. The size of the data
This "512-byte units" wording confuses me. I think the units should be
bytes and the text should say "in multiples of 512 bytes".
> +that is appended MUST NOT exceed the \field{max_append_sectors} value provided
> +by the device in \field{virtio_blk_zoned_characteristics} configuration space
> +structure.
> +
> +Upon a successful completion of a VIRTIO_BLK_T_ZONE_APPEND request, the driver
> +SHOULD read the starting sector location of the written data from the request field
> +\field{append_sector}.
Maybe that depends on the application? If the application blindly
appends and doesn't use the write pointer then there's no need to read
append_sector. I think this statement can be removed and instead the
non-normative section can describe the purpose of the append_sector
field so that driver authors know the new write pointer value is
available if they require it.
> +
> +All VIRTIO_BLK_T_OUT requests issued by the driver to sequential zones and
> +VIRTIO_BLK_T_ZONE_APPEND requests MUST have:
> +
> +\begin{enumerate}
> +\item the data size that is a multiple of the number of bytes reported
> + by the device in the field \field{write_granularity} in the
> + \field{virtio_blk_zoned_characteristics} configuration space structure.
> +
> +\item the value of the field \field{sector} that is a multiple of the number of
> + bytes reported by the device in the field \field{write_granularity} in the
> + \field{virtio_blk_zoned_characteristics} configuration space structure.
> +
> +\item the data size that will not exceed the writable zone capacity when its
> + value is added to the current value of the write pointer of the zone.
> +
> +\end{enumerate}
> +
> \devicenormative{\subsubsection}{Device Operation}{Device Types / Block Device / Device Operation}
>
> A device MUST set the \field{status} byte to VIRTIO_BLK_S_IOERR
> @@ -4990,6 +5509,143 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> simplfy passthrough implementations from eMMC devices.
> \end{note}
>
> +If the VIRTIO_BLK_F_ZONED feature is not negotiated, the device MUST reject
> +VIRTIO_BLK_T_ZONE_REPORT, VIRTIO_BLK_T_ZONE_OPEN, VIRTIO_BLK_T_ZONE_CLOSE,
> +VIRTIO_BLK_T_ZONE_FINISH, VIRTIO_BLK_T_ZONE_APPEND, VIRTIO_BLK_T_ZONE_RESET and
> +VIRTIO_BLK_T_ZONE_RESET_ALL requests with VIRTIO_BLK_S_UNSUPP status.
> +
> +The following device requirements only apply if the VIRTIO_BLK_F_ZONED feature
> +is negotiated.
> +
> +If a request of type VIRTIO_BLK_T_ZONE_OPEN, VIRTIO_BLK_T_ZONE_CLOSE,
> +VIRTIO_BLK_T_ZONE_FINISH or VIRTIO_BLK_T_ZONE_RESET is issued for a Conventional
> +zone (type VIRTIO_BLK_ZT_CONV), the device MUST complete the request with
> +VIRTIO_BLK_S_ZONE_INVALID_CMD \field{status}.
> +
> +If the zone specified by the VIRTIO_BLK_T_ZONE_APPEND request is not a SWR zone,
> +then the request SHALL be completed with VIRTIO_BLK_S_ZONE_INVALID_CMD
> +\field{status}.
> +
> +The device handles a VIRTIO_BLK_T_ZONE_OPEN request with the by attempting to
> +change the state of the zone with the \field{sector} address to
> +VIRTIO_BLK_ZS_EOPEN. If the transition to this state can not be performed, the
> +request MUST be completed with VIRTIO_BLK_S_ZONE_INVALID_CMD \field{status}. If,
> +while processing this request, the available zone resources are insufficient,
> +then the zone state does not change and the request MUST be completed with
> +VIRTIO_BLK_S_ZONE_OPEN_RESOURCE or VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE value in
> +the field \field{status}.
> +
> +The device handles a VIRTIO_BLK_T_ZONE_CLOSE request by attempting to change the
> +state of the zone with the \field{sector} address to VIRTIO_BLK_ZS_CLOSED. If
> +the transition to this state can not be performed, the request MUST be completed
> +with VIRTIO_BLK_S_ZONE_INVALID_CMD value in the field \field{status}.
> +
> +The device handles a VIRTIO_BLK_T_ZONE_FINISH request by attempting to change
> +the state of the zone with the \field{sector} address to VIRTIO_BLK_ZS_FULL. If
> +the transition to this state can not be performed, the zone state does not
> +change and the request MUST be completed with VIRTIO_BLK_S_ZONE_INVALID_CMD
> +value in the field \field{status}.
> +
> +The device handles a VIRTIO_BLK_T_ZONE_RESET request by attempting to change the
> +state of the zone with the \field{sector} address to VIRTIO_BLK_ZS_EMPTY state.
> +If the transition to this state can not be performed, the zone state does not
> +change and the request MUST be completed with VIRTIO_BLK_S_ZONE_INVALID_CMD
> +value in the field \field{status}.
> +
> +The device handles a VIRTIO_BLK_T_ZONE_RESET_ALL request by transitioning all
> +sequential device zones in VIRTIO_BLK_ZS_IOPEN, VIRTIO_BLK_ZS_EOPEN,
> +VIRTIO_BLK_ZS_CLOSED and VIRTIO_BLK_ZS_FULL state to VIRTIO_BLK_ZS_EMPTY state.
> +
> +Upon receiving a VIRTIO_BLK_T_ZONE_APPEND request or a VIRTIO_BLK_T_OUT
> +request issued to a SWR zone in VIRTIO_BLK_ZS_EMPTY or VIRTIO_BLK_ZS_CLOSED
> +state, the device attempts to perform the transition of the zone to
> +VIRTIO_BLK_ZS_IOPEN state before writing data. This transition may fail due to
> +insufficient open and/or active zone resources available on the device. In this
> +case, the request MUST be completed with VIRTIO_BLK_S_ZONE_OPEN_RESOURCE or
> +VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE value in the \field{status}.
> +
> +If the \field{sector} field in the VIRTIO_BLK_T_ZONE_APPEND request does not
> +specify the lowest sector for a zone, then the request SHALL be completed with
> +VIRTIO_BLK_S_ZONE_INVALID_CMD value in \field{status}.
> +
> +A VIRTIO_BLK_T_ZONE_APPEND request or a VIRTIO_BLK_T_OUT request that has the
> +data range that that exceeds the remaining writable capacity for the zone, then
> +the request SHALL be completed with VIRTIO_BLK_S_ZONE_INVALID_CMD value in
> +\field{status}.
> +
> +If a request of the type VIRTIO_BLK_T_ZONE_APPEND is completed with
> +VIRTIO_BLK_S_OK status, the field \field{append_sector} in
> +\field{zone_append_in_hdr} field in \field{virtio_blk_req} MUST be set by
> +the device to contain the start sector of the data written to the zone.
> +
> +A VIRTIO_BLK_T_ZONE_APPEND request that has the data size that exceeds
> +\field{max_append_sectors} configuration space value, then,
> +\begin{itemize}
> +\item if \field{max_append_sectors} configuration space value is reported as
> + zero by the device, the request SHALL be completed with VIRTIO_BLK_S_UNSUPP
> + \field{status}.
> +
> +\item if \field{max_append_sectors} configuration space value is reported as
> + a non-zero value by the device, the request SHALL be completed with
> + VIRTIO_BLK_S_ZONE_INVALID_CMD \field{status}.
> +\end{itemize}
> +
> +If a VIRTIO_BLK_T_ZONE_APPEND request, a VIRTIO_BLK_T_IN request or a
> +VIRTIO_BLK_T_OUT request issued to a SWR zone has the range that has sectors in
> +more than one zone, then the request SHALL completed with
> +VIRTIO_BLK_S_ZONE_INVALID_CMD value in the field \field{status}.
> +
> +A VIRTIO_BLK_T_OUT request that has the \field{sector} value that is not aligned
> +with the write pointer for the zone, then the request SHALL completed with
> +VIRTIO_BLK_S_ZONE_UNALIGNED_WP value in the field \field{status}.
> +
> +In order to avoid resource-related errors while opening zones implicitly, the
> +device MAY automatically transition zones in VIRTIO_BLK_ZS_IOPEN state to
> +VIRTIO_BLK_ZS_CLOSED state.
> +
> +All VIRTIO_BLK_T_OUT requests or VIRTIO_BLK_T_ZONE_APPEND requests issued
> +to a zone in the VIRTIO_BLK_ZS_RDONLY state SHALL be completed with
> +VIRTIO_BLK_S_ZONE_INVALID_CMD \field{status}.
> +
> +All requests issued to a zone in the VIRTIO_BLK_ZS_OFFLINE state SHALL be
> +completed with VIRTIO_BLK_S_ZONE_INVALID_CMD value in the field \field{status}.
> +
> +The device MUST consider the data that is read above the write pointer of a zone
> +as unwritten data. The sectors between the write pointer position and the upper
> +write boundary of the zone during VIRTIO_BLK_T_ZONE_FINISH request processing
> +are also considered unwritten data.
> +
> +When unwritten data is present in the sector range of a read request, the device
> +MUST process this data in one of the following ways -
> +
> +\begin{enumerate}
> +\item Fill the unwritten data with a device-specific byte pattern. The
> +configuration, control and reporting of this byte pattern is beyond the scope
> +of this standard. This is the preferred approach.
> +
> +\item Fail the request. Depending on the driver implementation, this may prevent
> +the device from becoming operational.
> +
> +\item Return stale, previously written data to the driver. This approach is the
> +least preferred for its obvious negative security implications.
> +\end{enumerate}
Do these semantics come from the ZBD model? They seem kind of
undesirable to me (filling with zeroes seems most sensible), but
virtio-blk devices must be able to pass through real ZBD devices, so
it makes sense to support same semantics as the ZBD model.
> +
> +If the both VIRTIO_BLK_F_ZONED and VIRTIO_BLK_F_SECURE_ERASE features are
> +negotiated, then
> +
> +\begin{enumerate}
> +\item the field \field{secure_erase_sector_alignment} in the configuration space
> +of the device MUST be a multiple of \field{zone_sectors} value reported in the
> +device configuration space.
> +
> +\item the data size in VIRTIO_BLK_T_SECURE_ERASE requests MUST be a multiple of
> +\field{zone_sectors} value in the device configuration space.
> +\end{enumerate}
> +
> +The device MUST handle a VIRTIO_BLK_T_SECURE_ERASE request in the same way it
> +handles VIRTIO_BLK_T_ZONE_RESET request for the zone range specified in the
> +VIRTIO_BLK_T_SECURE_ERASE request.
> +
> \subsubsection{Legacy Interface: Device Operation}\label{sec:Device Types / Block Device / Device Operation / Legacy Interface: Device Operation}
> When using the legacy interface, transitional devices and drivers
> MUST format the fields in struct virtio_blk_req
> --
> 2.34.1
>
Attachment:
signature.asc
Description: PGP signature
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]