OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [virtio-dev] [PATCH v3 2/2] virtio-net: use mtu size as buffer length for big packets




On 8/29/2022 7:26 PM, Gavin Li wrote:
Currently add_recvbuf_big() allocates MAX_SKB_FRAGS segments for big
packets even when GUEST_* offloads are not present on the device.
However, if guest GSO is not supported, it would be sufficient to
allocate segments to cover just up the MTU size and no further.
Allocating the maximum amount of segments results in a large waste of
buffer space in the queue, which limits the number of packets that can
be buffered and can result in reduced performance.

Therefore, if guest GSO is not supported, use the MTU to calculate the
optimal amount of segments required.

When guest offload is enabled at runtime, RQ already has packets of bytes
less than 64K. So when packet of 64KB arrives, all the packets of such
size will be dropped. and RQ is now not usable.

So this means that during set_guest_offloads() phase, RQs have to be
destroyed and recreated, which requires almost driver reload.

If VIRTIO_NET_F_CTRL_GUEST_OFFLOADS has been negotiated, then it should
always treat them as GSO enabled.

Below is the iperf TCP test results over a Mellanox NIC, using vDPA for
1 VQ, queue size 1024, before and after the change, with the iperf
server running over the virtio-net interface.

MTU(Bytes)/Bandwidth (Gbit/s)
              Before   After
   1500        22.5     22.4
   9000        12.8     25.9

Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
---
changelog:
v2->v3
- Addressed comments from Si-Wei
- Simplify the condition check to enable the optimization
v1->v2
- Addressed comments from Jason, Michael, Si-Wei.
- Remove the flag of guest GSO support, set sg_num for big packets and
   use it directly
- Recalculate sg_num for big packets in virtnet_set_guest_offloads
- Replace the round up algorithm with DIV_ROUND_UP
---
  drivers/net/virtio_net.c | 37 ++++++++++++++++++++++++-------------
  1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index e1904877d461..d2721e71af18 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -225,6 +225,9 @@ struct virtnet_info {
  	/* I like... big packets and I cannot lie! */
  	bool big_packets;
+ /* number of sg entries allocated for big packets */
+	unsigned int big_packets_sg_num;
Sorry for nit picking, but in my opinion big_packets_num_skbfrags might be a better name than big_packets_sg_num, where the comment could be written as "number of skb fragments for big packets" rather than "number of sg entries allocated for big packets".

Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>

+
  	/* Host will merge rx buffers for big packets (shake it! shake it!) */
  	bool mergeable_rx_bufs;
@@ -1331,10 +1334,10 @@ static int add_recvbuf_big(struct virtnet_info *vi, struct receive_queue *rq,
  	char *p;
  	int i, err, offset;
- sg_init_table(rq->sg, MAX_SKB_FRAGS + 2);
+	sg_init_table(rq->sg, vi->big_packets_sg_num + 2);
- /* page in rq->sg[MAX_SKB_FRAGS + 1] is list tail */
-	for (i = MAX_SKB_FRAGS + 1; i > 1; --i) {
+	/* page in rq->sg[vi->big_packets_sg_num + 1] is list tail */
+	for (i = vi->big_packets_sg_num + 1; i > 1; --i) {
  		first = get_a_page(rq, gfp);
  		if (!first) {
  			if (list)
@@ -1365,7 +1368,7 @@ static int add_recvbuf_big(struct virtnet_info *vi, struct receive_queue *rq,
/* chain first in list head */
  	first->private = (unsigned long)list;
-	err = virtqueue_add_inbuf(rq->vq, rq->sg, MAX_SKB_FRAGS + 2,
+	err = virtqueue_add_inbuf(rq->vq, rq->sg, vi->big_packets_sg_num + 2,
  				  first, gfp);
  	if (err < 0)
  		give_pages(rq, first);
@@ -3690,13 +3693,27 @@ static bool virtnet_check_guest_gso(const struct virtnet_info *vi)
  		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO));
  }
+static void virtnet_set_big_packets_fields(struct virtnet_info *vi, const int mtu)
+{
+	bool guest_gso = virtnet_check_guest_gso(vi);
+
+	/* If device can receive ANY guest GSO packets, regardless of mtu,
+	 * allocate packets of maximum size, otherwise limit it to only
+	 * mtu size worth only.
+	 */
+	if (mtu > ETH_DATA_LEN || guest_gso) {
+		vi->big_packets = true;
+		vi->big_packets_sg_num = guest_gso ? MAX_SKB_FRAGS : DIV_ROUND_UP(mtu, PAGE_SIZE);
+	}
+}
+
  static int virtnet_probe(struct virtio_device *vdev)
  {
  	int i, err = -ENOMEM;
  	struct net_device *dev;
  	struct virtnet_info *vi;
  	u16 max_queue_pairs;
-	int mtu;
+	int mtu = 0;
/* Find if host supports multiqueue/rss virtio_net device */
  	max_queue_pairs = 1;
@@ -3784,10 +3801,6 @@ static int virtnet_probe(struct virtio_device *vdev)
  	INIT_WORK(&vi->config_work, virtnet_config_changed_work);
  	spin_lock_init(&vi->refill_lock);
- /* If we can receive ANY GSO packets, we must allocate large ones. */
-	if (virtnet_check_guest_gso(vi))
-		vi->big_packets = true;
-
  	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
  		vi->mergeable_rx_bufs = true;
@@ -3853,12 +3866,10 @@ static int virtnet_probe(struct virtio_device *vdev) dev->mtu = mtu;
  		dev->max_mtu = mtu;
-
-		/* TODO: size buffers correctly in this case. */
-		if (dev->mtu > ETH_DATA_LEN)
-			vi->big_packets = true;
  	}
+ virtnet_set_big_packets_fields(vi, mtu);
+
  	if (vi->any_header_sg)
  		dev->needed_headroom = vi->hdr_len;



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]