OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: [PATCH v9 08/10] admin: command list discovery


Add commands to find out which commands does each group support,
as well as enable their use by driver.
This will be especially useful once we have multiple group types.

An alternative is per-type VQs. This is possible but will
require more per-transport work. Discovery through the vq
helps keep things contained.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 admin.tex | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 81 insertions(+), 1 deletion(-)

diff --git a/admin.tex b/admin.tex
index eeccd2e..eec12a9 100644
--- a/admin.tex
+++ b/admin.tex
@@ -91,7 +91,9 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 \hline
 opcode & Name & Command Description \\
 \hline \hline
-0x0000 - 0x7FFF & - &  Group administration commands    \\
+0x0000 & VIRTIO_ADMIN_CMD_LIST_QUERY & Provides to driver list of commands supported for this group type    \\
+0x0001 & VIRTIO_ADMIN_CMD_LIST_USE & Provides to device list of commands used for this group type \\
+0x0002 - 0x7FFF & - &  Group administration commands    \\
 \hline
 0x8000 - 0xFFFF & - & Reserved    \\
 \hline
@@ -142,6 +144,84 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
 \hline
 \end{tabular}
 
+Before sending any administration commands to the device, the driver
+needs to communicate to the device which commands it is going to
+use. Initially (after reset), only two commands are assumed to be used:
+VIRTIO_ADMIN_CMD_LIST_QUERY and VIRTIO_ADMIN_CMD_LIST_USE.
+
+Before sending any other commands for any member of a specific group to
+the device, the driver queries the supported commands via
+VIRTIO_ADMIN_CMD_LIST_QUERY and sends the commands it will use via
+VIRTIO_ADMIN_CMD_LIST_USE.
+
+Commands VIRTIO_ADMIN_CMD_LIST_QUERY and
+VIRTIO_ADMIN_CMD_LIST_USE
+both use the following structure describing the
+command opcodes:
+
+\begin{lstlisting}
+struct virtio_admin_cmd_list {
+       /* Indicates which of the below fields were returned
+       le32 device_admin_cmds[];
+};
+\end{lstlisting}
+
+This structure is an array of 32 bit values in little-endian byte
+order, in which a bit is set if the specific command opcode
+is supported. Thus, \field{device_admin_cmds[0]} refers to the first 32-bit value
+in this array corresponding to opcodes 0 to 31,
+\field{device_admin_cmds[1]} is the second 32-bit value
+corresponding to opcodes 32 to 63, etc.
+For example, the array of size 2 including
+the values 0x3 in \field{device_admin_cmds[0]}
+and 0x1 in \field{device_admin_cmds[1]} indicates that only opcodes 0, 1 and 32
+are supported.
+
+Accordingly, bits 0 and 1 corresponding to opcode 0
+(VIRTIO_ADMIN_CMD_LIST_QUERY) and 1
+(VIRTIO_ADMIN_CMD_LIST_USE) are
+always set in \field{device_admin_cmds[0]} returned by VIRTIO_ADMIN_CMD_LIST_QUERY.
+
+For the command VIRTIO_ADMIN_CMD_LIST_QUERY, \field{opcode} is set to 0x0.
+The \field{group_member_id} is unused. It is set to zero by driver.
+This command has no command specific data.
+The device, upon success, returns a result in
+\field{command_specific_result} in the format
+\field{struct virtio_admin_cmd_list} describing the
+list of administration commands supported for the given group.
+
+
+For the command VIRTIO_ADMIN_CMD_LIST_USE, \field{opcode}
+is set to 0x1.
+The \field{group_member_id} is unused. It is set to zero by driver.
+The \field{command_specific_data} is in the format
+\field{struct virtio_admin_cmd_list} describing the
+list of administration commands used by the driver.
+This command has no command specific result.
+
+The driver issues the command VIRTIO_ADMIN_CMD_LIST_QUERY to
+query the list of commands valid for this group and before sending
+any commands for any member of a group.
+
+The driver then enables use of some of the opcodes by sending to
+the device the command VIRTIO_ADMIN_CMD_LIST_USE with a subset
+of the list returned by VIRTIO_ADMIN_CMD_LIST_QUERY that is
+both understood and used by the driver.
+
+If the device supports the command list used by the driver, the
+device completes the command with status VIRTIO_ADMIN_STATUS_OK.
+If the device does not support the command list, the device
+completes the command with status
+VIRTIO_ADMIN_STATUS_INVALID_FIELD.
+
+Note: drivers are assumed not to set bits in device_admin_cmds
+if they are not familiar with how the command opcode
+is used, since devices could have dependencies between
+command opcodes.
+
+It is assumed that all members in a group support and are used
+with the same list of commands.
+
 \section{Administration Virtqueues}\label{sec:Basic Facilities of a Virtio Device / Administration Virtqueues}
 
 An administration virtqueue of an owner device is used to submit
-- 
MST



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]