OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: [PATCH v6 4/5] packed virtqueues: more efficient virtqueue layout


Performance analysis of this is in my kvm forum 2016 presentation.  The
idea is to have a r/w descriptor in a ring structure, replacing the used
and available ring, index and descriptor buffer.

This is also easier for devices to implement than the 1.0 layout.
Several more enhancements will be necessary to actually make this
efficient for devices to use.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 content.tex     |  36 ++-
 packed-ring.tex | 668 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 701 insertions(+), 3 deletions(-)
 create mode 100644 packed-ring.tex

diff --git a/content.tex b/content.tex
index 3b4579e..3059bd3 100644
--- a/content.tex
+++ b/content.tex
@@ -242,10 +242,26 @@ a used buffer to the queue - i.e. lets the driver
 know by marking the buffer as used. Device can then trigger
 a device event - i.e. send an interrupt to the driver.
 
-For queue operation detail, see \ref{sec:Basic Facilities of a Virtio Device / Split Virtqueues}~\nameref{sec:Basic Facilities of a Virtio Device / Split Virtqueues}.
+Device is not generally required to use buffers in
+the same order in which they have been made available
+by the driver.
+
+Some devices always use descriptors in the same order in which
+they have been made available. These devices can offer the
+VIRTIO_F_IN_ORDER feature. If negotiated, this knowledge
+might allow optimizations or simplify driver code.
+
+Two formats are supported: Split Virtqueues (see \ref{sec:Basic
+Facilities of a Virtio Device / Split
+Virtqueues}~\nameref{sec:Basic Facilities of a Virtio Device /
+Split Virtqueues}) and Packed Virtqueues (see \ref{sec:Basic
+Facilities of a Virtio Device / Packed
+Virtqueues}~\nameref{sec:Basic Facilities of a Virtio Device /
+Packed Virtqueues}).
 
 \input{split-ring.tex}
 
+\input{packed-ring.tex}
 \chapter{General Initialization And Device Operation}\label{sec:General Initialization And Device Operation}
 
 We start with an overview of device initialization, then expand on the
@@ -5199,10 +5215,19 @@ Currently these device-independent feature bits defined:
 \begin{description}
   \item[VIRTIO_F_RING_INDIRECT_DESC (28)] Negotiating this feature indicates
   that the driver can use descriptors with the VIRTQ_DESC_F_INDIRECT
-  flag set, as described in \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Descriptor Table / Indirect Descriptors}~\nameref{sec:Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Descriptor Table / Indirect Descriptors}.
+  flag set, as described in \ref{sec:Basic Facilities of a Virtio
+Device / Virtqueues / The Virtqueue Descriptor Table / Indirect
+Descriptors}~\nameref{sec:Basic Facilities of a Virtio Device /
+Virtqueues / The Virtqueue Descriptor Table / Indirect
+Descriptors} and
+  \ref{sec:Packed Virtqueues / Indirect Flag: Scatter-Gather Support}
+\ref{sec:Packed Virtqueues / Driver and Device Event Suppression}.
 
   \item[VIRTIO_F_RING_EVENT_IDX(29)] This feature enables the \field{used_event}
-  and the \field{avail_event} fields as described in \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Virtqueue Interrupt Suppression} and \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Used Ring}.
+  and the \field{avail_event} fields as described in
+\ref{sec:Basic Facilities of a Virtio Device / Virtqueues /
+Virtqueue Interrupt Suppression}, \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Used Ring}
+and .
 
   \item[VIRTIO_F_VERSION_1(32)] This indicates compliance with this
     specification, giving a simple way to detect legacy devices or drivers.
@@ -5212,6 +5237,9 @@ Currently these device-independent feature bits defined:
   addresses in memory.  If this feature bit is set to 0, then the device emits
   physical addresses which are not translated further, even though an IOMMU
   may be present.
+  \item[VIRTIO_F_RING_PACKED(34)] This feature indicates
+  support for the packed virtqueue layout as described in
+\ref{sec:Basic Facilities of a Virtio Device / Packed Virtqueues}.
 \end{description}
 
 \drivernormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
@@ -5225,6 +5253,8 @@ passed to the device into physical addresses in memory.  If
 VIRTIO_F_IOMMU_PLATFORM is not offered, then a driver MUST pass only physical
 addresses to the device.
 
+A driver SHOULD accept VIRTIO_F_PACKED_RING if it is offered.
+
 \devicenormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
 
 A device MUST offer VIRTIO_F_VERSION_1.  A device MAY fail to operate further
diff --git a/packed-ring.tex b/packed-ring.tex
new file mode 100644
index 0000000..ffc699c
--- /dev/null
+++ b/packed-ring.tex
@@ -0,0 +1,668 @@
+\section{Packed Virtqueues}\label{sec:Basic Facilities of a Virtio Device / Packed Virtqueues}
+
+Packed virtqueues is an alternative compact virtqueue layout using
+read-write memory, that is memory that is both read and written
+by both host and guest.
+
+Use of packed virtqueues is enabled by the VIRTIO_F_PACKED_RING
+feature bit.
+
+Packed virtqueues support up to $2^{14}$ queues, with up to $2^{15}$
+entries each.
+
+With current transports, queues are located in guest memory
+allocated by driver.
+Each packed virtqueue consists of three parts:
+
+\begin{itemize}
+\item Descriptor Ring
+\item Device Event Suppression
+\item Driver Event Suppression
+\end{itemize}
+
+Where Descriptor Ring in turn consists of descriptors,
+and where each descriptor can contain the following parts:
+
+\begin{itemize}
+\item Buffer ID
+\item Buffer Address
+\item Buffer Length
+\item Flags
+\end{itemize}
+
+A buffer consists of zero or more device-readable physically-contiguous
+elements followed by zero or more physically-contiguous
+device-writable elements (each buffer has at least one element).
+
+When the driver wants to send such a buffer to the device, it
+writes at least one available descriptor describing elements of
+the buffer into the Descriptor Ring.  The descriptor(s) are
+associated with a buffer by means of a Buffer ID stored within
+the descriptor.
+
+Driver then notifies the device. When the device has finished
+processing the buffer, it writes a used device descriptor
+including the Buffer ID into the Descriptor Ring (overwriting a
+driver descriptor previously made available), and sends an
+interrupt.
+
+Descriptor Ring is used in a circular manner: driver writes
+descriptors into the ring in order. After reaching end of ring,
+the next descriptor is placed at head of the ring.  Once ring is
+full of driver descriptors, driver stops sending new requests and
+waits for device to start processing descriptors and to write out
+some used descriptors before making new driver descriptors
+available.
+
+Similarly, device reads descriptors from the ring in order and
+detects that a driver descriptor has been made available.  As
+processing of descriptors is completed used descriptors are
+written by the device back into the ring.
+
+Note: after reading driver descriptors and starting their
+processing in order, device might complete their processing out
+of order.  Used device descriptors are written in the order
+in which their processing is complete.
+
+Device Event Suppression data structure is read-only by the
+device. It includes information for reducing the number of
+device events - i.e. interrupts to driver.
+
+Driver Event Suppression data structure is write-only by the
+device. It includes information for reducing the number of
+driver events - i.e. notifications to device.
+
+\subsection{Available and Used Ring Wrap Counters}
+\label{sec:Packed Virtqueues / Available and Used Ring Wrap Counters}
+Each of the driver and the device are expected to maintain,
+internally, a single-bit ring wrap counter initialized to 1.
+
+The counter maintained by the driver is called the Available
+Ring Wrap Counter. Driver changes the value of this counter
+each time it makes available the
+last descriptor in the ring (after making the last descriptor
+available).
+
+The counter maintained by the device is called the Used Ring Wrap
+Counter.  Device changes the value of this counter
+each time it uses the last descriptor in
+the ring (after marking the last descriptor used).
+
+It is easy to see that the Available Ring Wrap Counter in the driver matches
+the Used Ring Wrap Counter in the device when both are processing the same
+descriptor, or when all available descriptors have been used.
+
+To mark a descriptor as available and used, both driver and
+device use the following two flags:
+\begin{lstlisting}
+#define VIRTQ_DESC_F_AVAIL     7
+#define VIRTQ_DESC_F_USED      15
+\end{lstlisting}
+
+To mark a descriptor as available, driver sets the
+VIRTQ_DESC_F_AVAIL bit in Flags to match the internal Available
+Ring Wrap Counter.  It also sets the VIRTQ_DESC_F_USED bit to match the
+\emph{inverse} value.
+
+To mark a descriptor as used, device sets the
+VIRTQ_DESC_F_USED bit in Flags to match the internal Used
+Ring Wrap Counter.  It also sets the VIRTQ_DESC_F_AVAIL bit to match the
+\emph{same} value.
+
+Thus VIRTQ_DESC_F_AVAIL and VIRTQ_DESC_F_USED bits are different
+for an available descriptor and equal for a used descriptor.
+
+\subsection{Polling of available and used descriptors}
+\label{sec:Packed Virtqueues / Polling of available and used descriptors}
+
+Writes of device and driver descriptors can generally be
+reordered, but each side (driver and device) are only required to
+poll (or test) a single location in memory: next device descriptor after
+the one they processed previously, in circular order.
+
+Sometimes device needs to only write out a single used descriptor
+after processing a batch of multiple available descriptors.  As
+described in more detail below, this can happen when using
+descriptor chaining or with in-order
+use of descriptors.  In this case, device writes out a used
+descriptor with buffer id of the last descriptor in the group.
+After processing the used descriptor, both device and driver then
+skip forward in the ring the number of the remaining descriptors
+in the group until processing (reading for the driver and writing
+for the device) the next used descriptor.
+
+\subsection{Write Flag}
+\label{sec:Packed Virtqueues / Write Flag}
+
+In an available descriptor, VIRTQ_DESC_F_WRITE bit within Flags
+is used to mark a descriptor as corresponding to a write-only or
+read-only element of a buffer.
+
+\begin{lstlisting}
+/* This marks a buffer as device write-only (otherwise device read-only). */
+#define VIRTQ_DESC_F_WRITE     2
+\end{lstlisting}
+
+In a used descriptor, this bit it used to specify whether any
+data has been written by the device into any parts of the buffer.
+
+
+\subsection{Buffer Address and Length}
+\label{sec:Packed Virtqueues / Buffer Address and Length}
+
+In an available descriptor, Buffer Address corresponds to the
+physical address of the buffer. The length of the buffer assumed
+to be physically contigious is stored in Buffer Length.
+
+In a used descriptor, Buffer Address is unused. Buffer Length
+specifies the length of the buffer that has been initialized
+(written to) by the device.
+
+Buffer length is reserved for used descriptors without the
+VIRTQ_DESC_F_WRITE flag, and is ignored by drivers.
+
+\subsection{Scatter-Gather Support}
+\label{sec:Packed Virtqueues / Scatter-Gather Support}
+
+Some drivers need an ability to supply a list of multiple buffer
+elements (also known as a scatter/gather list) with a request.
+Two optional features support this: descriptor
+chaining and indirect descriptors.
+
+If neither feature has been negotiated, each buffer is
+physically-contigious, either read-only or write-only and is
+described completely by a single descriptor.
+
+While unusual (most implementations either create all lists
+solely using non-indirect descriptors, or always use a single
+indirect element), if both features have been negotiated, mixing
+direct and direct descriptors in a ring is valid, as long as each
+list only contains descriptors of a given type.
+
+Scatter/gather lists only apply to available descriptors. A
+single used descriptor corresponds to the whole list.
+
+The device limits the number of descriptors in a list through a
+transport-specific and/or device-specific value. If not limited,
+the maximum number of descriptors in a list is the virt queue
+size.
+
+\subsection{Next Flag: Descriptor Chaining}
+\label{sec:Packed Virtqueues / Next Flag: Descriptor Chaining}
+
+The VIRTIO_F_LIST_DESC feature allows driver to supply
+a scatter/gather list to the device
+by using multiple descriptors, and setting the VIRTQ_DESC_F_NEXT in
+Flags for all but the last available descriptor.
+
+\begin{lstlisting}
+/* This marks a buffer as continuing. */
+#define VIRTQ_DESC_F_NEXT   1
+\end{lstlisting}
+
+Buffer ID is included in the last descriptor in the list.  
+
+The driver always makes the the first descriptor in the list
+available after the rest of the list has been written out into
+the ring. This guarantees that the device will never observe a
+partial scatter/gather list in the ring.
+
+Device only writes out a single used descriptor for the whole
+list. It then skips forward according to the number of
+descriptors in the list. Driver needs to keep track of the size
+of the list corresponding to each buffer ID, to be able to skip
+to where the next used descriptor is written by the device.
+
+For example, if descriptors are used in the same order in which
+they are made available, this will result in the used descriptor
+overwriting the first available descriptor in the list, the used
+descriptor for the next list overwriting the first available
+descriptor in the next list, etc.
+
+VIRTQ_DESC_F_NEXT is reserved in used descriptors, and
+should be ignored by drivers.
+
+\subsection{Indirect Flag: Scatter-Gather Support}
+\label{sec:Packed Virtqueues / Indirect Flag: Scatter-Gather Support}
+
+Some devices benefit by concurrently dispatching a large number
+of large requests. The VIRTIO_F_INDIRECT_DESC feature allows this. To increase
+ring capacity the driver can store a (read-only by the device) table of indirect
+descriptors anywhere in memory, and insert a descriptor in main
+virtqueue (with \field{Flags}\&VIRTQ_DESC_F_INDIRECT on) that refers to
+a memory buffer
+containing this indirect descriptor table; \field{addr} and \field{len}
+refer to the indirect table address and length in bytes,
+respectively.
+\begin{lstlisting}
+/* This means the buffer contains a table of buffer descriptors. */
+#define VIRTQ_DESC_F_INDIRECT   4
+\end{lstlisting}
+
+The indirect table layout structure looks like this
+(\field{len} is the Buffer Length of the descriptor that refers to this table,
+which is a variable, so this code won't compile):
+
+\begin{lstlisting}
+struct indirect_descriptor_table {
+        /* The actual descriptor structures (struct Desc each) */
+        struct Desc desc[len / sizeof(struct Desc)];
+};
+\end{lstlisting}
+
+The first descriptor is located at start of the indirect
+descriptor table, additional indirect descriptors come
+immediately afterwards. \field{Flags} \&VIRTQ_DESC_F_WRITE is the
+only valid flag for descriptors in the indirect table. Others
+are reserved and are ignored by the device. 
+Buffer ID is also reserved and is ignored by the device.
+
+In Descriptors with VIRTQ_DESC_F_INDIRECT set VIRTQ_DESC_F_WRITE
+is reserved and is ignored by the device.
+
+\subsection{Multi-buffer requests}
+\label{sec:Packed Virtqueues / Multi-descriptor batches}
+Some devices combine multiple buffers as part of processing of a
+single request.  These devices always make the first
+descriptor in the request available after the rest of the request
+has been written out request the ring. This guarantees that the
+driver will never observe a partial request in the ring.
+
+
+\subsection{Driver and Device Event Suppression}
+\label{sec:Packed Virtqueues / Driver and Device Event Suppression}
+In many systems driver and device notifications involve
+significant overhead. To mitigate this overhead,
+each virtqueue includes two identical structures used for
+controlling notifications between device and driver.
+
+Driver Event Suppression structure is read-only by the
+device and controls the events sent by the device
+(e.g. interrupts).
+
+Device Event Suppression structure is read-only by
+the driver and controls the events sent by the driver
+(e.g. IO).
+
+
+Each of these Event Suppression structures controls
+both Descriptor Ring events and structure events, and
+each includes the following fields:
+
+\begin{description}
+\item [Descriptor Ring Change Event Flags] Takes values:
+\begin{itemize}
+\item 00b reserved
+\item 01b enable events
+\item 11b disable events
+\item 10b enable events for a specific descriptor
+(as specified by Descriptor Ring Change Event Offset/Wrap Counter).
+Only valid if VIRTIO_F_RING_EVENT_IDX has been negotiated.
+\end{itemize}
+\item [Descriptor Ring Change Event Offset] If Event Flags set to descriptor
+specific event: offset within the ring (in units of descriptor
+size). Event will only trigger when this descriptor is
+made available/used respectively.
+\item [Descriptor Ring Change Event Wrap Counter] If Event Flags set to descriptor
+specific event: offset within the ring (in units of descriptor
+size). Event will only trigger when Ring Wrap Counter
+matches this value and a descriptor is
+made available/used respectively.
+\end{description}
+
+After writing out some descriptors, both device and driver
+are expected to consult the relevant structure to find out
+whether interrupt should be sent.
+
+\subsubsection{Driver notifications}
+\label{sec:Packed Virtqueues / Driver notifications}
+Whenever not suppressed by Device Event Suppression,
+driver is required to notify the device after
+making changes to the virtqueue.
+
+Some devices benefit from ability to find out the number of
+available descriptors in the ring, and whether to send
+interrupts to drivers without accessing virtqueue in memory:
+for efficiency or as a debugging aid.
+
+To help with these optimizations, driver notifications
+to the device include the following information:
+
+\begin{itemize}
+\item VQ number
+\item Flags - set to 00b
+\item Offset (in units of descriptor size) within the ring
+      where the next available descriptor will be written
+\item Available Ring Wrap Counter referring to the last available
+      descriptor
+\end{itemize}
+
+\subsubsection{Structure Size and Alignment}
+\label{sec:Packed Virtqueues / Structure Size and Alignment}
+
+Each part of the virtqueue is physically-contiguous in guest memory,
+and has different alignment requirements.
+
+The memory aligment and size requirements, in bytes, of each part of the
+virtqueue are summarized in the following table:
+
+\begin{tabular}{|l|l|l|}
+\hline
+Virtqueue Part    & Alignment & Size \\
+\hline \hline
+Descriptor Ring  & 16        & $16 * $(Queue Size) \\
+\hline
+Device Event Suppression    & 4         & 4 \\
+ \hline
+Driver Event Suppression         & 4         & 4 \\
+ \hline
+\end{tabular}
+
+The Alignment column gives the minimum alignment for each part
+of the virtqueue.
+
+The Size column gives the total number of bytes for each
+part of the virtqueue.
+
+Queue Size corresponds to the maximum number of descriptors in the
+virtqueue\footnote{For example, if Queue Size is 4 then at most 4 buffers
+can be queued at any given time.}.  Queue Size value does not
+have to be a power of 2 unless enforced by the transport.
+
+\drivernormative{\subsection}{Virtqueues}{Basic Facilities of a
+Virtio Device / Packed Virtqueues}
+The driver MUST ensure that the physical address of the first byte
+of each virtqueue part is a multiple of the specified alignment value
+in the above table.
+
+\devicenormative{\subsection}{Virtqueues}{Basic Facilities of a
+Virtio Device / Packed Virtqueues}
+The device MUST start processing driver descriptors in the order
+in which they appear in the ring.
+The device MUST start writing device descriptors into the ring in
+the order in which they complete.
+Device MAY reorder descriptor writes once they are started.
+
+\subsection{The Virtqueue Descriptor Format}\label{sec:Basic
+Facilities of a Virtio Device / Packed Virtqueues / The Virtqueue
+Descriptor Format}
+
+The available descriptor refers to the buffers the driver is sending
+to the device. \field{addr} is a physical address, and the
+descriptor is identified with a buffer using the \field{id} field.
+
+\begin{lstlisting}
+struct virtq_desc {
+        /* Buffer Address. */
+        le64 addr;
+        /* Buffer Length. */
+        le32 len;
+        /* Buffer ID. */
+        le16 id;
+        /* The flags depending on descriptor type. */
+        le16 flags;
+};
+\end{lstlisting}
+
+The descriptor ring is zero-initialized.
+
+\subsection{Event Suppression Structure Format}\label{sec:Basic
+Facilities of a Virtio Device / Packed Virtqueues / Event Suppression Structure
+Format}
+
+The following structure is used to reduce the number of
+notifications sent between driver and device.
+
+\begin{lstlisting}
+__le16 desc_event_off : 15; /* Descriptor Event Offset */
+int    desc_event_wrap : 1; /* Descriptor Event Wrap Counter */
+__le16 desc_event_flags : 2; /* Descriptor Event Flags */
+\end{lstlisting}
+
+\subsection{Driver Notification Format}\label{sec:Basic
+Facilities of a Virtio Device / Packed Virtqueues / Driver Notification Format}
+
+The following structure is used to notify device of available
+descriptors:
+
+\begin{lstlisting}
+__le16 vqn : 14;
+__le16 desc_event_flags : 2;
+__le16 desc_event_off : 15;
+int    desc_event_wrap : 1;
+\end{lstlisting}
+
+\devicenormative{\subsection}{The Virtqueue Descriptor Table}{Basic Facilities of a Virtio Device / Packed Virtqueues / The Virtqueue Descriptor Table}
+A device MUST NOT write to a device-readable buffer, and a device SHOULD NOT
+read a device-writable buffer.
+A device MUST NOT use a descriptor unless it observes
+VIRTQ_DESC_F_AVAIL bit in its \field{flags} being changed.
+A device MUST NOT change a descriptor after changing it's
+VIRTQ_DESC_F_USED bit in its \field{flags}.
+
+\drivernormative{\subsection}{The Virtqueue Descriptor Table}{Basic Facilities of a Virtio Device / PAcked Virtqueues / The Virtqueue Descriptor Table}
+A driver MUST NOT change a descriptor unless it observes
+VIRTQ_DESC_F_USED bit in its \field{flags} being changed.
+A driver MUST NOT change a descriptor after changing
+VIRTQ_DESC_F_USED bit in its \field{flags}.
+
+\drivernormative{\subsection}{Scatter-Gather Support}{Basic Facilities of a
+Virtio Device / Packed Virtqueues / Scatter-Gather Support}
+A driver MUST NOT create a descriptor list longer than allowed
+by the device.
+
+A driver MUST NOT create a descriptor list longer than the Queue
+Size.
+
+This implies that loops in the descriptor list are forbidden!
+
+The driver MUST place any device-writable descriptor elements after
+any device-readable descriptor elements.
+
+A driver MUST NOT depend on the device to use more descriptors
+to be able to write out all descriptors in a list. A driver
+MUST make sure there's enough space in the ring
+for the whole list before making the first descriptor in the list
+available to the device.
+
+A driver MUST NOT make the first descriptor in the list
+available before initializing the rest of the descriptors.
+
+\devicenormative{\subsection}{Scatter-Gather Support}{Basic Facilities of a
+Virtio Device / Packed Virtqueues / Scatter-Gather Support}
+The device MUST use descriptors in a list chained by the
+VIRTQ_DESC_F_NEXT flag in the same order that they
+were made available by the driver.
+
+The device MAY limit the number of buffers it will allow in a
+list.
+
+\drivernormative{\subsection}{Indirect Descriptors}{Basic Facilities of a Virtio Device / Packed Virtqueues / The Virtqueue Descriptor Table / Indirect Descriptors}
+The driver MUST NOT set the DESC_F_INDIRECT flag unless the
+VIRTIO_F_INDIRECT_DESC feature was negotiated.   The driver MUST NOT
+set any flags except DESC_F_WRITE within an indirect descriptor.
+
+A driver MUST NOT create a descriptor chain longer than allowed
+by the device.
+
+A driver MUST NOT write direct descriptors with
+DESC_F_INDIRECT set in a scatter-gather list linked by
+VIRTQ_DESC_F_NEXT.
+\field{flags}.
+
+\subsection{Virtqueue Operation}\label{sec:Basic Facilities of a Virtio Device / Packed Virtqueues / Virtqueue Operation}
+
+There are two parts to virtqueue operation: supplying new
+available buffers to the device, and processing used buffers from
+the device.
+
+What follows is the requirements of each of these two parts
+when using the packed virtqueue format in more detail.
+
+\subsection{Supplying Buffers to The Device}\label{sec:Basic Facilities of a Virtio Device / Packed Virtqueues / Supplying Buffers to The Device}
+
+The driver offers buffers to one of the device's virtqueues as follows:
+
+\begin{enumerate}
+\item The driver places the buffer into free descriptor in the Descriptor Ring.
+
+\item The driver performs a suitable memory barrier to ensure that it updates
+  the descriptor(s) before checking for notification suppression.
+
+\item If notifications are not suppressed, the driver notifies the device
+    of the new available buffers.
+\end{enumerate}
+
+What follows is the requirements of each stage in more detail.
+
+\subsubsection{Placing Available Buffers Into The Descriptor Ring}\label{sec:Basic Facilities of a Virtio Device / Virtqueues / Supplying Buffers to The Device / Placing Available Buffers Into The Descriptor Ring}
+
+For each buffer element, b:
+
+\begin{enumerate}
+\item Get the next descriptor table entry, d
+\item Get the next free buffer id value
+\item Set \field{d.addr} to the physical address of the start of b
+\item Set \field{d.len} to the length of b.
+\item Set \field{d.id} to the buffer id
+\item Calculate the flags as follows:
+\begin{enumerate}
+\item If b is device-writable, set the VIRTQ_DESC_F_WRITE bit to 1, otherwise 0
+\item Set VIRTQ_DESC_F_AVAIL bit to the current value of the Available Ring Wrap Counter
+\item Set VIRTQ_DESC_F_AVAIL bit to inverse value
+\end{enumerate}
+\item Perform a memory barrier to ensure that the descriptor has
+      been initialized
+\item Set \field{d.flags} to the calculated flags value
+\item If d is the last descriptor in the ring, toggle the
+      Available Ring Wrap Counter
+\item Otherwise, increment d to point at the next descriptor
+\end{enumerate}
+
+This makes a single descriptor buffer available. However, in
+general the driver MAY make use of a batch of descriptors as part
+of a single request. In that case, it defers updating
+the descriptor flags for the first descriptor
+(and the previous memory barrier) until after the rest of
+the descriptors have been initialized.
+
+Once the descriptor \field{flags} is updated by the driver, this exposes the
+descriptor and its contents.  The device MAY
+access the descriptor and any following descriptors the driver created and the
+memory they refer to immediately.
+
+\drivernormative{\paragraph}{Updating flags}{Basic Facilities of
+a Virtio Device / Packed Virtqueues / Supplying Buffers to The
+Device / Updating flags}
+The driver MUST perform a suitable memory barrier before the
+\field{flags} update, to ensure the
+device sees the most up-to-date copy.
+
+\subsubsection{Notifying The Device}\label{sec:Basic Facilities
+of a Virtio Device / Packed Virtqueues / Supplying Buffers to The Device / Notifying The Device}
+
+The actual method of device notification is bus-specific, but generally
+it can be expensive.  So the device MAY suppress such notifications if it
+doesn't need them, using the Driver Event Suppression structure
+as detailed in section \ref{sec:Basic
+Facilities of a Virtio Device / Packed Virtqueues / Event
+Suppression Structure Format}.
+
+The driver has to be careful to expose the new \field{flags}
+value before checking if notifications are suppressed.
+
+\subsubsection{Implementation Example}\label{sec:Basic Facilities of a Virtio Device / Packed Virtqueues / Supplying Buffers to The Device / Implementation Example}
+
+Below is an example driver code. It does not attempt to reduce
+the number of device interrupts, neither does it support
+the VIRTIO_F_RING_EVENT_IDX feature.
+
+\begin{lstlisting}
+
+first = vq->next_avail;
+id = alloc_id(vq);
+
+for (each buffer element b) {
+        vq->desc[vq->next_avail].address = get_addr(b);
+        vq->desc[vq->next_avail].len = get_len(b);
+        init_desc(vq->next_avail, b);
+        avail = vq->avail_wrap_count;
+        used = !vq->avail_wrap_count;
+        f = get_flags(b) | (avail << VIRTQ_DESC_F_AVAIL) | (used << VIRTQ_DESC_F_USED);
+        if (vq->next_avail == first) {
+                flags = f;
+        } else {
+                vq->desc[vq->next_avail].flags = f;
+        }
+
+}
+vq->desc[vq->next_avail].id = id;
+write_memory_barrier();
+vq->desc[first].flags = flags;
+
+memory_barrier();
+
+if (vq->driver_event.flags != 0x3) {
+        notify_device(vq, vq->next_avail, vq->avail_wrap_count);
+}
+
+vq->next_avail++;
+
+if (vq->next_avail > vq->size) {
+        vq->next_avail = 0;
+        vq->avail_wrap_count \^= 1;
+}
+
+\end{lstlisting}
+
+
+\drivernormative{\paragraph}{Notifying The Device}{Basic Facilities of a Virtio Device / Packed Virtqueues / Supplying Buffers to The Device / Notifying The Device}
+The driver MUST perform a suitable memory barrier before reading
+the Driver Event Suppression structure, to avoid missing a notification.
+
+\subsection{Receiving Used Buffers From The Device}\label{sec:Basic Facilities of a Virtio Device / Packed Virtqueues / Receiving Used Buffers From The Device}
+
+Once the device has used buffers referred to by a descriptor (read from or written to them, or
+parts of both, depending on the nature of the virtqueue and the
+device), it interrupts the driver
+as detailed in section \ref{sec:Basic
+Facilities of a Virtio Device / Packed Virtqueues / Event
+Suppression Structure Format}.
+
+\begin{note}
+For optimal performance, a driver MAY disable interrupts while processing
+the used buffers, but beware the problem of missing interrupts between
+emptying the ring and reenabling interrupts.  This is usually handled by
+re-checking for more used buffers after interrups are re-enabled:
+\end{note}
+
+\begin{lstlisting}
+vq->device_event.flags = 0x3;
+
+for (;;) {
+        flags = vq->desc[vq->next_used].flags;
+        bool avail = flags & (1 << VIRTQ_DESC_F_AVAIL);
+        bool used = flags & (1 << VIRTQ_DESC_F_USED);
+
+        if (avail != used) {
+                vq->device_event.flags = 0x1;
+                mb();
+
+                flags = vq->desc[vq->next_used].flags;
+                bool avail = flags & (1 << VIRTQ_DESC_F_AVAIL);
+                bool used = flags & (1 << VIRTQ_DESC_F_USED);
+                if (avail != used) {
+                        break;
+                }
+
+                vq->device_event.flags = 0x3;
+        }
+
+        struct virtq_desc *d = vq->desc[vq->next_used];
+        process_buffer(d);
+        vq->next_used++;
+        if (vq->next_used > vq->size) {
+                vq->next_used = 0;
+        }
+}
+\end{lstlisting}
-- 
MST



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]