[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: RE: [xri-editors] Xref escaping rules
Really? So you'd prefer: xri://foo.bar/(+Gabe/#28+stuff#29) over xri://foo.bar/(+Gabe/(+stuff)) I don't see a reason why we need to do escaping for the () on XRI values as cross references.. -Gabe > -----Original Message----- > From: Dave McAlpin [mailto:dave.mcalpin@epokinc.com] > Sent: Monday, June 30, 2003 12:48 PM > To: 'Wachob, Gabe'; 'Drummond Reed'; xri-editors@lists.oasis-open.org > Subject: RE: [xri-editors] Xref escaping rules > > > I think these rules apply to cross-references in general, > both general URIs > and XRIs. > > -----Original Message----- > From: Wachob, Gabe [mailto:gwachob@visa.com] > Sent: Monday, June 30, 2003 12:05 PM > To: 'Dave McAlpin'; Wachob, Gabe; 'Drummond Reed'; > xri-editors@lists.oasis-open.org > Subject: RE: [xri-editors] Xref escaping rules > > Dave- > This seems straightforward and I don't know why it > wasn't the first > proposal on the table. I can't seem to figure out a problem > with it, so +1 > unless someone can discover an issue with it. > > BTW, the way I read it is that this escaping is only > neccesary for > URIs as xrefs, not XRI values as xrefs... > > -Gabe > > > -----Original Message----- > > From: Dave McAlpin [mailto:dave.mcalpin@epokinc.com] > > Sent: Monday, June 30, 2003 10:08 AM > > To: 'Wachob, Gabe'; 'Drummond Reed'; > xri-editors@lists.oasis-open.org > > Subject: RE: [xri-editors] Xref escaping rules > > > > > > I assumed we would escape iteratively, once for each level > of nesting > > > > 1) Embed http://foo.com?id=21#bar in xri:@foo/baz as a > cross-reference > > > > a) Escape cross-reference to get > > http://foo.com%3Fid=21%23bar > > > > b) Add as cross-reference > > xri:@foo/baz/(http://foo.com%3Fid=21%23bar) > > > > When the cross-reference is extracted, it's unescaped to > > > > http://foo.com?id=21#bar > > > > 2) Embed http://foo.com?id=21-%28widget#bar in xri:@foo/baz as a > > cross-refrence > > > > a) Escape the cross-reference to get > > http://foo.com%3Fid=21-%2528widget%23bar > > > > b) Append as cross-reference > > xri:@foo/baz/(http://foo.com%3Fid=21-%2528widget%23bar) > > > > When the cross-reference is extracted, it's unescaped to > > > > http://foo.com?id=21-%28widget#bar > > > > 3) A complex nested example. Embed http://foo.com?id=21-%28widget in > > xri:+foo.bar.<xref>, which is in turn embedded in > > xri://foo.bar/<xref>/baz > > > > a) First escape the innermost cross-reference to get > > http://foo.com%3Fid=21-%2528widget > > > > b) Add as cross-reference > > xri:+foo.bar.(http://foo.com%3Fid=21-%2528widget) > > > > c) Escape the cross-reference to get > > xri:+foo.bar.(http://foo.com%253Fid=21-%252528widget) > > > > d) Add as cross-reference > > xri://foo.bar/(xri:+foo.bar.(http://foo.com%253Fid=21-%252528w > > idget)))/baz > > > > When the XRI is evaluated, the outermost cross-reference is > extracted > > > > xri:+foo.bar.(http://foo.com%253Fid=21-%252528widget)) > > > > And unescaped to give > > > > xri:+foo.bar.(http://foo.com%3Fid=21-%2528widget)) > > > > The next level cross-reference is extracted > > > > http://foo.com%3Fid=21-%2528widget > > > > and unescaped to give > > > > http://foo.com?id=21-%28widget > > > > Dave > > > > -----Original Message----- > > From: Wachob, Gabe [mailto:gwachob@visa.com] > > Sent: Monday, June 30, 2003 9:19 AM > > To: 'Drummond Reed'; xri-editors@lists.oasis-open.org > > Subject: RE: [xri-editors] Xref escaping rules > > > > Drummond- > > This seems pretty reasonable. > > > > Have you considered the case where you have two levels of cross > > referencing? That is, a cross reference which contains an XRI > > value that > > itself has a cross reference? > > > > xri://foo.bar/(+foo.bar.(http://www.foo.com#3ffoo))/baz > > > > vs > > > > xri://foo.bar/(+foo.bar.(http://www.foo.com(#3f)foo))/baz > > > > vs > > > > xri://foo.bar/(+foo.bar.(http://www.foo.com((#3f))foo))/baz > > > > I think you need to amend the rules about escaping/unescaping > > to account for > > nesting.. > > > > -Gabe > > > > > > > -----Original Message----- > > > From: Drummond Reed [mailto:drummond.reed@onename.com] > > > Sent: Sunday, June 29, 2003 1:15 PM > > > To: xri-editors@lists.oasis-open.org > > > Subject: [xri-editors] Xref escaping rules > > > > > > > > > Here's the escaping proposal that I brought up on the > last TC call. > > > > > > The issue is that an XRI or URI is used as a cross-reference > > > may contain > > > characters that must be escaped in order to conform with 2396. > > > Specifically: > > > > > > * "?" may not appear until the start of the one-and-only > > query segment > > > allowed by 2396. > > > * The same is true with "#" for fragments > > > * Lastly, an UNMATCHED opening or closing paren must be > > > escaped or else > > > the cross-reference will not parse correctly. (Note that > > > MATCHED opening > > > and closing parens inside do not need escaping because they > > represent > > > either a second-level nested cross-reference or a parenthetically > > > enclosed string in a native URI but either way will not be > > ambiguous.) > > > > > > However we can't use just 2396 escaping rules (i.e., "%xx" > > where xx is > > > the hex value of the character) for these four characters > > > because it if > > > the embedded XRI or URI contained those same escape sequences > > > natively, > > > it would be ambiguous which to unescape and not to > unescape when the > > > cross-reference is extracted. For example, if a URI already > > contained > > > the escape sequence %3F (the "?" character) before it was > > > turned into a > > > cross-reference, how would the parser know NOT to unescape it when > > > extracting the cross-reference? > > > > > > The proposed solution is to apply two special escaping > rules to any > > > URI/XRI string being embedded as a cross-reference. They must > > > be applied > > > in the following order: > > > > > > 1) Parse the string to find any instance of "%3F", "%23", > "%28", or > > > "%29" and enclose these in parens. Example: "(%3F)". > > > 2) Escape any "?", "#", or UNMATCHED paren as per 2396 escaping. > > > Example: a URI that contained a query would have the "?" > turned into > > > %3F. > > > > > > To extract a cross-reference, apply the same two rules in > > > reverse, i.e.: > > > > > > 1) From the extracted cross-reference, escape any instance of > > > %3F, %23, > > > %28, or %29 EXCEPT those enclosed in parens. > > > 2) For any instance of "%3F", "%23", "%28", or "%29" enclosed > > > in parens, > > > remove the parens. > > > > > > Example: > > > > > > Embed: URI "http://foo.com/?id=21#bar" in XRI "xri:@foo/baz/" > > > Result: "xri:@foo/baz/(http://foo.com/%3Fid=21%23bar)" > > > > > > > > > Embed: URI "http://foo.com/?id=21-%28widget#bar" in XRI > > > "xri:@foo/baz/" > > > Result: "xri:@foo/baz/(http://foo.com/%3Fid=21-(%28)widget%23bar)" > > > > > > Does this work for everyone? Any other proposals? > > > > > > =Drummond > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: > xri-editors-unsubscribe@lists.oasis-open.org > > > For additional commands, e-mail: > > xri-editors-help@lists.oasis-open.org > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: xri-editors-unsubscribe@lists.oasis-open.org > > For additional commands, e-mail: > xri-editors-help@lists.oasis-open.org > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: xri-editors-unsubscribe@lists.oasis-open.org > > For additional commands, e-mail: > xri-editors-help@lists.oasis-open.org > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: xri-editors-unsubscribe@lists.oasis-open.org > For additional commands, e-mail: xri-editors-help@lists.oasis-open.org > > >
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]