[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: RE: [plcs-dex] Sourceforge is up!
Hi For PLCS and DEXlib - If you have a version of stepmod checked out, I would recommend that you DO NOT check out a new version. The reason being that several modules have been changed on Sourceforge as a second edition of them is being prepared. I will upload a copy of stepmod that was used to build the AP to http://www.plcs-resources.org/ sometime this week. Regards Rob ------------------------------------------- Rob Bodington Eurostep Limited Web Page: http://www.eurostep.com http://www.share-a-space.com Email: Rob.Bodington@eurostep.com Phone: +44 (0)1452 810 960 Mobile: +44 (0)7796 176 401 > -----Original Message----- > From: Rob Bodington [mailto:rob.bodington@eurostep.com] > Sent: 15 May 2006 08:28 > To: 'Hendrix, Thomas E'; AP-INTEROP-L@ATICORP.ORG; StepMod@tc184-sc4.org; > plcs-dex@lists.oasis-open.org > Cc: 'Josh Lubell' > Subject: RE: [plcs-dex] Sourceforge is up! > > Thanks Tom > > In the past when sourceforge changed things several people had difficulty > because they tried to use their old version of stepmod/dexlib without > checking out a new one. So just to reinforce the point: > > You CANNOT use a local version of dexlib or stepmod that you previously > checked out. You DO NEED tocheck out a new version of dexlib and stepmod. > (Unless you change the CVSROOT of all the directories that you have > checked > out - but I would only recommend doing that if you know what you are > doing) > > > > I could not get the checkout to work using: > :ext:stepmod_ssh2:/cvsroot/dexlib > > So I changed the CVSROOT to: > :ssh:myusername@dexlib.cvs.sourceforge.net:/cvsroot/dexlib > > This worked. (obviously change myusername) > > BTW - if you are using WinCvS and Putty, SourceForge provide a useful help > file > https://sourceforge.net/docs/F05/en/#top > > > Regards > Rob > ------------------------------------------- > Rob Bodington > Eurostep Limited > Web Page: http://www.eurostep.com http://www.share-a-space.com > Email: Rob.Bodington@eurostep.com > Phone: +44 (0)1452 810 960 > Mobile: +44 (0)7796 176 401 > > > > -----Original Message----- > > From: Hendrix, Thomas E [mailto:thomas.e.hendrix@boeing.com] > > Sent: 12 May 2006 22:58 > > To: AP-INTEROP-L@ATICORP.ORG; StepMod@tc184-sc4.org; plcs- > dex@lists.oasis- > > open.org > > Cc: Josh Lubell > > Subject: [plcs-dex] Sourceforge is up! > > > > Dear all, > > > > Sourceforge is finally up. I just committed a couple of changes to > > stepmod. But first I had to check out a new sandbox following the new > > procedure, see earlier note from Josh (for some, forwarded by me). > > > > For what they're worth, here are my session notes. > > > > --------------------------- > > > > 1. created directories newprod/stepmod (since I eventually will check > > out all modules in project stepmod) > > > > Putty 0.58 > > > > 2. loaded my saved ssh putty session (named in my case ssh2_dsa) into a > > new session > > 3. changed hostname to > > stepmod.cvs.sourceforge > > 4. saved with a new name stepmod_ssh2 (since I guess I will need > > another for dexlib) > > > > Wincvs 2.0.2 > > > > 5. navigated to newprod/stepmod in the window near the top (select > > icon to right of down arrow). > > 6. selected Pulldown Remote > Checkout Module > > > > 7. entered for module name and path on the server: > > stepmod > > > > 8. entered this string as CVSROOT > > :ext:stepmod_ssh2:/cvsroot/stepmod > > > > 9. crossed my fingers > > > > 10. pushed OK > > > > - got the WinCvs Alert dialog box asking if I trusted the server. I > > said yes. > > > > It's working! > > > > Oops ! Aborted by server during module "contract" > > (continuing) > > - update > > > > Hooray, success! Elasped time ~55 minutes > > > > Now I repeated for dexlib, except replacing stepmod with dexlib > > everywhere. > > Hooray! - 30 more minutes. > > > > Now to locate all those red or question marked files and copy to new > > sandbox. blah! > > > > - opened old sandbox with wincvs, new with folder explorer > > - displayed changed files, unknown files > > - dragged one folder's files at at time to new location. > > > > Now to locate all the incorrect variables and shortcuts. Well, maybe > > later. > > > > ------------------------------ > > > > > > Regards, > > > > Tom > > > > Thomas E. Hendrix > > Phone: 206-544-5276 > > thomas.e.hendrix@boeing.com > > > > -----Original Message----- > > From: Josh Lubell [mailto:lubell@NIST.GOV] > > Sent: Friday, May 12, 2006 8:44 AM > > To: AP-INTEROP-L@ATICORP.ORG > > Subject: [Fwd: SUBJECT: SourceForge.net: CVS service offering changes] > > > > This email explains why folks are unable to use stepmod CVS. The good > > news is that relief is coming soon, and future reliability promises to > > be better. The bad news is that you'll need to check out a new working > > copy of stepmod because the CVS host name is changing from > > cvs.sourceforge.net to stepmod.cvs.sourceforge.net. > > > > Josh > > > > -- > > Josh Lubell, NIST > > Manufacturing Systems Integration Division 100 Bureau Drive, Stop 8263 > > Gaithersburg MD 20899-8263 USA > > Phone: 1-301-975-3563, Email: lubell@nist.gov >
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]