OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-dev message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [PATCH] pci: use msix_config instead of config_msix_vector


On Fri, Oct 11, 2019 at 10:42:03AM +0100, Stefan Hajnoczi wrote:
> The struct virtio_pci_common_cfg field is called msix_config but the
> text refers to this field as config_msix_vector.  This is confusing.
> 
> Rename config_msix_vector to msix_config.  Although config_msix_vector
> is arguably a clearer name, existing code using Linux virtio_pci.h uses
> msix_config so let's stick with that.
> 
> Fixes: https://github.com/oasis-tcs/virtio-spec/issues/41
> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
> ---
> Note that Paolo already submitted a patch for the other approach and I
> even reviewed it:
> https://lists.oasis-open.org/archives/virtio/201903/msg00073.html
> 
> Either way, let's merge a fix!

OK I'll start voting on Paolo's patch as it was here earlier.
If that fails we'll vote on yours?

> ---
>  content.tex | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/content.tex b/content.tex
> index 679391e..ae0b790 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -843,7 +843,7 @@ \subsubsection{Common configuration structure layout}\label{sec:Virtio Transport
>          The driver writes this to accept feature bits offered by the device.
>          Driver Feature Bits selected by \field{driver_feature_select}.
>  
> -\item[\field{config_msix_vector}]
> +\item[\field{msix_config}]
>          The driver sets the Configuration Vector for MSI-X.
>  
>  \item[\field{num_queues}]
> @@ -1202,7 +1202,7 @@ \subsubsection{Legacy Interfaces: A Note on PCI Device Layout}\label{sec:Virtio
>  \hline
>  Read/Write & R+W            & R+W    \\
>  \hline
> -Purpose (MSI-X) & \field{config_msix_vector}  & \field{queue_msix_vector} \\
> +Purpose (MSI-X) & \field{msix_config}  & \field{queue_msix_vector} \\
>  \hline
>  \end{tabular}
>  
> @@ -1323,11 +1323,11 @@ \subsubsection{Device Initialization}\label{sec:Virtio Transport Options / Virti
>  \paragraph{MSI-X Vector Configuration}\label{sec:Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation / Device Initialization / MSI-X Vector Configuration}
>  
>  When MSI-X capability is present and enabled in the device
> -(through standard PCI configuration space) \field{config_msix_vector} and \field{queue_msix_vector} are used to map configuration change and queue
> +(through standard PCI configuration space) \field{msix_config} and \field{queue_msix_vector} are used to map configuration change and queue
>  interrupts to MSI-X vectors. In this case, the ISR Status is unused.
>  
>  Writing a valid MSI-X Table entry number, 0 to 0x7FF, to
> -\field{config_msix_vector}/\field{queue_msix_vector} maps interrupts triggered
> +\field{msix_config}/\field{queue_msix_vector} maps interrupts triggered
>  by the configuration change/selected queue events respectively to
>  the corresponding MSI-X vector. To disable interrupts for an
>  event type, the driver unmaps this event by writing a special NO_VECTOR
> @@ -1359,7 +1359,7 @@ \subsubsection{Device Initialization}\label{sec:Virtio Transport Options / Virti
>  Device MUST support unmapping any event type.
>  
>  The device MUST return vector mapped to a given event,
> -(NO_VECTOR if unmapped) on read of \field{config_msix_vector}/\field{queue_msix_vector}.
> +(NO_VECTOR if unmapped) on read of \field{msix_config}/\field{queue_msix_vector}.
>  The device MUST have all queue and configuration change
>  events are unmapped upon reset.
>  
> @@ -1367,7 +1367,7 @@ \subsubsection{Device Initialization}\label{sec:Virtio Transport Options / Virti
>  unless it is impossible for the device to satisfy the mapping
>  request.  Devices MUST report mapping
>  failures by returning the NO_VECTOR value when the relevant
> -\field{config_msix_vector}/\field{queue_msix_vector} field is read. 
> +\field{msix_config}/\field{queue_msix_vector} field is read. 
>  
>  \drivernormative{\subparagraph}{MSI-X Vector Configuration}{Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation / Device Initialization / MSI-X Vector Configuration}
>  
> @@ -1485,9 +1485,9 @@ \subsubsection{Notification of Device Configuration Changes}\label{sec:Virtio Tr
>  
>    \item If MSI-X capability is enabled:
>      \begin{enumerate}
> -    \item If \field{config_msix_vector} is not NO_VECTOR,
> +    \item If \field{msix_config} is not NO_VECTOR,
>        request the appropriate MSI-X interrupt message for the
> -      device, \field{config_msix_vector} sets the MSI-X Table entry
> +      device, \field{msix_config} sets the MSI-X Table entry
>        number.
>      \end{enumerate}
>  \end{itemize}
> @@ -1497,7 +1497,7 @@ \subsubsection{Notification of Device Configuration Changes}\label{sec:Virtio Tr
>  
>  \devicenormative{\paragraph}{Notification of Device Configuration Changes}{Virtio Transport Options / Virtio Over PCI Bus / PCI-specific Initialization And Device Operation / Notification of Device Configuration Changes}
>  
> -If MSI-X capability is enabled and \field{config_msix_vector} is
> +If MSI-X capability is enabled and \field{msix_config} is
>  NO_VECTOR, the device MUST NOT deliver an interrupt
>  for device configuration space changes.
>  
> @@ -1527,7 +1527,7 @@ \subsubsection{Driver Handling Interrupts}\label{sec:Virtio Transport Options /
>          device, to see if any progress has been made by the device
>          which requires servicing.
>        \item
> -        If the MSI-X vector is equal to \field{config_msix_vector},
> +        If the MSI-X vector is equal to \field{msix_config},
>          re-examine the configuration space to see what changed.
>      \end{itemize}
>  \end{itemize}
> -- 
> 2.21.0


[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]