OASIS Mailing List ArchivesView the OASIS mailing list archive below
or browse/search using MarkMail.

 


Help: OASIS Mailing Lists Help | MarkMail Help

virtio-comment message

[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]


Subject: Re: [virtio-comment] Re: [virtio-dev] Re: [Proposal] Relationship between XDP and rx-csum in virtio-net


On Tue, May 23, 2023 at 09:51:44PM +0800, Heng Qi wrote:
> On Tue, May 23, 2023 at 09:30:28AM -0400, Michael S. Tsirkin wrote:
> > On Tue, May 23, 2023 at 05:18:20PM +0800, Heng Qi wrote:
> > > On Tue, May 23, 2023 at 03:15:37AM -0400, Michael S. Tsirkin wrote:
> > > > On Tue, May 23, 2023 at 10:41:18AM +0800, Heng Qi wrote:
> > > > > On Mon, May 22, 2023 at 03:10:05PM -0400, Michael S. Tsirkin wrote:
> > > > > > On Mon, May 22, 2023 at 08:12:00PM +0800, Heng Qi wrote:
> > > > > > > 1) Add a feature bit to the virtio specification to tell the sender that a fully
> > > > > > > csumed packet must be sent.
> > > > > > 
> > > > > > Who is the sender in this picture? The driver?
> > > > > 
> > > > > The device or the driver.
> > > > > 
> > > > > When the device is hw, the sender is more likely to be a device.
> > > > > When the device is sw, the sender can be a device or a driver.
> > > > >
> > > > > But in general, this feature is inclined to constrain the behavior of the device and
> > > > > the driver from the receiving side.
> > > > 
> > > > Based on above I am guessing you are talking about driver getting
> > > > packets from device, I wish you used terms from virtio spec.
> > > 
> > > Yes, I'm going to use the terminology of the virtio spec.
> > > 
> > > > 
> > > > > For example: 
> > > > > VIRTIO_NET_F_UNNECESSARY_CSUM : The driver tells the device that you must send me a fully csumed packet.
> > > > > 
> > > > > Then the specific implementation can be
> > > > > 
> > > > > (1) the sender sends a fully csumed packet;
> > > > > (2) the receiver receives a CHECKSUM_PARTIAL packet, and the device helps calculate the fully csum
> > > > >     (because the two parties in the communication are located on the same host, the packet is trusted.).
> > > > > 
> > > > > In summary, if VIRTIO_NET_F_UNNECESSARY_CSUM is negotiated, the driver will no longer receive any packets marked CHECKSUM_PARTIAL.
> > > > > 
> > > > > Thanks.
> > > > 
> > > > This is what clearing VIRTIO_NET_F_GUEST_CSUM does.
> > > 
> > > Yes, but with VIRTIO_NET_F_GUEST_CSUM cleared, although the device can
> > > receive a fully checksummed packet, we can no longer enjoy
> > > the device's ability to validate the packet checksum. That is, the value
> > > of \field{flags} in the virtio_net_hdr structure is set to 0, which means
> > > that the packet received by the driver will not be marked as
> > > VIRTIO_NET_HDR_F_DATA_VALID.
> > > 
> > > So, we need a feature bit (let's say VIRTIO_NET_F_UNNECESSARY_CSUM).
> > > If VIRTIO_NET_F_UNNECESSARY_CSUM is negotiated, the device must give the
> > > driver a fully checksummed packet, and the packet is validated by the
> > > device with \field{flags} set to VIRTIO_NET_HDR_F_DATA_VALID.
> > > 
> > > > 
> > > > I feel you are trying to say that clearing VIRTIO_NET_F_GUEST_CSUM
> > > > disables all offloads but you want to keep some of them?
> > > > 
> > > 
> > > No, what I mean is that a feature VIRTIO_NET_F_UNNECESSARY_CSUM is needed
> > > in addition to VIRTIO_NET_F_GUEST_CSUM, if both features are negotiated,
> > > then the driver may always receive packets marked as
> > > VIRTIO_NET_HDR_F_DATA_VALID, which means that we can now load XDP at the
> > > same time.
> > 
> > Makes no sense to me. VIRTIO_NET_F_GUEST_CSUM set already allows
> > VIRTIO_NET_HDR_F_DATA_VALID:
> 
> We need to focus on what happens when the XDP program is loaded:
> 
> The current virtio-net needs to turn off the VIRTIO_NET_F_GUEST_CSUM
> feature when loading XDP. The main reason for doing this is because
> VIRTIO_NET_F_GUEST_CSUM allows to receive packets marked as
> VIRTIO_NET_HDR_F_NEEDS_CSUM. Such packets are not compatible with
> XDP programs, because we cannot guarantee that the csum_{start, offset}
> fields are correct after XDP modifies the packets.

What do you want the device to do with these packets?
Just clear VIRTIO_NET_HDR_F_NEEDS_CSUM?
Then ... why don't you have the driver clear that bit?

> So in order for the driver to continue to enjoy the device's ability to
> validate packets while XDP is loaded, we need a new feature to tell the
> device not to deliver packets marked as VIRTIO_NET_HDR_F_NEEDS_CSUM (in
> other words, the device can only deliver packets marked as
> VIRTIO_NET_HDR_F_DATA_VALID).
> 
> Thanks.




> > \item If the VIRTIO_NET_F_GUEST_CSUM feature was negotiated, the
> >   VIRTIO_NET_HDR_F_NEEDS_CSUM bit in \field{flags} can be
> >   set: if so, the packet checksum at offset \field{csum_offset}
> >   from \field{csum_start} and any preceding checksums
> >   have been validated.  The checksum on the packet is incomplete and
> >   if bit VIRTIO_NET_HDR_F_RSC_INFO is not set in \field{flags}, 
> >   then \field{csum_start} and \field{csum_offset} indicate how to calculate it
> >   (see Packet Transmission point 1).
> > 
> > Did you maybe mean if either feature is negotiated?
> > 
> > 
> > 
> > > > Again please use virtio terminology not Linux. to help you out,
> > > > in current linux, VIRTIO_NET_HDR_F_NEEDS_CSUM and VIRTIO_NET_HDR_F_DATA_VALID
> > > > will set CHECKSUM_PARTIAL and CHECKSUM_UNNECESSARY respectively.
> > > > 
> > > 
> > > Sure. Will do as you suggested.
> > > 
> > > Thanks.
> > > 
> > > > 
> > > > -- 
> > > > MST
> > > > 
> > > > 
> > > > ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> > 
> > 
> > This publicly archived list offers a means to provide input to the
> > OASIS Virtual I/O Device (VIRTIO) TC.
> > 
> > In order to verify user consent to the Feedback License terms and
> > to minimize spam in the list archive, subscription is required
> > before posting.
> > 
> > Subscribe: virtio-comment-subscribe@lists.oasis-open.org
> > Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
> > List help: virtio-comment-help@lists.oasis-open.org
> > List archive: https://lists.oasis-open.org/archives/virtio-comment/
> > Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
> > List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
> > Committee: https://www.oasis-open.org/committees/virtio/
> > Join OASIS: https://www.oasis-open.org/join/



[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]